Used Eccentrical Press for sale (12,530)

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Nwedezbvvvepfx Agrjl Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm Njdou Rwa Ispfx Agrowl ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressing force: 250 t, table width: 1,200 mm, table length: 2,000 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, ram adjustment: 150 mm, stroke adjustment: 40,200 mm, Raster Punching and Forming Press RSU 2500 - 2000 P Desch Compact Drive Electronic Press Force Measurement System Hydraulic Overload System 3-part Tie Rod, Cast Design Tool Carrier Njdpfjxcbbrsx Agrswl Table and Ram Clamp Raster VWA Hydraulic Roller Feeder, Band Width 500 mm, with Topochrom Roller Coating Ram Surface: 1000 x 2000 mm Strokes per minute: 20 – 150 Stroke Adjustment: 40 – 200 mm Raziol Segment Roller Oiler Optional with Kohler Strip System 20030.400/9-2000.2H

Condition: good (used), Year of construction: 1973, machine/vehicle number: 727173, Offer 25450 Nwsdpfx Aoxxvzljgrjl Technical Data: - Pressing force: 100 t - Throat depth: 300 mm - Table size: approx. 650 x 450 mm - Table height adjustable - Pass-through hole in table: approx. 200 x 100 mm - Max. installation height: approx. 450 mm - Ram surface: 70 x 140 mm - Pin hole in ram: 40 x 80 mm - Ram adjustability: 60 mm - Stroke adjustment: 10 - 100 mm - Strokes per minute: 80 /min - Pneumatically assisted clutch - Drive: 380 V / 5.5 kW - Space requirement (approx.): W 1350 x H 2550 x D 1600 mm - Weight (approx.): 5000 kg

Condition: good (used), Stock number: 2829 Nwjdpfex Uwb Iox Agrel Manufacturer: Eisenwerk Hensel Bayreuth - EBU Machine number: P5044070 Type: SK 25 Press force: 25 t Table: 595 x 410 mm Ram: 170 x 150 mm Passage hole: 210 x 170 mm Throat depth: 200 mm Strokes per minute: 150 Stroke: 4 to 80 mm Ram height adjustment: 70 mm Table adjustment: 240 mm Condition: good Connection: 1.5 HP (1.1 kW) Weight: 1.5 t Dimensions: 800 x 1,300 x 2,000 mm

Condition: good (used), Year of construction: 1960, functionality: fully functional, Weingarten Eccentric Press ER 80 – 80 tons – Year of manufacture 1960 For sale is a robust WEINGARTEN eccentric press, type ER 80, manufactured in Germany. Technical specifications: Manufacturer: Maschinenfabrik Weingarten A.-G. Nwjdpfxjzkhnne Agrel Type: ER 80 Pressing force: 80 tons Stroke rate: 60 strokes/min Adjustable ram stroke: 8–112 mm Ram adjustment: 80 mm Year of manufacture: 1960 The machine is in used condition, commensurate with its age. Ideal for metalworking, stamping, and forming operations. Inspection possible by arrangement. Sale from the current location; the seller will handle loading, and the buyer will organize transport.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, operating hours: 45,000 h, pressing force: 80 t, stroke length: 30 mm, table width: 780 mm, table length: 880 mm, ram plate width: 650 mm, ram plate length: 800 mm, Equipment: CE marking, documentation/manual, Balconi press 80 tons Nwjdpfxoy Ulbve Agrsl strokes 100-400 adjustable stroke 30 mm die opening 350 mm machine weight 15,000 kg includes soundproof cabin

Year of construction: 1965, condition: good (used), Table area 1,400 x 950 ram surface 1.000 x 600 ram adjustment 135 mm Stroke 60 - 200, stroke /min. 24 Nedpfspwgy Hjx Agrewl

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm Njdpfx Aju Nfibsgrewl height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm Nedpfx Agey Tvdxorswl - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm - Weight (approx.): 9400 kg

Condition: used, Year of construction: 1977, pressing force: 75 t, Eccentric press EBU SK75 U Year of manufacture: 1977 Location: Bad Tölz Nwsdpfxezv Skds Agrsl Inspection is welcome. We have other used machines available. Please feel free to contact us.

Condition: good (used), Year of construction: 1981, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 40 t, table width: 660 mm, table length: 530 mm, total length: 15,850 mm, total width: 12,450 mm, total height: 23,700 mm, overall weight: 4,500 kg, ram adjustment: 80 mm, stroke adjustment: 95 mm, LEN 40C Eccentric Press. Year of manufacture: 1981 (SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in the machine: 70/142 min - number of strokes manual operation: 50 min Nsdpfx Astzwt Ujgrowl - slider stroke adjustment: 8-95 mm - slider stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - extension: 265 mm - engine power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm - weight: 4500 kg The technical condition of the machine is good. It is possible to inspect and check the machine in motion.

