Used Endress+Hauser Pressure Hydrostatic for sale (15,508)

Condition: used, Year of construction: 2020, Coordinate grinding machine Hauser 3 SM, year of manufacture 1996 Bdedpfx Aozc Eihofweg Surface grinding machine Okamoto, year of manufacture 1996 Cylindrical grinding machine Weiss W11, year of manufacture 2009

Condition: excellent (used), I sell a hardness tester HAUSER 290 DR. Bsdpju Udqrefx Afwjdg

Condition: ready for operation (used), Hauser KM 7.0 / / 0 motor spindle, used, shows normal signs of wear, 100% functional, scope of supply as shown in the photos. Bedpfx Aolrzlfsfwedg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 650 mm, travel distance Z-axis: 130 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 12 m/min, table length: 770 mm, distance table to spindle center: 585 mm, type of input current: three-phase, table load: 500 kg, overall weight: 4,550 kg, travel distance W-axis: 500 mm, distance between stands: 750 mm, clearance between the columns: 750 mm, Equipment: documentation/manual, CNC Jig grinder HAUSER S 40 400 TECHNICAL CHARACTERISTICS : Stroke X axis : 650 [mm] Max. Stroke speed X axis : 4000 [mm/min] Working feed X axis : 0 - 1800 [mm/min] Stroke Y axis : 450 [mm] Working feed Y axis : 0 - 1800 [mm/min] Stroke Z axis : 130 [mm] Min. Stroke speed Z axis : 0.5 [mm/min] Max. Stroke speed Z axis : 12000 [mm/min] Stroke frequency Z axis : max. 4 [Hz] Stroke W axis : 500 [mm] Planetary speed C axis : 5 - 250 [rpm] Max. Stroke speed W axis : 800 [mm/min] Stroke U axis (radial feed) : 5.5 [mm] Distance between columns : 750 [mm] Table length : 770 [mm] Table width : 630 [mm] Clearance between grinding motor and table : 585 [mm] Max. load on table : 500 [Kg] Supply voltage : 400 [V] Weight : 4550 [Kg] EQUIPMENT INCLUDED: x1 HI-CUT pack including: -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit x1 grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 Bdjdpfxjzdfbye Afweg x1 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 x1 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 x1 grinding motor for slot grinding (motor + belt are included) - reference: 144022 x3 grinding tools for slot grinder x1 set of belts for slot grinding motor x1 intermediate plate for alignment of grinding motors - reference: 192940 x1 infinitely adjustable cantilever plate with mounted grinding motor for grinding up to Ø360 [mm] - reference: 144023 x1 adjustable plate, for tilting grinding motors and turbines (up to 16°) - reference: 126148 x1 set of 2 HAUSER 90° angle brackets - reference: 155361 x1 centring microscope - reference: 146318 x1 tool contact detection device - reference: 162334 x20 grinding wheel holders x1 cable for grinding motor Various tools Complete documentation Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The HAUSER S40-400 is a high-precision CNC coordinate grinding machine. This machine excels in tight tolerance environments such as contouring applications in the aerospace, automotive and medical industries. Thanks to its robust design and advanced capabilities, the HAUSER S40-400 is comparable to machines from well-known brands such as Moore. It can be integrated into workshops comprising Mägerle (Magerle), Studer, Moore, Kellenberger, Okamoto, Jones & Shipman, and ELB machines. In addition to its performance, the HAUSER S40-400 integrates perfectly into workshops equipped with lathes, machining centres or CNC milling machines, offering a complete solution for high-precision grinding and machining of complex parts.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Bdedpfotrdyrex Afweg Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: used, machine/vehicle number: 52 / 519, spindle diameter:90 mm x-travel:700 mm distance between columns:900 mm size of table:770 x 900 mm x-Travel:700 mm y-travel:500 mm z-travel:1100 mm Bsdpfxjh Ra Ste Afwodg feed range - table:15 - 280 mm/min rapid traverse Z-axis:530 m/min spindle bore diameter / taper:MT4 (Morse) mm spindle bore diameter:max. 230 mm spindle stroke - max.:170 mm spindle speeds low range:10 U/min spindle speed high range:2000 U/min vertical feeds of spindle head::0.02 - 0,2 mm/r feed steps:6 Main spindle capacity:3 kW total power requirement:4,2 kW weight of the machine ca.:4 t dimensions of the machine ca.:1,9 x 2,2 x 2,4 m Hauser (SIP) High Precision Co-ordinated Jig Boring Machine, Model - M5 Douple Column Design Boring machine Large table (900 x 770 mm) for bulky Objects. All Axis are equipped with Fine Dial for High Presion Boring. A Complete Accesseries and tools are Avilable with the machine ( Drill Bits, Drill Chucks, Multiple Boring heads, Boring Inserts and Bits, Small and large rotary index table for small and big loads).

