Used Dumeta D-Hb-3 for sale (87,217)

Condition: used, mileage: 24,749 km, power: 382 kW (519.37 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Roll tarpaulin, trailer tipping hydraulics, air-suspended driver's comfort seat with lumbar support, adjustable shoulder section, and heating, construction site package, EBS, full brake assist, roll-away protection, MAN TipMatic Manoeuvre - shunting mode, LED lighting, ASR (traction control), emergency brake assist, lane departure warning system, Ringfeder type RF50 A trailer coupling, MAN Media System Advanced 7'' (without navigation card), RIO BOX, smartphone integration, tipping platform 4,900 mm x 2,380 mm Meiller type D316, recessed lashing eyes in floor plate, sideboard height 900 mm, front wall height 1,100 mm, 350 mm deflector plate on front wall, access steps on front wall, fixed corner stanchions, tailgate height 900 mm, tailgate swinging, 150 mm discharge chute on tipping platform, axial pump for tipping hydraulics Meiller type 275/1, gearbox-dependent PTO, Meiller roll tarpaulin. Dcodpeuciyzsfx Agmsk

Condition: used, mileage: 31,615 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), Trailer tipping hydraulics, driver's comfort seat with air suspension and lumbar support, shoulder adjustment and heating, construction site package, EBS, full brake assist, immobilizer, MAN TipMatic Manoeuvre - maneuvering mode, LED lighting, ASR, emergency brake assist, lane departure warning, trailer coupling Ringfeder type RF50 A, MAN Mediasystem Advanced 7'', without navigation map, RIO BOX, smartphone integration, tipping body 4,900mm x 2,380mm Meiller type D316, lashing eyes retractable in the floor plate, side wall height 900mm, front wall height 1,100mm, 350mm guide plate on front wall, steps on front wall, fixed corner stanchions, rear wall height 900mm, swinging rear wall, 150mm discharge chute on tipping body, axial pump tipping hydraulics Meiller type 275/1 PTO gearbox-dependent, Dosing device for rear wall tipping bridge, hydraulic connection at the rear Dedsucizlspfx Agmsck

Condition: used, Year of construction: 2008, operating hours: 10,526 h, 2008 | Hitachi ZX350LC-3 with standard earth boom and long-front boom | Used Demolition Excavator | 10526 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 66000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Dodey Azpxepfx Agmsck 👷‍♂️ Inspected by an independent expert 63 inspection points 50 approved ✅ 13 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Some small repairs to be anticipated, maintenance followed with complete history: handlers, numerous hoses, seals, belts... An excavation boom and a long demolition arm approximately 14 m in length. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40542 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2018, condition: like new (used), Dumeta hydraulic welding positioner, height-adjustable 500 kg load capacity, height-adjustable welding positioner with through-hole, 100–200 mm Table diameter 700 mm Horizontal height min. 0.6 m, max. 1.2 m Tilted height min. 0.40 m, max. 1.0 m Speed 0.11–1.25 RPM Weight 750 kg Tilt up to 135° Hand and foot remote control with speed display Dcodpfx Agjhua Dqsmek Very robust

Condition: used, maximum load weight: 23,065 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 08/2008, next inspection (TÜV): 02/2026, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,400 mm, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to availability until final sale, errors, typos, and prior sale: Schmitz City Refrigerated Trailer (Vehicle 230) First registered: 08/30/2008 Type: SKO 20/LZG-13.4 FP 80/45 Permissible gross vehicle weight: 32,000 kg Unladen weight: 8,935 kg Payload: 23,065 kg Overall length: 13,550 mm Overall width: 2,600 mm Overall height: 4,000 mm Internal length: 13,400 mm Internal width: 2,500 mm Internal height: 2,400 mm Type: Ferroplast 2 x lashing rails, one above the other, in each wall Tail lift: BÄR, 3,000 kg capacity, at the rear Refrigeration unit: Carrier Maxima 1300 5,279 operating hours Diesel Refrigeration unit 2 x 12-ton, 2-speed gear-driven winches Spare wheel holder Air suspension with new air springs in 2025 Air suspension with raising and lowering function Various minor damage from operation 2 x LED work lights, rear, on the sides + 2 x LED reversing lights Dcjdpeyygbbsfx Agmsk Tires: 425/65R22.5, front approximately 40%, rear approximately 60/40% MOT (TÜV) valid until 02/, steerable axle Storage box, plastic Water tank Price: €3,250.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Year of construction: 2023, Jungheinrich Charging Station for Industrial Trucks Industrial Charging Station, Maintenance Stand for Battery Maintenance If you utilize electric industrial trucks within your facility, they rely on rechargeable batteries or battery packs as their power source. By installing a dedicated battery charging station, you benefit from a compact solution that significantly simplifies the battery charging process. This system serves as a charging station for industrial trucks (such as forklifts). It features three charging bays equipped with Tecna spring balancers that hold the charging cables in position. Construction: The yellow steel structure consists of a metal frame with integrated floor-level impact protection designed to shield the unit from damage caused by vehicles. Spring balancers are mounted at the top to facilitate the ergonomic handling of heavy charging cables. Dcsdpfx Ajy Nxulsgmek Jungheinrich Battery Charging Station – Floor-Mountable Length: 4.15 m Width: 0.70 m Height: 2.30 m Year of Manufacture: 2023 Chargers not included "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Dodpfx Agsxu Ddgomeck Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = - ADR - Air suspension - Disc brakes - EBS - Lift axle

