Used Diversen Schemelaufbau Mit Exte Rungen, Schemel for sale (7,967)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) Bdedpjykub Aofx Ahmjh ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), operating hours: 4,730 h, Well-maintained Jungheinrich 1.6 t electric forklift Type EFG 216k with charger Bdodjztvykopfx Ahmsh Year of manufacture 2014, 4730 operating hours Battery replaced in 2019 Front and rear windshield, cabin roof, LED work lights Offer subject to availability, without guarantee.

Condition: used, fuel type: electric, Price: On request Hawe Electric Tow Tractors – Always Multiple Units in Stock We offer a wide range of fully restored relay-controlled tow tractors as well as models with electronic drive control. All our tractors are thoroughly inspected and equipped with high-quality components. Our tractors come standard with: New batteries including new charger New relays New paintwork New seat Overhauled or brand-new 2000 Watt electric motor New tires and rims Bodpfxjzwgmvo Ahmsdh Interested? Feel free to contact us for more information or to schedule a viewing.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm Bdodpoz H N N Nefx Ahmeh - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Bdjdpeykuhcefx Ahmoh Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2025, condition: new, machine/vehicle number: H3000-H5000TM, Universal Testing Machine H3000TM-H5000TM according to DIN EN ISO 7500 The H3000TM-H5000TM series universal testing machine is a single-spindle machine with a robust design made of aluminum and V2a, featuring ball screws, ball bushing guides, and a toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and has a foil keyboard. A 2-line LCD display shows the force and displacement. The testing machine can be used as a standalone unit or connected to a PC via a USB interface. The displacement measurement is performed using an encoder with a visible resolution of 0.01 mm on the LCD (internally 0.0001 mm). The machine is manufactured with a standard load cell: 0.03% linearity and the corresponding calibration. Optionally, a second channel can be added for a second force transducer or a displacement sensor. The universal testing machine is manufactured with two different travel distances, 500 mm or 1200 mm (without load cell and testing tool). Further scope of supply: A load cell up to the nominal load, 220-volt cable, USB cable, description, CE declaration of conformity. Further information can be found in the attached description. Force transducer 3000N-5000N Measuring range: 5-5000N tensile and compressive, with nom. 2mV/V Output signal, overload protection: +/- 1000%, linearity: +/- 0.05%, hysteresis: +/- 0.03%, repeatability: +/- 0.02%, with, incl. 1.5m connection cable incl. calibration certificate. Long-travel extensometer HE 900mm measuring path, measuring arms motorized, including electronics. Accuracy class Class 1 from 1mm travel according to DIN EN ISO 9513 Measuring principle optically incremental Measuring path 900 mm, less the measuring length Display error 6 µm or 2 % Resolution 1 µm Actuation force 10 cN Standard initial device measuring length (Lo) 10-100 mm, in 5 mm steps Lo setting is done manually Measuring arms Opening and closing are motorized Specimen diameter 0-30 mm Specimen thickness 0-30 mm Specimen width 0-100 mm Weight approx. 32 kg Bdodpfx Ajiq Hxkehmsh Scope of supply Extensometer complete with electronics Cutting, round: 1 set of hard metal / rubber Wear parts Measuring blades optional rectangular blades CAUTION: When using optional blades, a readjustment of the Lo stop is required.

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: C15_202500011, functionality: fully functional, operating hours: 300 h, pressing force: 44 t, stroke length: 270 mm, operating speed: 100 mm/s, reverse speed: 100 mm/s, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, angle measuring system, documentation/manual, safety light barrier, Electric Press Brake C15 - IRIS+ Angle Measuring System CoastOne - Made in Finland Year of manufacture: 2025 - Project machine Press force: 44T Bending length: 1600mm Spindles: 2 x 22T Control: TC15-2D graphic Light barrier: Lazersafe IRIS+ angle measuring system Backgauge: 5-axis controlled X-R-Z1-Z2-Dx axes Tool holder: Manual type WILA / TRUMPF / Type B Light working area front and rear Front support table - height adjustable Dual foot pedal for opening and closing the Y-axis 1 set of press brake tools included 36-month warranty after installation Delivery extra; immediately available Viewing under power possible at any time by appointment! Bdedpfx Ahjz Eii Tsmjh

Condition: used, first registration: 07/2015, Year of construction: 2015, Tang EA 48 Ultralight Tautliner Curtainsider Trailer with Sliding Roof • Air Suspension • ABS • Tire Size: 215/75 R17.5 • Tire Condition: Average ~ 18 mm • Unladen Weight: 2,020 kg • Gross Vehicle Weight: 4,800 kg • Load Capacity: 2,780 kg Bjdpfowmn Rqox Ahmedh Body: • Length: 7.78 m • Width: 2.5 m • Height: 3.05 m • Volume: 59.33 m³ - German Trailer! - First Owner! - Very Good General Condition! - New MOT/SP upon request and for an additional charge! Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fanuc S-500iB robot, R-J3iB with 7th axis/motor Year of manufacture: 8/2006 Controller: R-J3iB Number of axes: 6 Max. payload: 15 kg Max. working range: approx. 2757 mm Profibus Included in delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – shows normal signs of wear. Further details, article numbers and pictures available upon request. Two weeks start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. Bdsdpfxjzmtg Uo Ahmsh The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city and postal code. Freight costs available upon request – please specify the delivery address.

