Used Ekra Stencil Printer for sale (2,721)

Condition: used, SLM Solutions Type: SLM 500 Build volume (L x W x H): 500 x 280 x 365 mm (excluding substrate plate height) 3D optics configuration: Quad (4 x 700 W) Klodjzh Dqtepfx Ah Asw Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm Min. feature size: 150 µm Focus diameter: 80 µm - 115 µm Max. scanning speed: 10 m/s Average protective gas consumption during the build process: 16 l/min (argon) Average protective gas consumption during the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Kljdpjzh Dqmsfx Ah Aew Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 Layer thickness: 20-80 μm Manufacturing speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage duration: Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Inox 200 lifting device Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutting unit NA 7-11 H CL EU Zone 22 Dimensions: 800 x 480-570 x 755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Klsdpfozh Dp Nox Ah Aow Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder automatic sieving station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Kedpjzh Dp Aefx Ah Aslw Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system Kedpfxjzh Dn Ee Ah Ajlw 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded to Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer. Scope of delivery: Eos M270, cooler and software Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2013, Stratasys 3D printer Dimension Elite Maximum build volume : 203x203x305mm Kodpfjt Dq Rlox Ah Aslw Size: 686x914x1041 Weight (kg): 136

Condition: repair required (used), functionality: unexamined, machine/vehicle number: SG77S36002, Year of construction: 2017, overall weight: 2,000 kg, Printer / Several packages containing machine components "HP Jet Fusion 3D 4200 Printer" for industrial 3D printing solutions - Weight: approximately 2,000.00 kg - Year of manufacture: 2017 - S#: SG77S36002 - Product No.: M0P49B Mechanical damage is being reported. The various components of the printing system were inspected in the warehouse. Throughout and on all packages, mechanical damage in the form of deformations, dents, altered gap dimensions, tears, and scratches on the various side surfaces and elements were found. In some cases, the deformations are so severe that flaps and connections have burst and/or can no longer be closed. It can be assumed that the packages collided with each other during transport and were delivered in this condition. Kedpfx Ahszhwgns Aelw The printer is sold as is, from the warehouse, and with damage – without warranty.

Condition: good (used), Panel-mounted measuring instrument, panel-mounted measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring instrument, control panel, temperature measuring device -with: Measurement and control technology type M19 Klodpfx Asfcqrreh Aow -Measuring range: 20 - 600 °C -Connections: 6 -Dimensions: 545/285/H350 mm -Weight: 21 kg

Condition: used, Label printer, barcode printer, printer, logistic labeling system -Labeler Anvos Model PB 101 FlagTag Type: HA101FTS -Barcode printer manufacturer SATO type: CL408e-2A -Max. Print width: 110 mm Klodsdvnbqjpfx Ah Ajw -Dimensions: 880/560/H1365 mm -Weight: 104kg

Condition: used, Inkjet printers, label printers, barcode printers, printers, logistics labeling systems, inkjet printers, thermal inkjet printers, control units for inkjet printers Kledpfjykpg Tex Ah Aew -Condition: untested, message on display: -Device needs cleaning- -Handover: in its current condition as inspected -Manufacturer: Keyence, inkjet printer with accessories -Type: MK-G1000 -Touch panel: MK-P5 -Individual components/accessories: see photos -Submission/Price: complete -Transport dimensions: 465/380/H630 mm -Weight: 58 kg

Condition: used, letter stencils negative stencils -Letter stencils: negative stencils, extensive range -Type: German medium mirror, large letters numbers symbols Kodju Intgspfx Ah Aelw -Dimensions box: 465/330/H65 mm -Weight: 8.1 kg

Condition: used, Small character inkjet printer -Machine: has not been checked and is sold as a spare parts carrier -Dimensions: 500/600/H1750 mm -Weight: 40 kg Ksdeb A H Ivspfx Ah Aolw

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/ -Dimensions: 265/145/H145 mm -Weight: 3 kg Ksdpfxjfuw Npo Ah Ajlw

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Klodpfezhlr Eox Ah Aow Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes. Kjdpfx Ahorz N Imj Ajlw

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. Klsdpfozh Nayox Ah Aow The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request.

Year of construction: 2023, condition: ready for operation (used), A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible. Kedpfjzhw R Hox Ah Ajlw

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) Kljdpfxjzg Tz Ej Ah Asw + Filament spools (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Ksdpfxezg Tzlj Ah Aslw Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, HP Indigo Press 7800 The machine is in excellent condition, still installed, and currently in operation. It can be inspected under production conditions by appointment. According to the current owner, there are no outstanding technical issues, and the machine is fully up to date. Machine details: Manufacturer: HP Indigo Model: HP Indigo Press 7800 Serial number: IL 47000146 Year of manufacture: February 2015 Impression counter: approx. 19.7 million impressions, as of June 2025 Number of authorized colors: 7 Number of installed colors: 7 White ink authorized: Yes Machine still in production: Yes Availability: immediately, but not urgent Configuration and features: • 7-color configuration • White ink authorized • Thick substrate kit • One-Shot technology • Inline spectrophotometer • OFIR kit • Spare Ink Tank S3 • Chiller unit • UPS system • HP service contract • HP Production Pro for Indigo IN100T Digital Front End Hardware • HP Indigo Z4 G4 2133 V2 Control PC • HP Software Version 16.2.2 Technical and optical condition: The machine is reported to be in very good condition. According to the seller, there are currently no outstanding technical issues. The machine is fully maintained and up to date. In 2023, the entire material path was renewed/replaced, from the feeder to the stacker. This is a very important value factor, as the material transport section is one of the most relevant areas for stable and reliable production. Ksdezacdwopfx Ah Aslw

Condition: good (used), functionality: limited functionality, 3D Printer Roboze ARGO 500 29-003 Includes 1 HT filament dryer and slicing software Technical data: -Build volume: 500x500x500 mm -Positional accuracy: 10 μm (ultra-precision) -Chamber temperature: 180 °C -15 advanced sensors -Versatile options (9 different industrial materials) -Serial number: A507522P For sale to commercial customers only. Kljdpfx Ajzhmz Ueh Aow Net price = 120,000.00 € Gross price = 142,800.00 € You will receive an invoice with VAT shown.

Condition: excellent (used), color A4 printers in very good condition Ksdpfx Ahszh I Ato Aslw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: 1 black printer 1 white printer Kedpozh I Aajfx Ah Aelw Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Magnifier lamp Kledpfxjx Hwcis Ah Aow PC, monitor, keyboard You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Connectivity: USB, Ethernet, Wi-Fi Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Kedpfx Aheqy E N Sj Aelw Condition Note: Company-used printer, always stored in optimal conditions.