Used Ebu Hk 100 Fr for sale (27,732)

Condition: used, Gear motor, electric motor, electric gear motor, worm gear motor -Manufacturer: RTZ Witte, worm gear motor -Gearbox: RTZ Antriebstechnik/ Varvel Type FRT 85/B3 1/100 IEC80B14 i= 100 -Speed: approx. 14.3 rpm -Engine: WitteType WW 80-4 Ncedot E D Erjpfx Ac Tsu -Power: 0.55 kW / 1430 rpm -Protection class: IP55 -Shaft: Ø 32 x 70 mm -Dimensions: 485/210/H320mm -Weight: 22 kg

Condition: used, Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140mm - Bundle loader: 6,000mm - 12,300mm x 5Tn - Unloading: Up to 5,000mm - Optional: Automatic robotic packing system BUNDLE SPECIFICATIONS: Weight at loader: 5000 Kg Diameter max.: 600 mm Min. – max. tube length at entry: 6000 – 12300 mm Max. bending of the tubes at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Rounds : 40 – 140 mm - Squares : 40x40 – 135x135 mm - Rectangles : 50x25 – 200x80 mm Max. tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at exit: 5000 mm DEBURRING Deburring unit Dimensions: - Rounds diameter: 20 – 102 mm - Squares: 30x30 – 70x70 mm - Rectangles: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITRE CUTTING With manual loading, it is also possible to make MITRE CUTTING Cutting Capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Squares: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangles: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm Nsdpfx Ajvt Tzcoc Tocu SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length 2. Cutting unit Mod. LYBRA C450 with: - Micro-lubrication - Air blowing - Chips conveyor - Tilting carriage - Unloading clamp 3. Deburring unit Mod. SDB100 5000 4. Exit collecting cradle with endless slings 5. Complete electrics & hydraulics 6. Existing documentation * 7. Existing spares * *To be checked before order OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6.000 mm - 12.300 mm x 5 Tn Unloading: Up to 5.000 mm Optional: Automatic robotic packing system Bundle weight at loader: 5000 Kg Bundle diameter max.: 600 mm Tube length at entry: 6.000 – 12.300 mm Bending of the tubes at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, rounds: 40 – 140 mm CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Max. 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at exit: Max. 5.000 mm DEBURRING Rounds diameter: 20 – 102 mm DEBURRING Squares dimensions: 30x30 – 70x70 mm DEBURRING Rectangles dimensions: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz

Condition: new, Year of construction: 2025, Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from Ø 0.6mm, SUS from Ø 1.8mm; tunnel size: Ø 100mm; power: 220V/0.05kW, 50Hz/60Hz; dimensions and weight: L50xW50xH40mm, 45/145kg. Ncedpsv Nm Eyofx Ac Tju Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, drilling on table: 120die cushion returning speed: 52die cushion stroke: 200die cushion press capacity: 30motor power: 11retracting speed: 165working speed: 8,5rapid traverse: 100daylight: 750pressure: 100tappet measurements: 900 x 600table diamension: 1100 x 700messurements (LxWxH): 2.180 x 1.600 x 3.350weight approx.: 9300total power requirements: 11stroke: 500 Njdsd Ab Imspfx Ac Tecu

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 74100 € Ncjdpfx Acewiqy Ts Tou 1400.49 € 100 to 300 mm 600 x 900 mm 700x1100 mm 550 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm 2050 mm 3050 mm 6500 kg 4-pillar guide table and ram with T-slots manual stroke adjustment via cam switch manual and automatic operation front light barriers according to CE rules

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 91200 € 1723.68 € 100 to 500 mm 600 x 900 mm 700 x 1100 mm 750 mm 320 mm 100 mm/s 8,5 mm/s 165 mm/s 11 kW 2100 mm Ncedpfxswir Dge Ac Tju 1900 mm 3350 mm 7300 kg 240 bar 30 to 200 mm 120 mm 170 bar 52 mm/sec. 700 x 400 mm 2-hand control Control over SPS Adjustable die cushion stroke Lubricant-free ram guide light barriers User Manual in German according to CE rules

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW Ncjdjw Uab Njpfx Ac Teu • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), Professional milling head with SK40 mount designed for facing and roughing steel and cast iron. Model: AHSC 100-05-11. Working diameter: Ø100 mm. Maximum speed: 22,500 rpm. Number of insert seats: 4. Mount: SK40. Condition: used, fully functional – visible signs of use. Ideal for CNC machining centers and conventional milling machines, ensuring high performance and stability even at high cutting speeds. Ncsdpfoxk T Rnjx Ac Teu

