Used Eht Ehp 15-30 for sale (35,829)

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm Ksdpfx Afo Dqaqjvjdl rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t space needed: 2100 x 3800 x 3100 mm

Year of construction: 1995, condition: ready for operation (used), Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible. Kjdpfstva Dnjx Afvedl

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY Kdjdpfxjb Rk Eks Afvsl - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs - Front angle gauge - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW Kdedpfxexp Hp Us Afvel - Required floor space approx.: W 4350 x H 2100 x D 2200 mm - Weight approx.: 8.5 t

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW Kodpjtqmvzsfx Afvjdl - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, stroke length: 200 mm, controller model: Cybelec DNC 70, bending force (max.): 110 t, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Press force: 110 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Frame throat depth: 400 mm Ram stroke: 200 mm MACHINE DETAILS Control system: Cybelec DNC 70 Kdjdpexxqtcjfx Afvsl Drive power: 15 kW Weight: 9,500 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, oil tank capacity: 400 l, controller model: Cybelec ModEva 19 T, bending force (max.): 300 t, distance between stands: 3,550 mm, working length: 4,050 mm, The machine control was renewed in 2022! TECHNICAL DETAILS Press force: 300 t Bending length: 4,050 mm Distance between uprights: 3,550 mm Oil capacity: 400 l MACHINE DETAILS Control system: Cybelec ModEva 19 T Total power requirement: 22 kW Machine weight: approx. 20,000 kg EQUIPMENT 2 bending aids Matrix displacement Pneumatic tool clamping, top and bottom Crowning Controlled axes: y1, y2, x, R, z1, z2 Two-hand foot control 2 parking stations for bending aid Kdodexwnqcspfx Afvel

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW Kdedpfx Afsw Sttasvjl - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Condition: ready for operation (used), Year of construction: 2002, Very well-maintained, used press brake from Darley. Kdsdpsy Szikjfx Afvsl Type: EHP LS 230 43 37 Capacity: 4300 x 230 tons Delem DA 66W CNC control CNC crowning Y1, Y2, X1, X2, R1, R2, Z1, and Z2 axes CNC controlled Hydraulic Wila New Standard top and bottom clamping Includes 1 set of tooling as shown in the picture.

Condition: new, 2021 Durma 15 kW Fiber Laser Make: DURMA Type: HD-F(L) 3015 Kdodpsgk Nlpjfx Afvjl Working range X-Y-Z: 3060x1530x160 mm Laser power: 15000 Watt IPG Control: Siemens Sinumerik 840D sheet thickness mild steel: 40 mm Sheet thickness stainless steel: 30 mm Sheet thickness aluminium: 30 mm Sheet size: 3048x1524 mm Loading weight: 200 kg/m² Speeds X-Y axes: 100 m/min. Speeds X-Y axes simultaneous: 280 m/min. positioning accuracy: +/- 0,05 mm Repeating accuracy: +/- 0,05 mm Installation area L/W/H: approx. 14500x7500x2420 mm weight: approx. 12000 kg Standard equipment Automatic pallet changer Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface parameter page (power-speed-pressure) External CAD/CAM programming software with autonesting optional Lantek software Work area lighting Warning light Multi-chamber exhaust system Special laser cutting options Remote maintenance CE marking IPG fiber laser source 15000 Watt including cooler Extended equipment possible: Filter, compact dust collector Vanterm Motorized chip conveyor for small parts/waste Laser Service Set Cloud License Lantek Expert Inside Software Lantek software with positioning - laser diode with automatic sheet metal position detection, measurement Camera Inside Linear drive We will be pleased to send you further information on request.

