Used Disc Valve Dn50 for sale (12,424)

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Iedpfxeztc Tds Aipetk Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Ijdpfjzpbazsx Aipstk Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve Itjdpfx Aied I I Hnepjk -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Itsdpju Ebk Hefx Aipek

Condition: good (used), Solenoid valve, disc valve, flap valve, electromagnetic valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschröder, gas solenoid valve -Type: MK 5 R3 B2891 Itedpfxjgh Dwvs Aipek -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Iodpjztza Ajfx Aipstk Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll Isdpfx Aieymcmfepstk - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: used, maximum load weight: 27,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2001, next inspection (TÜV): 11/2026, loading space volume: 60 m³, Equipment: ABS, Spitzer SK 2760 CAL | 60 m³ Silo Semi-Trailer | BPW | Speedline VIN: 6S11457 CHASSIS / COMPONENTS * 3 x BPW EcoPlus axles * Air suspension * Disc brakes * WABCO Trailer EBS 4S/2M+1 * NATO connector * Raise/lower valve * JOST / haacon support jacks * 3 x storage boxes * Fire extinguisher box * Speedline aluminum rims BODY * Spitzer silo for dust and granular goods * Type: SK 2760 CAL * Volume: 60 m³ * Operating pressure: 2.00 bar * Test pressure: 3.00 bar * Next external inspection: 03/2027 * Next internal inspection: TIRES * Axle 1: 385/65 R22.5, remaining tread approx. 30% / 30% * Axle 2: 385/65 R22.5, remaining tread approx. 60% / 50% * Axle 3: 385/65 R22.5, remaining tread approx. 10% / 10% WEIGHTS * Permissible total weight: 34,000 kg * Tare weight: 6,900 kg * Payload: 27,100 kg OTHER * German vehicle * MOT: 11/2026 Itsdpfx Aijzhdbropek * Inspection report: New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & spelling errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for our customers. A particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organization of special transport We will gladly assist you with organizing special transport. Day passes / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling customs formalities We will gladly assist you with handling customs matters.

Condition: used, maximum load weight: 34,880 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 10/2009, loading space volume: 34 m³, Year of construction: 2009, Equipment: ABS, Stock no. 5835 34,000 liter Spitzer tank trailer with 4,000 liter Vogelsang pump / trailing axle / aluminum rims ---- * Manufacturer: Spitzer * Type: SF2734/2P * First registration: 10/2009 * Gross vehicle weight: 40,000 kg * Unladen weight according to vehicle registration document: 5,120 kg * Payload: 34,880 kg * Axles: 3 x BPW / 3rd axle is a trailing axle / disc brakes * Suspension: Air suspension * Tires: 385/65 R 22.5, approximately 50% tread, on aluminum rims * EBS Wabco * Color: Blue/White * Operating temperature from -20 degrees to +80 degrees * 2 funnel cones * 2 baffle plates * 3 dome lids, screw-on * Vogelsang 4000 liter rotary lobe pump, type VS 136-2106 * Sight glass on the front left * 2 outlets, left + right * Flushing connections with 3 valves to flush both outlets separately * Access with walkway on the left, pneumatically operated from below * Individual fenders * Open hose storage on the right * Full load supports * Loading pressure gauge * LED reversing lights * Work lights on the side * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Itodpfx Asy T Dlqjipjk Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, Used stainless steel transport container / storage container Item number: 10837 Last intended use: Food Volume: approx. 650L Type: Standing on four feet with forklift tunnel Material (wetted parts): 1.4301 / AISI304 Isdpfjwcd T Hjx Aipjtk Design: Single-walled Container dimensions: Manhole: 400mm Outer diameter: 1000mm Cyl. Height: 800mm Total height: 1530mm / 1560mm Total width: 1000mm Total length: 1000mm Materials: Interior: 1.4301 / AISI 304 Exterior: 1.4301 / AISI 304 Fittings: Outlet: DN50 DIN11851 Outlet valve: Disc valve Distance from drain to floor: 180mm Height of feet: 450mm Nameplate: No