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: No Model year: 2024 Bsdjzlqq Iepfx Ahmjdh Color: White Dimensions (L x W x H): 4500 x 2200 x 2300 cm Suitable for: vans Overall condition: very good Technical condition: very good Optical condition: very good

Condition: as good as new (ex-display), Year of construction: 2017, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 2,750 kg, warranty duration: 12 months, total height: 3,650 mm, type of input current: AC, total width: 2,190 mm, total length: 3,477 mm, overall weight: 8,000 kg, input voltage: 230 V, table load: 2,750 kg, Equipment: type plate available, Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please do not hesitate to contact us. Wenzel | LH122010 Coordinate Measuring Machine Coordinate measuring machine with the latest Renishaw 5-axis technology, manufactured in 2017. Bjdpez Hxxaofx Ahmodh Measuring range XYZ 1200 x 2000 x 1000 mm Dimensions: XYZ 2200 x 3350 x 3650 Maximum workpiece weight: 2500 kg Measuring uncertainty MPE (E0) 2.2 + (L/350) in µm Equipment • Renishaw UCC S5 controller, SPA3 servo amplifier, MCU5-2 joystick, I++ server • Temperature compensation with workpiece sensor • Active damping • Renishaw REVO 5-axis measuring system for single points and scanning, incl. RSP2, 1x RSH175, 2 x RSH250 and RSP3-3 kit (3xSH) incl. all probe changers • Mode measuring software, current version with CAD import STEP, incl. 1 year of software maintenance • PC system Windows 11 with 2 x 27 TFT monitors NEW, incl. height-adjustable desk • Control cabinet with state-of-the-art safety technology Original price in 2017 plus VAT: €234,890.00 Optional service package of your choice: Price: €19,880.00 Transport free to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: used, maximum load weight: 32,880 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, Equipment: ABS, Schmitz Cargobull SPL 24/L-13.62EB Platform Trailer * Platform semi-trailer * Front wall, 1,200 mm * 12 container locking devices / twist locks: 1 x 40 ft, 2 x 20 ft and 1 x 20 ft * Continuous lashing points in the outer frame * 4 extendable warning signs with position lights * Longitudinal beam height at the front: 156 mm, at the rear: 428+28 mm, Smart Generation * Premium distributor with 3 sockets: 2x7-pole DIN ISO3731+DIN ISO1185+ ISO12098 * 8 pcs. additional lashing beam pockets in the center of the 8 t floor, for lashing beam 70/70 * 8 pairs of additional lashing beam pockets with lashing beam securing in the outer frame for lashing beam 70/70 * Strength per additional lashing beam: up to 400 kg at a height of 1 meter * 1 row of lashing beam pockets 70x70 across the load securing, approx. 2600 mm in front of the front wall * Open storage box on top for additional lashing beams * Lashing points: 16 pairs, 4 tons tensile force per eye, according to EN 12640 * 28 mm plate floor, max. 8000 kg forklift axle load, strength test according to DIN EN 283 * Air suspension * Air control system * Lift axle * Disc brakes Subject to prior sale and errors! Sale exclusively subject to our general terms and conditions. Bsdpot Dhfmjfx Ahmodh Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal information: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and thus does not constitute guaranteed characteristics.

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm Bedpsz Hb Nnsfx Ahmodh The excavator must be picked up on site.

Condition: used, mileage: 164,056 km, power: 96 kW (130.52 HP), first registration: 06/2010, fuel type: diesel, empty load weight: 3,220 kg, maximum load weight: 2,280 kg, overall weight: 5,500 kg, axle configuration: 4x2, wheelbase: 2,500 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space volume: 3 m³, Equipment: air conditioning, cabin, * German vehicle * 1st owner * Previously owned by a municipal authority * Condition as shown in the photos * Refuse compactor body by premium manufacturer Hagemann & Partner * Model: HG 3.5 L * Side sliding doors for loading * Nominal volume: 3.5 m³ * Driver’s cab with 3 seats * Air conditioning * Electric windows * Rotating beacon * 6-speed manual transmission * Radio CD * Wheelbase: 2.50 m * Gross vehicle weight (GVW): 5,500 kg * Unladen weight: 2,220 kg * Payload: 2,280 kg If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Bdedpfxox Urrzo Ahmsh Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV certificate, WITHOUT new safety inspection (SP), WITHOUT new accident prevention regulation inspection (UVV). You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend viewing and inspecting the goods, to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided is without guarantee. We do not accept liability for errors or incorrect specifications in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: good (used), Year of construction: 2003, IPE Compact Filter BG Jet 300 Year of manufacture: 2003 Filter area: 24.7 m3 Category: BIA-KAT Airflow rate: 4000 m3/h Negative pressure: 2110 Pa Extraction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar Connected load: 5 kW Nominal speed: 4 kW Length: 2000 mm Width: 1000 mm Height: 3420 mm Weight: 725 kg (extraction) New filters Press: Genius 1 Hydraulic operating pressure: 190 bar Year of manufacture: 04/2003 Power: 7 kW Location: available from stock 54634 Bitburg - immediately available - Subject to prior sale Bdsdpfjy Dc R Tox Ahmoh Sold as seen, without warranty without guarantee