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 30 W, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, The Durma HD-F 3015 Fiber laser cutting machine in 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine developed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability and outstanding customer service. Features: 30 kW / 80 mm mild steel 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal distance F300 mm Conveyor system Technical data: Power: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis stroke: 160 mm Maximum synchronous speed: 170 m/min Maximum synchronous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeat accuracy: +/- 0.02 mm Product description of the Durma HD-F 3015 in 30 kW: Powerful and Efficient: equipped with a 30 kW fiber laser, the Durma HD-F 3015 offers outstanding cutting performance and precision for a wide range of materials, including steel, aluminum and copper. Spacious work area: With a work area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC control: The user-friendly and precise control allows for easy handling and optimizes cutting paths to minimize material waste. Automatic nozzle changing system: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy efficiency: The laser is characterized by high energy efficiency, resulting in lower operating costs. Robust design: The machine impresses with its durability and reliability, even under demanding working conditions. Kodpfx Asq Nl T Tsfvedl Safety: Comprehensive safety functions ensure safe operation. Versatility: Compatible with various laser cutting software solutions, it is suitable for a wide range of industries. Durma Maschinen GmbH - your reliable partner: As the manufacturer of the Durma HD-F 3015, we, Durma Maschinen GmbH, pride ourselves on our fast and efficient service and our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure that our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting needs. Interested in the Durma HD-F 3015 in 30 kW? Contact us for a no-obligation consultation or a customized quote. At Durma Maschinen GmbH, we will be happy to answer all your questions and find the best solution for your needs. We look forward to your inquiry!

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper stripper + €970 net * recommended for extremely thin materials with a thickness less than 3 mm Our mütek single-shaft shredder MRZ 530 processes a wide variety of materials such as all types of wood residues, softwood, chipboard and MDF, pallets, construction timber, demolition wood, carpets, cables, paper, cardboard, and plastics. The machine is characterized by its robust design, ensuring consistent quality in continuous operation. We are pleased to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible Rotor diameter: 260 mm Kedpfxjd Db N Io Afvsdl Control: Siemens S7-1200 PLC Hopper (mm): 510 x 810 mm Hopper volume approx. 0.4 m³ Throughput: 1 - 5 hopper fillings/hour Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction nozzle Ø 160 mm Weight approx. 1,000 kg Dimensions approx. 1550 x 1100 x 1640 mm Moisture content of raw material: must be below 30% a.d. Standard features included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star-delta start • Automatic shut-off in case of rotor idle • Removable extraction channel • Speed 70 - 100 rpm for higher throughput • Cycle control to prevent idle time • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) Requirements for input/raw material: - Moisture content (a.d.) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear

Condition: good (used), Year of construction: 2019, 6x pallet wrappers, Jungheinrich, Premium, open turntable, Ø 1,500 mm, infinitely variable turntable drive – used -: Price ex-location: only €4,500 (net)! Manufacturer: Jungheinrich Type: Ameise Superstretch 152 30 GV mas3Ph Year of manufacture: 2019 / 2020 Model: Premium Max. pallet width: 800 mm Max. pallet length: 1200 mm Max. pallet weight: 1,500 kg Max. pallet height: 2,400 mm Pallet height detection Condition: good Available: immediately Location: Erfurt, later warehouse Augsburg Ksdpfx Afeyrq D Aovodl Item no. 11 / ? / 17 / 36 / 37 / 40 /

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length Kdedpfx Afjkvnc Ssvol 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Kedpfx Afsyvh S Tevedl Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1996, output 30 kW suction power 4.200 l/min turning speeds 5.092 U/min Kdodpfx Afjxu Ntasvsl overpressure 10 bar dimensions of machine L x W x H 1,72 x 0,90 x 1,60 m

Condition: ready for operation (used), Indramt TDM 2.1-15-300-W0 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Kdodpfsi Ebryex Afvol

Condition: new, Lubrix MQL-Systems 0003055 (M12) G 1/2 DN 15, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdedpei Eby Sofx Afvol

Condition: ready for operation (used), Heidenhain BC 120 monitor unit 15" TFT SN: 30938147 consisting of Heidenhain 329 506-01 additional keyboard and Viscotech SEM15-F-BC120-FP industrial monitor for TNC426, TNC430 / BC120, BC120F, used, in good condition, 100% functional, scope of delivery as per photos. Kodoy Nqdfspfx Afvodl

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 280 mm, table length: 280 mm, table load: 300 kg, rotary table diameter: 280 mm, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 189, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This HERMLE C30 U is still currently in production and will be available from week 42. The machine is still in daily use for extremely high-precision machining and is also in excellent condition, having always been perfectly maintained by HERMLE NL. The complete maintenance history is available after purchase. (Viewing on site is possible by appointment) Additional options & accessories: - Extended tool magazine (ZM 157) - Pallet system RS1 (KUKA robot) including pallets and Soflex control system - NC rotary table Ø280 mm - Chip conveyor - 6-fold pass-through - A-axis position eccentric - Internal coolant supply (IKZ) (40 - 80 bar) - Conveyor belt filter for IKZ - Chip trolley 450L - Blow-off device - Air blast through the spindle - Electronic heat compensation iTNC - Electronic handwheel - Renishaw probe - Oil mist extraction Weight & dimensions: C30 U: 10,000 kg, RS1: 4,000 kg, ZM175: 2,500 kg Setup dimensions: approx. 6.5 × 4.5 m, floor space: ≈ 29 m² Kdodjy Ib Daepfx Afvsl