Condition: used, Year of construction: 1961, pressure 075 t throat 230 mm stroke 6 - 100 mm no. of strokes 105 /min distance table/ram, max. stroke up, adjustment up 354 mm table surface area 700 x 420 mm hole in the table 250 mm table height over floor 800 mm passage to the back 310 mm ram surface 264 x 270 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,6 t Nwsdpfx Aezrpp Nsgrel dimensions (WxDxH) 1,2 x 1,6 x 2,3 m with motor, friction clutch, manual stroke adjustment, manual ram adjustment, inclineable, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1962, pressure 025 t throat 200 mm stroke 8 - 80 mm no. of strokes 180 /min distance table/ram, max. stroke up, adjustment up 330 mm table surface area 550 x 400 mm hole in the table 60 mm table height over floor 800 mm passage to the back 200 mm ram surface 355 x 220 mm Nsdezrprqspfx Agrjwl ram adjustment 50 mm power requirement 2,7 kW weight 2,5 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m

Condition: used, Year of construction: 1961, pressure 063 t throat 280 mm stroke 8 - 100 mm no. of strokes 65 /min Nedpfxjzrprdo Agrowl distance table/ram, max. stroke up, adjustment up 415 mm table surface area 620 x 500 mm hole in the table 230 mm table height over floor 800 mm ram surface 310 x 255 mm ram adjustment 63 mm power requirement 5,5 kW weight 3,95 t dimensions (WxDxH) 1,2 x 1,8 x 2,4 m with motor, friction clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1987, Kapasite : 300 ton Hava Tüketimi: 30 m³/saat Nwsdpfx Ajzxra Rjgrol Güç: 38 kW Kapladığı Alan: 13,20 m² Üst Tabla Ebatları : 1800 x 900 mm Alt Tabla Ebatları : 1300 x 1200 mm Pres Yükseklik : 4.000 mm Pres En : 2.200 mm Pres Genişlik: 1500 mm Dakikadaki Vuruş Sayısı : 40 spm used

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Nwedpfxeykbcme Agrel Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, pressing force: 10 t, stroke length: 65 mm, table width: 450 mm, table length: 320 mm, ram plate width: 280 mm, ram plate length: 180 mm, total length: 1,145 mm, total width: 970 mm, total height: 1,930 mm, overall weight: 1,250 kg, Equipment: documentation/manual, Excentric Press LEN 10C. Year of manufacture: 1987 (SMERAL TRNAVA, Czech Republic). - Press force: 10 Tons, - Number of ram strokes in continuous operation: 80 or 160 /min, - Number of single strokes: 45/min and 60/min. - Adjustable ram stroke: 6–65 mm, - Adjustment range between table and ram: 45 mm, - Throat depth: 160 mm, Nwsdpfxjy Ry Tfo Agrol - Distance between table and ram: 225 mm, - Table size: 450 x 320 mm, - Ram size: 280 x 180 mm, - Overall dimensions (length x width x height): 1145 x 970 x 1930 mm, - Pneumatic clutch (min. compressed air pressure: 0.4 MPa), - Motor power: 1.1/1.5 kW, - Press weight: 1250 kg.

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Nwodpsv T Dapjfx Agrel Ram adjustment 80 mm Stroke rate 50 /min.

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m Nodpfxjzwg Umo Agrowl

Condition: used, Technical details: Nwedpfeu N Ddwex Agrel pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Nsdpfsw R Tl Tsx Agrswl Name: Eccentric press SCHULER Model: PD 63 Press force: 63 tons Press dimensions L x W x H: 1800 x 1300 x 2500 mm Press weight: approximately 4500 kg Table dimensions L x W: 700 x 550 mm Table opening L x W: 265 x 265 mm Ram L x W: 320 x 300 mm Pusher stroke: 135 mm (fixed) Maximum distance of the ram from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Commands: single (foot pedal, two-hand control), continuous (automatic mode - setting the time interval 1-99999 seconds and the number of repetitions 1-32000) A special function for determining the lower position of the ram Automatic machine lubrication Pneumatic activation and braking. Note: Two identical presses are offered (the only difference is in the size of the display: 7" and 4.3"). Technical documentation is not available. Online assistance from a programmer for PLC programming is possible. Shipping costs are additional. Urgent sale, due to a change in business, the presses are no longer needed for production, and I need more space for new equipment. The price is absolutely fixed; after March 1st, they will be disconnected from the power supply.

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Nwodpferm Nqmox Agrsl Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Press is currently mechanically reassembled

Condition: ready for operation (used), Year of construction: 1962, Eccentric press with black shield, Nwedpfju Rrrfox Agrsl Pressure capacity 15 t, Stroke adjustment from 5 - 60 mm, Table dimensions: 550 x 360 Dimensions: W 800 x D 1200 x H 2200 mm Weight 800 kg,

Condition: used, Year of construction: 1997, Press force: 1000 t Stroke: 315 mm Strokes per minute: 21 - 42 /min Nodozypx Tjpfx Agrswl Frame width: 1260 mm Side frame opening: 830 mm Shut height (max. stroke, top position, adjustment upwards): 1295 mm Table area: 1250 x 800 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Table height above floor: 670 mm