Condition: used, length 1500 mm width 700 mm Bjdpfx Aoz Icxgohmsdh height over floor 850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 11,500 h, machine/vehicle number: 3098, laser hours: 6,900 h, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, power: 10 kW (13.60 HP), year of last overhaul: 2024, working range: 4,020 mm, Equipment: cooling unit, documentation/manual, safety light barrier, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic exchange table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filter system with 7.5 kW Technical data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Bodpfx Ahsvw Tdlomjdh Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Positioning speed of the Z-axis: 18 m/min Travel range of the Z-axis: 150 mm Acceleration of the Z-axis: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling from/to: Ø 4 mm - Ø 30 mm Threading from/to: M5 - M20 max. material thickness: up to 25 mm* Power: 21 kW Revolutions: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic measurement of drilling tools Pneumatic clamping device Brush for removing drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan power: 7.5 kW Volume flow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine was always operated with a maintenance and support contract.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. Bdsdpfx Ahoykugxemsh - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: used, CW10 – 40 cm = Further information = Bdsdpezhcb Rjfx Ahmjh Suitable for use in: Construction machinery Please contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels, along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, Garage box / loading container / case / insulated case / cooler Closed container / closed case Bedpfx Aszqdayohmedh Without cooling unit Loading space: Length: 8.0 meters Width: 2.46 meters Height: 2.05 meters Can serve perfectly as a garden shed / garage. Some photos to illustrate how it can look after your own customizations. Sold as shown in photos 5 - 7 Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2008, loading space length: 13,250 mm, loading space width: 2,550 mm, loading space height: 3,200 mm, loading space volume: 50 m³, total length: 13,250 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65-R22.5, color: white, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = Fluid swap body chassis, year of manufacture 2008, with GOFA tank superstructure, year of manufacture 1991, single-compartment 50,000-liter tank semi-trailer for butane/propane/gas, ADR (FL, AT), tank inspection valid until 04/2026; leak test valid until 05/2029. ABS/EBS, SAF axles with disc brakes (Intradisc), 1st axle = lift axle, Alcoa wheels, 28 bar test pressure, tires 385/65-R22.5 (L: 10/14/7 mm; R: 12/11/16 mm), unladen weight: 12,000 kg, gross vehicle weight: 35,000 kg, German registration. = Further Information = Bdjdpsxv Dmksfx Ahmoh Axle Configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; tire tread left: 65%; tire tread right: 75% Rear axle 2: Alloy wheels; max. axle load: 9,000 kg; tire tread left: 95%; tire tread right: 70% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; tire tread left: 45%; tire tread right: 95% Weights Unladen weight: 12,000 kg Payload: 23,000 kg gross vehicle weight: 35,000 kg Functional Body manufacturer: GOFA Gocher Fahrzeugbau GmbH GAZTANK 50,100L Number of compartments: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for further information.

Condition: used, Machine: Tank Rührgerät mit Propeller ca 1,00 Mtr , Farbe grün Bedpfez Ial Dox Ahmjdh

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Bsdpfx Ahoz Ibgpjmjdh

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 Bdedpjz E Rb Dofx Ahmeh - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2008, loading space length: 13,250 mm, loading space width: 2,550 mm, loading space height: 3,200 mm, loading space volume: 50 m³, total length: 13,250 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 385/65-R22.5, color: white, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = Bsdpfx Ahjxwamiemodh - ADR - EBS - Lift axle - Aluminum rims - Air suspension - Disc brakes = Notes = Fluid exchange chassis, year of manufacture 2008, with GOFA tank body, year of manufacture 1991, 1-chamber 50,000-liter tank semi-trailer for butane/propane/gas, ADR (FL, AT), tank inspection valid until 06/2027; leak test valid until 06/2030, ABS/EBS, SAF axles with disc brakes (Intradisc), 1st axle = lift axle, Alcoa rims, 28 bar test pressure, tires 385/65-R22.5 (L: 10/10/7mm; R: 13/15/8mm), unladen weight: 12,000 kg, permissible total weight: 35,000 kg, German registration. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 65%; Tire tread depth right: 80% Rear axle 2: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 65%; Tire tread depth right: 95% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 45%; Tire tread depth right: 50% Weights Unladen weight: 12,000 kg Payload: 23,000 kg GVWR: 35,000 kg Functional Body brand: GOFA Gocher Fahrzeugbau GmbH GAZTANK 50.100L Number of chambers: 1 Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for further information.