Used Ebert Centerless Grinder for sale (2,206)

Condition: ready for operation (used), Year of construction: 1978, operating hours: 300 h, functionality: fully functional, machine/vehicle number: UWII/2567/78, Tool grinding machine Motorized height adjustment has been repaired Nwodov Hcblspfx Ai Tsn Spare parts supply secured by repair shop >Grinding table 835 x 145 mm< Longitudinal travel by hand 500 mm Pivotability 90 degrees >Grinding head< Transverse movement 220 mm Height adjustment 250 mm Pivotability horizontally and vertically - 360 degrees Extension of the working range via eccentric plate Grinding spindle D60x240 mm Speeds - 2 belt speeds 3300/5400 rpm Weight approx. 700 kg Space requirement 1800 x 1300 x 1600 mm The machine is functional; all movements can be controlled by handwheel.

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: Njdpfx Aioyfvwbs Tswn NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, total width: 1,450 mm, total length: 6,550 mm, total height: 1,300 mm, Colour: Green Empty weight: 3.000 kg - Drive system: Conventional - Number of axes [pcs]: 2 - X-axis travel [mm]: 3250 - Y-axis travel [mm]: 300 - Table width [mm]: 3750 - Table depth [mm]: 400 - Max. grinding wheel diameter [mm]: 355 - Options: External cooling, Knife Sharpener - Transport dimensions: 6550mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Njdpfx Aij Adza Us Town Lukas van Rossum

Condition: used, Year of construction: 2015, grinding diameter - cylindrical/face 203 mm regulating wheel width 247 - 330 mm max. width of grinding wheel 380 - 508 mm control SIMATIC HMI TP700/KP400 weight of the machine ca. 8,10 t dimensions of the machine ca. 6,00 x 4,10 x 2,50 m Retrofit in 2015 (Huttelmaier), new in 1964 Nods Aaq Rzopfx Ai Town Dressers for grinding and regulating wheels MPM BM50 automatic balancing system Motorized feed axis Incremental steps: 0.001/ 0.005/ 0.010/ 0.100 mm Infeed conveyor with two-hand operation Frasch FP66N-zw belt conveyor Semotec system for finished parts POLO Filtertechnik unit Extraction system (switchable via auxiliary equipment) Nold Hydraulik und Pneumatik hydraulic power unit Central lubrication system with fill-level indicator Infeed handling system for plunge-grinding operations

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical specifications for the EBERT TLS 43 ST special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Payload: approx. 32,200 kg, Low-bed length: 9,350 mm, Axle center distance: 2,700 mm, Overall width: 2,550 mm, Loading height/low-bed: approx. 200 mm, 350 mm, Overwidth signage at the front and rear with red/white signs Wheels: 245 / 70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Nsdpfx Aeyfp Aqei Town Electrical system: NATO connector used, power supplied by the towing vehicle, rotating beacon at the rear center, side marker lights in LED design, standard rear light for vertical mounting (LC5) Hydraulics: Hydraulic system on the upper deck for steering Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Errors and prior sale are subject to change! Rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2002, LANDIS 3SE 14"x 60"ANGLEHEAD CNC GRINDER REBUILT BY LANDIS & TOOLED 2002 Equipped with: NEW FANUC CONTROL 2007 2-Axis Template Truform Servo Step Profile 30 Degree 30" Wheel Dead Headstock Table Traverse Marposs E39 Marposs Table Gauge Lateral Locator 3-Gauge TIR Gauge Steady Rests Wheel Balance Servo Motor-Traverse Stepping Motor Mist Collector Nsdjrtr Eajpfx Ai Town Specifications: Swing: 14" Center Distance: 60" Motor: 1200 rpm Motor Pulley Diameter: 7.031" Spindle Pulley Diameter: 6.5" New Wheel Diameter: 30" Worn Wheel Diameter: 22" Max. Wheel: 8500 sfpm Max. Workhead: 333rpm X-Axis Ball Screw Pitch: 5mm per rev. X-Axis Total Stroke: 14.74" X-Axis Motor Pully Wheel Feed Diameter: 3" X-Axis Ball Screw Pulley Diameter: 3" Z-Axis Ball Screw Pitch: 10mm per rev. Z-Axis Total Stroke: 72.88" Z-Axis Motor Pulley Diameter: 3" Z-Axis Ball Screw Pulley Diameter: 6" Total Stroke: +/-2mm Total Marposs Voltage Output: =/-10vdc Dresser One Revolution of the Stepping Motor: .045" Diamond One Revolution of the Stepping Motor: .005" Weight: 25,000 lbs.