Condition: used, machine/vehicle number: 208 597, x-travel:400 mm Bdsdpfjcxxuwjx Afwsg y-travel:250 mm workpiece height:500 mm grinding diameter:220 mm table surface area:600 x 320 mm throat:310 mm range of angles:12 ° grinding wheel stroke - vertical:110 mm stroke speeds:0 - 6 m/min grinding spindle speed:max 50.000 U/min peripheral speed:max 35 m/sec workpiece weight:80 kg weight of the machine ca.:2 t dimensions of the machine ca.:1,2 x 1,3 x 2,3 m

Condition: good (used), Year of construction: 1975, Coordinate Grinding Machine Manufacturer: HAUSER Type: 5 SM Year: 1975 with 2-axis digital readout Heidenhain. Table: 750 mm x 620 mm Travel: X 700 mm, Y 500 mm, Z 150 mm Grinding head speeds: 9,000 – 80,000 rpm Total power: 6.3 kW Good condition, in stock. Bdedpfx Afor H Dvdewjg Machine dimensions: 2,500 mm x 1,700 mm x 2,700 mm Weight approx. 5,100 kg. Includes tool cabinet, accessories, and documentation.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 60,000 rpm, Hauser S35-600 fully overhauled in 2025 / 2026 within original accuration end precision Under power in our factory in Switzerland Bedpoy I Nqzefx Afwsdg Equipment: - Grinding spindle 60S ( 9'000 to 60'000 rpm) - Hi-cut cooling system - MSS automatic tool calibration

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Bdedpfx Asflpmqsfwog User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Bdedpofz Dvvofx Afweg User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Bdjdpfxjfzrape Afwsg High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Bjdpefz Ax Ssfx Afwedg ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Bdedpfxjfz A D Nj Afwjg • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Year of construction: 1968, Technical details: x-travel: 400 mm y-travel: 250 mm workpiece height: 500 mm grinding diameter: 220 mm Bdsdpfxovbzwzs Afwog table surface area: 600 x 320 mm throat: 310 mm range of angles: 12 ° grinding wheel stroke - vertical: 110 mm stroke speeds: 0 - 6 m/min grinding spindle speed: bis 50000 U/min peripheral speed: max. 35 m/sec capacity: ca. 7 kVA power capacity: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 3 x 3 x 3 m rotary table d = 300 mm frequency changer *

Condition: used, Field of view on the objective lens at 50x: 11.2 x 9.2 mm Field of view on the objective lens at 100x: 5.6 x 4.6 mm Projection area: 560 x 460 mm Objective table size: 230 x 165 mm Bodpfsb Nxl Iox Afwedg Diameter of the glass table: 80 mm Approximate weight: 230 kg Space requirement: 1030 x 780 x 1800 mm

Year of construction: 2014, operating hours: 20,914 h, condition: used, = More information = Bjdpfx Afjyxkmxowsdg Please contact Tobias Ebert for further details.

Condition: used, mileage: 1 km, power: 5 kW (6.80 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2008, GVW: 1 kg Please contact Emal Jaweed for more information Bdsdpfsyv E Eqox Afwog

Condition: good (used), Coordinate grinding machine Jig grinding machine Brand: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 FAGOR 2-axis height display. Machine Type: Jig Grinding Machine Control Type: Conventional Bdedpfx Afoktkmvoweg X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table top: 600 x 320mm Neckline: 310mm Angle Range: 12° Grinding carriage adjustment - vertical: 110 mm Lifting speeds: 0 - 6 m/min. Grinding spindle speed: max. 50,000rpm Peripheral speed: max. 35m/sec Maximum weight of the piece on the table: 80 kg.