Condition: used, Disc valve, flapper valve, ball valve, butterfly valve, gate valve, gate valve, diaphragm valve, diaphragm stop valve -Manufacturer: Sisto, gate valve diaphragm valve orig -Type: THM6-02 DN40 PN40 A105 H.64806 Itedpsiqy Tzsfx Aipjk -Number: 2x valve available -Price per piece -Dimension: 285/140/H200 mm -Weight: 6.4 kg/pc.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment list. Complete equipment available upon request. Chassis Regular ladder frame in lightweight steel construction with continuous crossmembers. Coupling plate, 8 mm thick, with a 2-point kingpin according to DIN 74080 / ISO 337. Suspension Axle lift mechanism on axle 1. Manufacturer of choice: Kögel - three-axle unit with disc brakes, Ø 430 mm, offset approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle tires Tires: 6x 385/65 R 22.5 UNIROYAL TH 50. Chassis components Kingpin supports (manufacturer of choice from Kögel), mechanically operated with leveling support, lifting capacity approx. 24 tons. One-sided operation on the right side when traveling. Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for a three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with spray flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with spray flaps behind the axles. Toolbox for storing: 10 side panels, folding stanchions, and rear door or rear flap. Fully enclosed, protected against spray, and also serves as a side protection device. Ground clearance (front): 220 mm. 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installation at the rear, 1x on the left and 1x on the right. High, rigid underrun protection at the rear made of steel according to ECE-R58. 1 pair of retractable warning signs for overwidth loads, retro-reflective red/white, with LED lighting, spiral cable, and plug connection. Arrangement in the front and rear areas of the vehicle. Itjdpozth E Eefx Aipok Brake/air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638 (without connection lines), parking brake as a spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection. WABCO EBS system. Air suspension system incl. 1 lifting and lowering valve, mounted on the left side behind the axle unit when traveling. Driving position is automatically adjusted. 2 tamper-proof coupling heads in the front ISO 1728 34410.010. Air reservoir for brake system and air supply made of steel (EN 286-2). Floor Plate floor approx. 30 mm thick. Floor sealed around the perimeter. Pocket for square tube inserts, approx. 80 x 80 mm, arrangement according to drawing J9: 8 pieces of pocket strips (18 pockets per strip: 4 pieces each on the outside + 10 pieces in the middle). Superstructure Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall Storage for max. 14 square tube inserts, approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. Front wall approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame. 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front panel according to EN 12640. Rear wall Foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tensioners and T-latch locks, 2 foldable steps on the inside. Foldable steel corner posts at the rear at the height of the side panels. Side wall 4 pairs of folding stanchions at the height of the side panels, 43540.380 VarioFix steel hol

Condition: used, machine/vehicle number: 19751, Valve air-water TR 618A screw-on 51MSW 15.7 mm straight Alligator 544.503 / RAL 7040 >38" window grey Complete wheel consisting of: 420/85 R 38 Ceat Farmax / R85 144 A8/144 B TL Disc wheel: 1 x 15 X 38/W GRA ET-10 S=15 m 1 x LK / 8/203.2/149.8/2 Iodpfxer Hni Ss Aipetk

Condition: ready for operation (used), A comprehensive spare parts package for the Arburg Allrounder 221 series is available. 1) Mechanics/Hydraulics/Plasticizing: 6x ejector piston rod, 3x pressure relief valves, clamping cylinder seal kit, 5x ejector seal kit, injection unit seal kit, cylinder D30, screw D30, 20x disc spring D31,5/16,3. 2) Heating/Temperature: 6x barrel heaters 1750W, 5x nozzle heater band 600W, Thermomat, 40x thermocouples. 3) Electrical/Sensors/Switches: 2x coding switch blocks, 6x contact sensors, 5x rocker switches, 2x snap-action switches, 9x switches, 8x microswitches, 2x limit switches, 10x ejector safety switches, 4x initiators, oil level switch, 6x contact pins with contact, 2x pulse counters. 4) Electronics/Control: printed circuit board ARB 279, 2x each membrane keypad ARB 179 and 180, printed circuit board shutdown automation 141, 2x printed circuit board ARB 550, printed circuit board ARB 554. Only package sale is possible. Documentation available. On-site inspection is possible. Itedoycig Djpfx Aipek