Condition: used, functionality: fully functional, load capacity per storage section: 10,000 kg, total width: 1,100 mm, load per truss pair (max.): 2,100 kg, frame height: 12,000 mm, clear span: 2,700 mm, product height (max.): 2 mm, Large Lot of Nedcon NR Pallet Racking, 12,000mm High (USED) · 1610x Frame Nedcon NR, Type 1006720, height options from 2,000 to 12,000mm, depths available in the following sizes: 900/1067/1080/1100x100mm, blue (section load max approx. 15,000kg, depending on beam heights). Frames are supplied in separate components. Both height and depth are variable! · 1400x Beam Nedcon NR, Type CC1004015, 2650x100x40mm, orange (2,150kg) · 16,960x Beam Nedcon NR, Type CC1004015, 2700x100x40mm, orange (2,100kg) · 390x Beam Nedcon NR, Type CC1104015, 2700x110x40mm, orange (2,350kg) Nodpswhi Rzofx Ac Tjcu Heights up to 12 meters and any depth are available. Pricing on request, depending on frame depth and required quantities. We also have a wide range of new and used Nedcon materials and accessories in stock! All prices exclude VAT. Payment: Due upon delivery. Ex warehouse Zutphen. Transport can be arranged if required. Used materials available while stocks last. Bastell Magazijninrichting BV Gerritsenweg 6 7202 BP Zutphen The Netherlands

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Nodpfxsx Av Duj Ac Tjcu

Condition: good (used), 3m x 1000mm thermal oil fryer with teflon infeed and top hold down belt. Nsdpsq Iq Nbjfx Ac Tjcu

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 450 cm x 110 cm, pre-assembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x locking pins. - 288 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 19.900 € net Nodszgbapepfx Ac Tocu plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used GÜNTNER Hermeticool-Hybrid HC-H 100 S-GFHE 080.5/A-N(S)-G4/2P air-cooled water recooler, year of manufacture 2017. Ncodpfxoy Akgyo Ac Tou Project number: 101048869 Device designation: S-GFHE 080.5/A-N(S)-G4/2P Device serial number: 404549442/19.02129 Year of manufacture: 2017 Ambient temperature min.: -30.0 °C Ambient temperature max.: +50.0 °C Volume: 116.2 l Permissible temperature (TS) min.: -50.0 °C Permissible temperature (TS) max.: +100.0 °C Test pressure: 11 bar Fan speed: 2,609 rpm Fan current: 22.4 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, mileage: 144,597 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 2,160 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Conversion: Chilled goods conversion * Company: Hahlbrock * Konvekta refrigeration unit Equipment: * Body type / Build: Refrigerated van * Air conditioning * Rear wing doors * Trailer coupling 1,500 kg Technology: * Composition Media audio system * Bluetooth hands-free system * Electric package 2 * Electrically adjustable exterior mirrors * Central locking with remote control * Multifunction display Plus Safety / Environment: * Driver/passenger airbag * Front side airbags with head airbag unit * Fatigue detection sensor * Electronic differential lock (EDS) * Driver assistance system: Hill start assist * Driver assistance system: Multi-Collision Brake * Low emissions according to Euro 6 emissions standard * Equipment package: BlueMotion Technology Miscellaneous: German first registration * 1 previous owner * Engine: 2.0 L - 110 kW TDI * Wheelbase: 2,682 mm * Truck registration * COC papers available Since 1972, your reliable partner for all matters relating to automobiles/commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps around 200 vehicles in stock, including transporters, commercial vehicles, and construction equipment! Nodpfx Ajxw Ruqjc Tecu We constantly offer attractive financing options with special conditions. If you are interested, we would be happy to provide you with a personalized offer! We accept your commercial vehicle/construction equipment as trade-in. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged by our external partners for an additional fee. The information provided in advertisements, online listings, price tags, and images is non-binding and does not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. The listed features may need to be verified separately. Subject to errors and prior sale.