Condition: ready for operation (used), Year of construction: 1991, operating hours: 910 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 4,000 rpm, controller model: TNC 426 / 430, The machine control was renewed in 2004! TECHNICAL DETAILS Travel X-axis: 650 mm Bdjdpfsyrdv Sox Afwjg Travel Y-axis: 450 mm Travel Z-axis: 500 mm Additional travel: 160 mm Spindle diameter: 95 mm Spindle taper: SK 40 Spindle speed range: 25 - 4,000 rpm Table dimensions: 730 x 630 mm MACHINE DETAILS Control: TNC 426 / 430 Total power requirement: 5 kW Dimensions & Weight Space requirement: approx. 4.5 x 3 x 3 m Transport dimensions: approx. 4 loading meters, height: 2.60 m Machine weight: approx. 5,000 kg Operating hours: 3,628 h Program hours: 910 h EQUIPMENT Electronic handwheel Documentation

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Bdodpfeyl U Nvjx Afweg Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Placing a bid obligates the buyer to collect the item promptly between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Work Table Table dimensions: 770 x 630 mm Table load: max. 500 kg Spindle speeds: from 9,000 to 80,000 rpm Bdsdjxqcuvepfx Afwog Feed rates X- and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min Clearance between uprights: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Taper grinding: max. 16° Digital readout X-/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Power: 7 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Tool holders E 19 and F 6 Including matching workshop cabinet with contents Contents include various grinding abrasives High-frequency grinding heads Clamping devices Extraction system Büche ENF 4000

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Bsdpfxox Rw E So Afwsdg Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: not inspected (used), Year of construction: 1987, functionality: unexamined, machine/vehicle number: 2023, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 160,000 rpm, table load: 800 kg, No minimum price – guaranteed sale to the highest bidder! Bdedpsxqfk Tefx Afwog The machine is being auctioned due to a business closure. Bidding obligates the successful bidder to collect the machine within the specified timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis travel: 900 mm Y-axis travel: 600 mm W-axis travel: 635 mm Z-axis travel: 180 mm U-axis travel: 6/20 mm Distance between columns: 950 mm Clearance table to spindle: 735 mm Main spindle diameter: 100 mm Tool holder: E 23 E 19 EF 6 Work Table Table dimensions: 1,020 x 860 mm T-slot width: 14 mm T-slot spacing: 100 mm Table load capacity: max. 800 kg Taper grinding: max. 16° Digital readout X/Y: 0.001 mm Basic deviation X/Y at 20°: 0.004 mm Spindle speed: from 4,500 to 160,000 rpm Planetary movement (Z-axis): 5 to 250 C-axis NC drive: 0 – 5 Feed X and Y-axis feed: 0 to 1,500/3,000 mm/min W-axis feed: 800 mm/min Z-axis feed: 0.5 – 12,000 mm/min MACHINE DETAILS Control: CNC 311 Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Control voltage: 110 V Connection rating: 8.5 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various grinding tools Clamping devices High-frequency grinding head BÜCHE ENF 4000 extraction unit

Condition: not inspected (used), Year of construction: 1984, functionality: unexamined, machine/vehicle number: 0175, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 140 mm, spindle speed (max.): 80,000 rpm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. By placing a bid, you commit to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Distances Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 140 mm Travel W-axis: 500 mm Travel U-axis: 6/20 mm Clearance between columns: 750 mm Clearance from table to spindle: 600 mm Main spindle diameter: 100 mm Work Table Table dimensions: 770 x 630 mm Table load capacity: max. 500 kg Taper grinding: max. 16° Digital readout X/Y-axis: 0.001 mm Positioning accuracy at 20°: 0.004 mm Spindle speed: from 9,000 to 80,000 rpm Feed Feed rates X and Y-axis: 0 – 3,000 mm/min Feed rate W-axis: approx. 800 mm/min Feed rate Z-axis: from 15 to 6,000 mm/min MACHINE DETAILS Control: HAUSER Electrical Data Operating voltage: 3 x 380 V Bodjxqd Htepfx Afwodg Frequency: 50 Hz Control voltage: 110 V Connection: 8 kW Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 3,300 mm Weight: 7,000 kg EQUIPMENT Matching workshop cabinet with contents Various abrasives Selection of high-frequency grinding heads Büche ENF 4000 extraction unit