Condition: new, sheet width 1550 mm plate thickness 4,5 mm pre-bending 4,0 mm roll length 1550 mm min. dia. 190 mm roll diam. toproll 130 mm weight 1265 kg dimensions 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device Kdodpfxsyvvrhj Afvsl - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, We are selling this lathe. Centre distance: 8,000 mm Centre height: 1,100 mm Max. turning diameter over support: 1,550 mm Max. turning diameter over bed: 1,600 mm Max. workpiece weight between centres: 30 t Siemens Sinumerik 840D Ksdpfx Afexzr A Djvjdl

Condition: used, Year of construction: 2007, color: yellow, For vehicle inquiries, Mr. Seidel will be pleased to assist you (by phone). MAN TGL 8.150 4x2 Aerial Work Platform Superstructure: Bison Palfinger TKA 30, Working height: 30 m, Platform length: 1.62 m, Platform width: 0.82 m, Outreach: 18.4 m, Capacity: 3 persons, Payload: 280 kg, Number of seats: 2, Manual transmission, Engine brake, ABS/ESP/ASR, PTO, Halogen headlights, Beacon lights, Hydraulic system, Tyre tread depth: 1st axle 11 mm, 2nd axle 12-13 mm. On request, we can provide you with a leasing or financing offer. Kdodpfx Aeyxkpyjfvjl Mr. Seidel (phone) is happy to assist you. Further information is available on our homepage. ... Subject to errors, changes and prior sale! ... Power steering, ABS, ESP, crane = Further Information = Mileage: 118,885 km Intended use: Construction Unladen weight: 7,490 kg Please contact Tobias Ebert for further details.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,580 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 150 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, power: 44.7 kW (60.78 HP), motor manufacturer: Kubota, gearing type: hydrostat, battery voltage: 12 V, fork length: 1,200 mm, tire condition: 80 %, overall weight: 4,530 kg, total height: 2,300 mm, total length: 4,080 mm, total width: 1,323 mm, color: red, Equipment: CE marking, cabin, front guard, full service history, head guard, pallet forks, === KEY SPECIFICATIONS === Year: 2015 Working hours: 2450.8 h Max. lifting capacity: 3000 kg Max. lift height: 4.70 m Mast type: Triplex Fork length: 1200 mm Side shift: Yes Drive: Diesel Transmission: Hydrostatic Cabin: Closed Heated cabin: Yes Tyres: Pneumatic rough terrain Kedoyu Hp Hspfx Afvjdl Stabilisers: No Engine manufacturer: Kubota Engine model: V2403-T Emission class: Stage IIIA Weight: 4530 kg CE certification: Yes === HIGHLIGHTS === Carefully selected machine with verifiable history CE-certified and supplied with full documentation Ready for immediate use and transport Reliable rough terrain forklift suitable for construction sites and outdoor operations === CONDITION === Good working condition – fully checked and tested. Machine shows normal cosmetic wear consistent with working equipment. Surface rust visible on forks and mast. Cabin in good condition. Tyres approx. 75% remaining. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, The Netherlands Worldwide delivery available Price: €25,985 (EXW / excl. VAT) Reliable Manitou MSI 30 T rough terrain forklift with 3000 kg lifting capacity and lifting height up to 4.7 meters. Designed for demanding outdoor applications such as construction sites, agriculture and industrial yards. Large pneumatic tyres provide excellent traction on uneven terrain. Powered by a Kubota V2403-T diesel engine with hydrostatic transmission for smooth and precise operation. Machine ready for immediate use. === DELIVERY === Crane loading available on request Flexible worldwide shipping options available Transport handled by professional logistics partners

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 1,667 h, Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.490 kg Functional Lifting capacity: 1.500 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Production country: DE Ksdpfx Afow Tykbjvsdl Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 • 2019 • 1667 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity • 30-meter hook height • 25-meter horizontal reach • The fuel engine and printed circuit board were replaced in March 2025