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Ijdpfjw Dy D Dex Aipstk Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: used, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable Itodpfjri Hihex Aipsk with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change

Condition: used, Year of construction: 2022, operating hours: 2,539 h, power: 118 kW (160.44 HP), color: orange, empty load weight: 10,500 kg, Operating hours: 2539, First registration: 03/06/2023. Basic equipment CityCat 500. Driver's cab: Comfortable cab, mounted on hydraulic bearings, with sound insulation. Windshield made of heat-insulating, curved, low-reflection safety glass. 2 sliding windows in each door. Multi-stage heating fan. Sun visor. Windshield wiper with washer system. Air-suspended driver's seat and sprung passenger seat, both individually adjustable. Adjustable steering column (angle and height). Clearly arranged and ergonomically positioned control and monitoring instruments with a 7'' color display. Visual and acoustic warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Steering: Hydrostatic four-wheel steering with hydraulic power assistance. Axles: Rear axle as a steering drive axle with differential. Front axle with coil springs and shock absorbers. Hydraulics: The latest electronic control concept enables optimized fuel and noise-efficient control of the diesel engine for hydrostatic drive over the entire speed range. This is achieved without any loss of performance. Brakes: Hydraulic dual-circuit brake system with hydraulic power assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on rear axle. 4 brake calipers in the front and 2 in the rear. Sweeper intake: Suction principle, with a drawn, stainless steel suction nozzle in front of the axle, together with side brushes that can be hydraulically shifted laterally by 400 mm. Infinitely adjustable high-performance suction fan. Sweeper container: Container volume 5.6 m³, hydraulically tilting and locking. Tilting height 930 mm. Tilting height (high tilting) 1550 mm (optional). Tilting width 1700 mm. Tilting angle 51°. Water system: Water tank approx. 880 l. One water pump for water nozzles. Sweeper brushes: 2 sweeper brushes, left and right, Ø 900 mm, infinitely adjustable speed 0-150 rpm, with start-up protection. Special equipment: - Color standard RAL 2011 orange. - Hydraulic suction nozzle flap. - Leaf grate. - Lifting device for raising and lowering the leaf grate in the sweeper body using a hydraulic hand pump. - Easyclean, quick cleaning system for cleaning the sweeper body side walls, fan, recovery system, and leaf grate. - 3rd front brush in reinforced design with linear displacement, tilt adjustment in both directions, load pressure regulation, greater reach, greater sweeping area. - Leaf suction hose, mounted on the side, length 3.5 m, ø 160 mm, can be mounted on either side. - Air conditioning, fully integrated, CFC-free. - Wide-angle mirror and main mirror, heated and electrically adjustable. - Additional side brush mirror on the right. - Rear view camera and suction nozzle camera. - Cruise control, improves work ergonomics, increases work performance. - Deluxe ISRI driver's seat with headrest and weight adjustment via control valve. - Rotating beacon in LED design on the cab. Mounted on the cab with an elastic bracket, can be folded down in case of obstacles. - Rotating beacon in LED design at the rear of the sweeper body. Mounted with an elastic bracket, can be folded down in case of obstacles. - Work lights, left and right brush, LED spotlight for suction nozzle, LED joystick exchange, front/side brush enables the exchange of the joysticks. - Water connection with spray nozzle. Isdpfx Aiei Haqhjpetk