Condition: good (used), Year of construction: 1985, For sale is a used Langzauner LZK 3/2 wide belt grinding machine with a grinding belt length of 6200 mm. The machine is in good condition and has been inspected by our qualified technicians. Technical data: - Table size 2500 x 800 mm - Height adjustable - Grinding belt length 6800 mm Nwsdpfx Aiez Anwme Tjn - Dust extraction connection Ø 150 mm - Motor power 3 kW / 4.1 hp - Year of manufacture 1985 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, wide belt, wide belt sander Reference: R-N0131

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 12-09, Used tool grinding machine Manufacturer: SCHÜTTE Type: WU 405 Year of manufacture: 1998 Machine No.: 12/09 Nweds Aay Dqjpfx Ai Ton

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Nedpfoyfu N Asx Ai Tswn Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Nwsdpsh S Upijfx Ai Tsn Table Model: 800 Description: 800 grinders with a slat knife

Condition: like new (used), functionality: fully functional, machine/vehicle number: 46J0264, Plastic Grinder / Granulator, Brand: AEC, Model: GP1018, Serial Number: 46J0264, Year: 2016, 460 V, equipped with a 10 HP OIN WEI ELECTRIC motor. ESPAÑOL: Molino Triturador / Granulador para Plástico marca AEC, modelo GP1018, No. de serie 46J0264, Año 2016, 460 V, equipado con motor de 10 HP, OIN WEI ELECTRIC. Nwjdpfjz Svvnsx Ai Tjn

Condition: excellent (used), CATALOGUE NUMBER 8128 Technical specifications: - Length of workpiece: 2600 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 170 mm - Fan - 2 speed settings + clockwise/counterclockwise rotation - Diameter of dust extraction port: 120 mm - Overall dimensions (L/W/H): 3650x1330x1500 mm - Weight: approximately 800 kg ADVANTAGES – Polish production – With fan – DTR documentation included – Unpainted – Used sander, very good condition Nodpfx Aie Aac Eqe Tjwn Net price: 6200 PLN Net price: 1442 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, axle configuration: 2 axles, Equipment: ABS, Multiple units available, ABS, 10-ton axles Top German brand, 275/70R22.5 tires, air suspension, centrally closed frame with checker plate, mudguards, side underrun protection, 2 x EXTE D5 bolsters (optionally also without bolsters or with 4 EXTE bolsters or 6 EXTE bolsters), 4 x EXTE C5 stanchions, unladen weight with 2 bolsters approx. 3,400 kg. Vehicle price without bolsters: €26,990 net Vehicle price with 2 EXTE bolsters: €30,690 net Vehicle price with 4 EXTE bolsters: €34,390 net Vehicle price with 6 EXTE bolsters: €38,090 net Leasing or financing offers available on request. Mr. Ebert (Tel. ...) is happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale! Nwsdpfx Asygch Asi Tjn = Further information = Usable material: Wood Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for further information.

Condition: used, Grinder Wolfking Nede Adyqrepfx Ai Tswn -Type: C.160-1T-72 -Throat diameter: Ø - 160 mm -Reverse gear -With loading for 200L meat bins -With control cabinet -External dimensions: 2000 x 1550 x 2650 mm -Cabinet dimensions: 700 x 600 x 270 mm -Power supply: 400V 50Hz 3N -Made of stainless steel -Condition: used in very good condition, overhauled, ready to work

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 250660, overall weight: 4,500 kg, grinding spindle motor power: 28 W, year of last overhaul: 2026, Our machine has been meticulously maintained and has undergone regular servicing. The spindle was recently replaced, and it now operates flawlessly. Nsdpfx Aiez Nad As Tswn