Condition: used, mileage: 105,050 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2017, emission class: euro6, color: grey, number of seats: 20, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal Vehicle No.: 6538D ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles available immediately. Largest selection - best price. More than 1000 satisfied customers per year - top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 44,600 km New front brakes Maxi Automatic transmission Number of seats: 19+1 Electric sliding door Electr. step Roof air conditioning Air conditioning Auxiliary heater Nozzle ventilation Driver microphone Tachograph Sun visor Roof hatches, fans, roof vents Rear view camera Parktronic system (PTS) Navigation system Speed control system (cruise control) High beam assist Collision warning system with braking function Comfort suspension seat with seat heating Tinted windows Upon request, we offer you an optional trailer coupling retrofit for only 599 euros, and if possible, an increase in the trailer load up to 3.5 tons. ---- Special equipment: * Driver Assistance System: High Beam Assist * Light and rain sensor * Auxiliary heater (air) electric * Generator 250 A Ncsdpfx Aszd I Uuoc Tou * Hill start assist * Audio system Audio 15 (radio with color display) * Outside temperature gauge * Battery disconnect switch 1-pole * Roof control unit with reading spot driver/passenger side * Door entry lights * Deletion of cargo compartment / sliding door * Driver Assistance System: Collision warning system with braking function (Collision Prevention Assist) * Digital tachograph, downloadable * Window in cargo/passenger compartment: - fixed, front left * Window in cargo/passenger compartment: - fixed, front right * Heated windshield * Speed control system (cruise control) * Air conditioning regulated (Tempmatik) * Fuel filter with water separator * Steering wheel (steering column mechanically adjustable) * Metallic paint * Front engine drive with carrier for additional coolant compressor * Navigation system Becker MAP Pilot * Fog lights * Parameterizable special module * Parktronic system (PTS) * Smoker's package * Rear view camera * Interior mirror * Mud flaps rear * Mud flaps front * Seat equipment: comfort headrest, driver's seat * Seats in the cab: driver's seat heated * Seats in the cab: comfort suspension seat, driver's side * Reinforced rear stabilizer * Reinforced front stabilizer * Bumper paintable * Fuel tank sensor for auxiliary heater * Fleece battery 95 Ah * Preparation for additional heat exchanger * Front axle reinforced * Thermal insulation driver's cab * Heat-insulating glazing (windshield with band filter at the top) * Auxiliary heater (hot water) 10 kW with timer Standard equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Anti-lock Braking System (ABS), Drive type: rear-wheel drive, Display for windshield washer fluid level, Exterior mirror elect. adjustable and heated, both, Exterior mirror with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the driver's cab, Electronic Stability Program (ESP), Driver Assistance System: Lane Keeping Assist, Electric window lift 2-fold, Transmission automatic GTronic - (7-speed), Glove compartment lockable, Rear door (opening angle 180 degrees), Body/Structure:

Condition: used, mileage: 116,050 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2017, emission class: euro6, color: grey, number of seats: 20, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: 6537D ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany. Always over 400 vehicles immediately available. Largest selection – best price. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes-Benz New front brakes Like-new all-season tires front and rear Maxi Automatic transmission Number of seats: 19+1 Electric sliding door Electric step Roof air conditioning Air conditioning Auxiliary heater Nozzle ventilation Driver's microphone Trip recorder Sun visor Roof hatches, fans, roof vents Rear view camera Parking assistance system (PTS) Navigation system High beam assist Cruise control Tinted windows Programmable special module Upon request, we offer an optional trailer coupling retrofit for only 599 euros; if possible, also an increase in the trailer load capacity up to 3.5 tons. ---- Nedpfjzd I Unjx Ac Tjcu Special equipment: * Driving assistance system: High beam assist * Light and rain sensor * Auxiliary heater (air), electric * Generator 250 A * Hill-start assist * Audio system Audio 15 (radio with color display) * Outside temperature display * Battery disconnect switch, 1-pole * Roof control unit with reading spot, driver/passenger side * Entry lights * Deletion of cargo area/sliding door * Driving assistance system: Collision prevention assist with braking function * Digital trip recorder, downloadable * Window in loading/passenger compartment: - fixed, front left * Window in loading/passenger compartment: - fixed, front right * Heated windshield * Cruise control * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Steering wheel (steering column mechanically adjustable) * Metallic paint * Front engine drive with carrier for additional coolant compressor * Navigation system Becker MAP Pilot * Fog lights * Programmable special module * Parking assistance system (PTS) * Smoker's package * Rear view camera * Interior rearview mirror * Mud flaps, rear * Mud flaps, front * Seat equipment: Comfort headrest, driver's seat * Seats in the cab: Heated driver's seat * Seats in the cab: Comfort suspension seat, driver's side * Reinforced rear stabilizer bar * Reinforced front stabilizer bar * Bumpers, paintable * Fuel gauge for auxiliary heater * Fleece battery 95 Ah * Preparation for auxiliary heat exchanger * Reinforced front axle * Thermal insulation, driver's cab * Heat-insulating glass (windshield with band filter at the top) * Auxiliary heater (hot water) 10 kW with time setting Standard equipment: 3rd brake light, Adaptive brake light, Airbag, driver's side, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors, electrically adjustable and heated, both, Exterior mirrors with integrated turn indicator, Brake assistant, Braking system with ABS+ASR, Roof lining in the driver's cab, Electronic stability program (ESP), Driving assistance system: Lane keeping assist, Power windows, electric, 2-fold, Transmission: GTronic automatic (7-speed), Glove compartment, lockable, Rear door (opening angle 180 degrees), Body/Structure: High-roof panel van, Standard, Child safety lock