Condition: new, table diameter 690 mm table load 0,5/0,25 t swivelling range 0 - 90 motorisch Grad turning speeds 0,2 - 2,5 U/min spindle bore 100 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt weight 290 kg Dimensions (LxWxH) 800 x 750 x 750 mm Welding turntable with Dsdpfxsfv Ayko Agmsck - Footswitch - tilt motor - Speed continuously adjustable - 500 amps welding current transmission

Condition: new, weight max. 1000 kg workpiece diameter 20-800 mm connected load frequency 230 V speed 100 - 1000 mm/min total power requirement 0,1 kW Dcsdpefv A Afjfx Agmek weight of the machine ca. 65 kg dimensions of the machine ca. 520x470x390 mm

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: Djdpfxjq Ev R Se Agmjck - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg

Condition: new, weight max. 5000 kg workpiece diameter 250 - 2500 mm total power requirement 0,75 kW table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm weight of the machine ca. 800 kg range L-W-H 2200 x 2500 x 800 mm Dcjdpfx Agen N D Iwsmsk - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Dcodpogvkk Nefx Agmok Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Dcjdoh Evt Uspfx Agmjk The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, thread dia. M5 - M16 mm 250 U/min. 48 Nm air pressure 6 - 8 bar working area 150 - 1900 mm The pneumatically driven D-JSC tapping machine has, among other things, one Air motor with quick chuck and a stable and flexible Labor arm. The mounting arm can be attached directly to the work table using the mounting flange and is ready to work immediately. This means fast changeover times guaranteed. It is possible to simply tap the tap to the desired hole to be attached without having to position the component under the tap. Version with an adjustable angle, whereby the quick chuck can tilt so that horizontal tapping is also possible. Pneumatic tapping machines for M5 - M16 threads, angle adjustable. 6 pcs. Quick change chucks with slip clutch. Optional: - Clamping table with T-slots: 750x600x650mm or 990x700x800mm. Dedpsfg U Siofx Agmjck - magnetic base.

Condition: new, thread dia. M3 - M8 mm Dodpfxofg U Sns Agmeck

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Dcedpfx Aefg U Sqegmek Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: new, thread dia. M3 - M12 mm 400 U/min. 28 Nm air pressure 6 - 8 bar working area 150 - 1900 mm weight of the machine ca. 12 kg Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable. 6 pcs. Keyless chuck with clutch. optional: Working table with T-slots: 750x600x650mm 990x700x800mm or. Magnetic base. Djdpjd Iinuofx Agmeck Available up to max. M16, M22 and M33.

Condition: new, thread dia. 12 mm 375 U/min. Dodefg U Spjpfx Agmock working area 180 - 1000 mm engine output 0,7 kW

Condition: new, thread dia. M6 - M22 mm 60/200 U/min. 105 Nm air pressure 6 - 8 bar working area 400 - 2000 mm Dcsdpfxefg U Skj Agmsk

Condition: new, thread dia. M3 - M16 mm Dedpfx Aed Iinmsgmsck max. 187 U/min. working area 180 - 1000 mm engine output 0,7 kW weight 22 kg

Condition: new, thread dia. 12 mm Dcedped Iinnjfx Agmsk 375 U/min. working area 180 - 2000 mm engine output 0,7 kW weight 28 kg

Condition: new, table diameter 2500 mm table load 20,0 t swivelling range 0 - 135 Grad turning speeds 0,04 - 0,4 U/min max. torque on the faceplate 40000 Nm table pass 200 mm welding current 1000 Ampere total power requirement 5,5 + 11,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. Dcsdpfefv Axmox Agmjk • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, Table dimensions 800 x 800 mm table load 1500 Kg swivelling range 0 - 105 Grad turning speeds 0,15 - 1 U/min height adjustment 672 - 1180 mm hollow spindle diameter mm welding current 500 Ampere max. torque on the faceplate 3000 Nm total power requirement 0,75 kW dimensions of the machine ca. 1560x1120x750 m Characteristics: • Made in EU Dcedpsfv Azpsfx Agmok • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection)

Condition: new, table diameter 350 mm table load 100 / 50 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 5,0 U/min spindle bore 30 mm Torque 150 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 100kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal Dedpfx Asg Rk Dljgmock

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad Dsdpofv Axfjfx Agmeck turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.