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, We are offering this used Johannsen wide belt sanding machine + additional sanding belt + dust collection container for sale. The machine nameplate is from the dust collection system, not from the sanding machine. Njdpfx Aijzzlvwo Tswn Manufacturer: Johannsen Model: Wide belt sanding machine Year of manufacture: 1996 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, Available in Q1/2027, equipment can still be adapted to meet specific needs. Universal 5-axis retrofitting grinding machine directly from the manufacturer. Equipped with the latest Horizon grinding software, tailored to the requirements of the tools and components. For re-sharpening hammer jaws, helical milling cutters, bevel gear cutters, cutting rotors, form cutters, industrial knives, circular knives, spur gears, skiving tools, deep-hole drills, and other workpieces/components. Working area: X-axis: 630 mm Y-axis: 345 mm Z-axis: 430 mm C-axis: Rotation angle 300° X3 auxiliary axis: Working area: 400 mm Grinding spindle: Interface: HSK80 (conversion to HSK50 possible) Power: 100% 28.8 kW Speed: Standard 12,000 rpm Measuring system and feed: Resolution of linear axes: 0.0001 mm Nwedpfxoyzqwcj Ai Ten Rapid traverse of linear axes: 30,000 mm/min Resolution of rotary axes: 0.001° Speed of C-axis: 150 rpm Rotary axis: (A-axis SK50) Center height: Standard 175 mm Speed as spindle: 1,000 rpm Optional: 2,600 rpm Control system: Siemens 840D SolutionLine Tool changer: Single-wheel, 6-8 positions Coolant system: Turbo Separator Extraction system: LTA Fire extinguishing system: Kraft & Bauer Dressing unit Tailstock: optional Further accessories/clamping devices available from the extensive A. Haas clamping device catalog. Individual, customer-specific training programs. Includes pre-acceptance at the manufacturer's plant, IBN (installation, briefing, and training), and final acceptance at the customer's site. Financing options available upon request.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 642, We are selling a polishing machine for polishing and rounding the cutting edges of precision cutting tools. It is primarily designed for carbide tools, including various types of drills and milling cutters. The machine allows for easy replacement of the container for coarse or fine polishing. Nedez Eib Njpfx Ai Town The machine is in regular use, easy to operate, and consistently performs flawlessly.

Condition: used, Year of construction: 1993, functionality: fully functional, total height: 2,200 mm, total width: 2,500 mm, total length: 2,800 mm, type of input current: AC, overall weight: 4,500 kg, input voltage: 380 V, nominal power: 38 kW (51.67 HP), NOMOCO VSRS-280 CNC 4 – Centerless CNC cylindrical grinding machine We are offering a NOMOCO VSRS-280 CNC 4 centerless cylindrical grinding machine, manufactured in 1993, in very good condition and fully functional, for sale. The machine is currently in operation and can be inspected on-site after prior appointment. This provides the opportunity to directly verify the machine's function and current technical condition. The Siemens CNC control system, as well as the CNC-controlled X, Y, Z, and C axes, enable precise and reproducible machining. The machine is particularly suitable for industrial applications where a reliable and economical solution for centerless cylindrical grinding is required. Technical Highlights Manufacturer: NOMOCO Model: VSRS-280 CNC 4 Year of manufacture: 1993 Machine type: CNC cylindrical grinding machine, centerless Control system: Siemens CNC-controlled axes: X / Y / Z / C Condition: Used, very well-maintained overall condition Availability: Immediately Inspection: Possible by appointment Machine currently in operation Axis configuration Axis Function X-axis Infeed slide Y-axis Truing spindle S Z-axis Truing slide S C-axis Support U-axis Support R W-axis Truing slide R Dimensions & Weight Overall length: approx. 2,800 mm Overall width: approx. 2,500 mm Overall height: approx. 2,200 mm Weight: approx. 4,500 kg Electrical connection data Operating voltage: 380 VAC / 50 Hz Rated current: 100 A Connected power: 38 kW Condition & Inspection The NOMOCO VSRS-280 CNC 4 is currently in operation. The overall condition is considered to be very good for its year of manufacture. An on-site inspection and functional test are possible after prior appointment. Availability: immediately Njdpfx Asyr Sh Asi Tewn If you are interested, have technical questions, or would like further information, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, engine power: 2.2 kW table length: 290 cm table width: 80 cm electric table adjustment belt width: 150 mm power supply: 380 V Nsdpszdyhmjfx Ai Tswn

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, NC Universal 5-Axis Tool-and Cutter Grinder Walter Helitronic Power Technical details: CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Nwodpfe Aawiqsx Ai Tsn Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Storage location: Supplier Nedj Afzzbepfx Ai Tswn

Condition: new, axle configuration: 3 axles, total width: 27,500 mm, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, fully flat bed, self-supporting design. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in a standard version), fully air-suspended, last axle with trailing steering, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! = Further information = Nwodpfx Aeyfu Urei Ton Please contact Tobias Ebert for more information.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Anca control system. Nwsdoz Ry Tuspfx Ai Tjn

Year of construction: 2013, condition: used, functionality: fully functional, This machine is used for sharpening straight blades used in Eillert, Fam, and other slicing machines. The machine is in good working order and ready for use. Nedpjz H Atuefx Ai Tewn Type: SKGM Year of manufacture: 2013 Please check out my other listings.