Condition: good (used), FR Korradi milling machine Type: UW1 X-path: 460 mm Ncjdpfjq Eh H Uex Ac Tju Y-path: 260 mm Z-path: 320 mm Max. speed: 1740 rpm Spindle: ISO 40 Bed: 345 x 800 mm Dimensions: 130x110x170 cm LxWxH

Condition: excellent (used), CATALOG NUMBER 7003 Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate) Ncedpfx Acjy Tudde Tju

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 4,041 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 1,150 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 16X7X10 1/2, rear tire size: 23X10-12, overall weight: 7,900 kg, empty load weight: 4,900 kg, total height: 2,350 mm, total length: 2,200 mm, total width: 1,950 mm, color: green, motor model: V1505-T, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, Looking for a reliable forklift? We are industry specialists! We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition. Browse our offer and find the perfect equipment for your business! Featured in this listing: COMBILIFT C3000 – DUPLEX 4100mm – Year 2013 – 4041 MTH – DIESEL – FREE LIFT – FORK POSITIONER – SIDE SHIFT – 1150mm FORKS – CONDITION: 5/5 The forklift is in excellent technical condition and ready for immediate use. Key Features and Technical Specifications: - Model: COMBILIFT C3000 - Year of manufacture: 07/2013 - Lifting capacity: 3,000 kg - Operating hours: 4,041 mth - Mast type: Duplex - Lift height: 4,100 mm - Power source: Diesel - Load center: 600 mm - Total weight: 4,900 kg - Tyres: Solid, superelastic, in good condition - Front tyres: Superelastic – 16X7X10 1/2 – 100% tread - Rear tyre: Superelastic – 23X10-12 – 100% tread - Overall height (mast lowered): 2,800 mm - Technical condition: Fault-free, after full service inspection - Visual condition: Very good - Fork length: 1,150 mm - Free lift: 2,000 mm - Overall height: 2,350 mm - Overall length: 2,200 mm - Overall width: 1,950 mm - Fork positioner width: 1,200 mm Equipment: - Lighting - Adjustable boom - Side shift - Pallet forks - Fork positioner - Cabin Ideal for industries such as: - Timber and lumber - Steel and pipe - Any operations requiring transport of long loads in confined spaces Thanks to its four-way capability, this forklift ensures easy maneuverability and optimal use of warehouse space. Ncsdpfx Aezgxqlsc Tju Additional Features: - Integrated multidirectional steering system - Comfortable operator cabin - High reliability during intensive use - Suitable for indoor and outdoor operation Condition: A fully operational machine, regularly maintained, and ready for immediate work. We offer delivery across Europe and include a free initial inspection!