Condition: used, power: 38 kW (51.67 HP), first registration: 12/2009, fuel type: diesel, gearing type: automatic, Equipment: air conditioning, Version 38 km/h, 2-speed gearshift for better driving performance 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4×4 drive 65 liter diesel tank Perm. total weight 3500 kg, therefore vol Air conditioning with heating and ventilation system 2 x front working lights Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-change plate Mech. Quick-Shift quick-change system for superstructures for summer and winter service Preparation of hydraulics and electrics for optional equipment variants High-pressure valves (360 bar) - only on BB201D Hydrostatic delay with brake light function (Pressostat) 4 x lashing eyes Quick-change suction mouth König Health seat with integrated 3-point seat belt Heated rear-view mirrors Integrated rear-view camera incl. 7" color screen - infrared night vision, viewing angle approx. 135° suction mouth camera (only in conjunction with reversing camera) Container with cleaning flaps & water level indicator Sweeping unit with 2 trailed front brushes, 900 mm Sweeping width: 1190 mm - 2400 mm Hydraulic coarse dirt flap Infinitely variable brush speed regulation 0-150 rpm Dust reduction through spray nozzles per disc brush Automatic collision protection (for sweeping and picking up) With hydraulic inclination adjustment of the right-hand brush Sweepings container with suction fan Color: Container in stainless steel look High-dump 1600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass extraction Multi-purpose separator screen for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change dirt container Baffle plate Iodpfx Aetzt E Heipotk

Condition: good (used), functionality: fully functional, empty load weight: 7,400 kg, maximum load weight: 34,600 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2014, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 3,000 mm, suspension: air, tire size: 445.45 r 19.5, color: blue, Year of construction: 2016, Equipment: ABS, sem centinati mega alla francese kogel, 2 identical units available, internal height 3.0m, 3 disc axles, ADR, air suspension with trim adjustment valve, lever-operated raise-lower truss on the columns and roof with sliding cover, rear doors, marine plywood floor, load code din xl, year 2016, inspected until 04/30/2025 - INTERDRIVE SRL DEALER - PARMA Isdpfx Asu Sadreipotk

Condition: used, Year of construction: 1995, Beer clarification plant with a self-discharging separator. The separated spent grain is temporarily stored in a 55 hl conical stainless-steel tank. Additional title: Disc centrifuge for the preliminary clarification of beer Capacity: 20000 l/h Volume sludge tank: 5500 l Material: stainless steel Itodpozizh Ssfx Aipok Position: standing on feet Features: Separator; sludge tank; pump; flow measurement; turbidity measurement; control cabinet with touch-screen display; special tools; various pipes, pipe panel and valves

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 -Hole circle: Ø 210 x 18 mm -Quantity: 5x valves available -Price per piece Iedpfspumagsx Aipjtk -Dimensions: 350/270/H250 mm -Weight: 17kg/piece

Condition: good (used), tem: D-7856-Samson-steam Valves Diverse steam valves made by Samson complete with control box! For more informations please contact us! Iedpfx Asirfb Esipotk DN 20/DN40/DN50/DN65/

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws Itjdpfx Ajycnf Soipsk :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Used stainless steel rolling container Article number: 10872 Last known use: unknown Volume: 515 liters Type: Standing on rollers Material (in contact with media): 1.4404 / AISI 316 Manhole: 440mm Design: Single-walled Operating pressure according to nameplate: ATM Container dimensions: Outer diameter: 1000mm Overall width: 1220mm Overall height: 1730mm Cylindrical height: 500mm Distance from outlet to bottom: 630mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4301 / AISI 304 Equipment: Nameplate: no Outlet diameter: 50mm Outlet valve: disc valve Iedpfey Uh Huox Aipotk Height of feet: 1090mm

Condition: new, Electrically Heated 545L Stainless Steel Agitated Tank Type: EBB500RWP Includes operating manual and CE declaration of conformity. The double jacket is filled with thermal oil, which is heated by an electric heating element. Alternatively available with other agitator types and in different sizes. Volume: 545L Dimensions approx.: Ø 950mm x cylindrical height 880mm Total height: 1120mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: Internal and external IIIc/2B Internal weld seams ground Max. operating temperature: 110°C Max. operating pressure: ATM - Vertical design on four legs with forklift tunnel - Top: Hinged lid, central crossbeam with two hinged lid halves - Bottom: Flat bottom with side outlet DN50 DIN11851 and disk valve - 2x side handles - 1x nameplate Itjdpfow Dy Ddjx Aipok Propeller agitator for low-viscosity media Power: 0.75KW Speed: 1410RPM Operating voltage: 3PH 400V