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,888 h, load capacity: 4,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,780 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,200 mm, color: yellow, motor model: V2403-M-T-ET05, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🏆 Years of experience | 🛠️ In-house service & paint shop | 💡 Expert consultancy | 🚛 Own transport fleet | 🤝 After-sales support ❓ Looking for a forklift you can trust? We are a reputable dealer of new & used forklifts with a long-standing tradition. We serve customers across Europe – from small businesses to large industrial plants. With us, forklifts are more than machines – they are your guarantee of efficient and reliable logistics. -- Why choose us? -- ✅ Every forklift undergoes comprehensive technical preparation (inspection, testing, filter & oil replacement, refurbishment of key components) ✅ Full UDT inspection available upon request ✅ Own paint shop & service workshop – machines thoroughly perfected, both visually and technically ✅ Europe-wide transport with our own fleet and experienced drivers ✅ Operator training included upon delivery + functional test on-site ✅ Reliable after-sales service & technical support ✅ See and test the machines in person – we warmly invite you! ✅ Hundreds of satisfied customers throughout Europe – join them today ✅ Flexible financing solutions – collaboration with leading leasing companies ✅ Invoice in EUR or PLN – your choice -- 🔥 AVAILABLE NOW: COMBILIFT C4000 – Multi-Directional Forklift -- 📅 Year: 2019 ⏱️ Hours: 2,888 mth ⛽ Power: Diesel Ncedszgxl Njpfx Ac Tsu 📦 Capacity: 4,000 kg 📏 Mast: Duplex – 4,100 mm 🔩 Fork positioner 1,320 mm | Forks 1,200 mm 🛞 Superelastic tyres – like new ⬆️ Free lift: 2,000 mm ⚙️ Technical condition: Excellent – fully serviced ✨ Visual condition: Rust-free, well maintained, ready to work 📐 Dimensions: Height: 2,400 mm Length: 2,300 mm Width: 2,200 mm Positioner width: 1,320 mm Overall height: 2,780 mm -- Ideal for: 🏭 Warehouses with limited aisle space 🌲 Wood, steel, and pipe industries 📦 Handling long materials 🏢 Indoor & outdoor use 🚀 FT Logistics – Quality you can rely on. Service you can trust.

Condition: excellent (used), I am offering a professional industrial extraction unit / industrial vacuum cleaner from the renowned German brand AL-KO, model POWER UNIT APU 100. This unit is designed for extracting dust and contaminants in an industrial environment – ideal for workshops, carpentries, and manufacturing plants. The equipment is in very good technical condition and ready for immediate use. ⚙️ Technical Specifications - Manufacturer: AL-KO (Germany) - Model: POWER UNIT APU 100 - Year of manufacture: 2021 - Power supply: 400V / 50Hz (3-phase) - Motor power: 1.5 kW - Airflow: approx. 865 m³/h - Negative pressure: 2124 Pa - Connection diameter: 100 mm - Speed: 2896 rpm - Protection class: IP54 - Weight: approx. 116 kg ✅ Technical Condition - Complete device - Fully functional, ready for operation - Very good visual condition - No mechanical damage - Used – normal signs of use Ncedpfx Acjyxtf Re Tsu 📦 Included in the set - AL-KO POWER UNIT APU 100 extraction unit - Complete set as shown in the photos - Documentation (user manual) 🏭 Typical Applications - Carpentry workshops and wood processing plants - Production and workshop environments - Dust and chip extraction - Dust extraction systems

Condition: excellent (used), For sale: Professional milling toolholder by ORION – high German manufacturing quality. • Type SK40 Ø6-100 • DIN 69871 AD standard – central cooling • Collet for Ø6 mm • Length 100 mm • Includes tool (milling cutter / drill bit) • Very good used condition, fully functional ORION toolholders are a reliable choice for CNC machining centers and milling machines with SK40 taper. PRICE IS FOR 1 PIECE. Ncjdpfxjxcgxve Ac Teu

Condition: excellent (used), For sale: professional tool holder from the renowned brand WNT Germany – model B40 ER16M A=100. The holder is equipped with a Centro-P Germany HPC16MS-DI precision collet, ensuring maximum accuracy and clamping stability. The set also includes a VHM drill, making it ready for immediate use on a CNC machine. Condition: very good, the holder is fully functional, no play, with normal signs of use. Premium-class equipment – ideal for professional machining centers where precision and reliability are crucial. Nodpfx Asw Rr A Dec Tscu

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Ncedoyc H I Sjpfx Ac Tsu Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: used, Year of construction: 1970, machine/vehicle number: P5063870, functionality: not functional, power: 4.05 kW (5.51 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 75 t, table width: 800 mm, table length: 620 mm, table height: 740 mm, throat depth: 300 mm, distance table to ram: 450 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 2,700 mm, overall weight: 4,475 kg, year of last overhaul: 2026, punching force: 75 t, compressed air connection: 8 bar, control cabinet height: 1,300 mm, control cabinet length: 350 mm, control cabinet width: 500 mm, DGUV certified until: 05/2027, drop-through hole in table: 250 mm, height adjustment type: mechanical, installation height: 450 mm, mount diameter: 40 mm, ram adjustment: 80 mm, ram bore: 40 mm, stroke adjustment: 140 mm, Stroke adjustment 16-140mm Mechanical safety guard Flywheel drive with reversible idler gear Overall height with raised safety guard approx. 4100mm Additional clamping plate 790x610mm with insert diameter 250x120mm Spring-loaded base Njdpfoyv Havex Ac Tecu