Used Eppendorf Eppendorf 5804 Benchtop Centrifuge for sale (974)

Condition: good (used), Item: DB-1310-APV-Pump W50/25STD Centrifugal pump Dcjdpetrlrnsfx Agmjk Type: W50/25STD V 380-420, Hz 50, min-1 2860, kW 7.5, A 14.7, cos 0,90 V 660-690 Y, Hz 50, min-1 2860, Kw 7.5, A 6.5, cos 0,90 V 440-480, Hx 60, min-1 3435, kW 8.6, cos 0,92

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Dodpox R U E Asfx Agmeck Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock

Condition: good (used), Year of construction: 2023, Alfa Laval LKH-UP70 Centrifugal pump Serial: 298034 2023, Stainless centrifugal pump, 22Kw motor, 3Ph Dedju N Hz Sjpfx Agmjck

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Djdou N Hybspfx Agmock Serial: 83321 Stainless centrifugal pump, 30Kw motor, 3Ph

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 39398 Stainless centrifugal pump, 30Kw motor, 3Ph Dcsdeu N Hv Nepfx Agmsk

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Dcsdpfxozmdl Is Agmjk Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dsdpfx Agozmdi Temock A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Dsdozmdbvepfx Agmsck

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Dsdpfx Aszmc Riegmjck Drive power 30 kw

Condition: new, Year of construction: 2026, The most powerful centrifugal fan, the FAN5.5, achieves a capacity of up to 7419 m3/h. The design of the new technology line has enabled us to develop the LineWind metal turbine system. This is the most important feature of the radial fans, enabling them to extract all sorts of pollutants with increased vacuum power, thanks to a special blade system that has been profiled at an appropriate angle. The Radial Ventilator can transport air chips sawdust dust and other substances such as smoke or harmless gases. Thanks to its construction and reinforced balanced impeller with many blades, it guarantees stable, quiet and vibration-free operation. The high efficiency of the fan due to the suitable shape of the blades significantly reduces the consumption of electricity without changing its high performance. APPLICATION OF THE FAN production of various types of materials transport to dehumidifiers and drying systems. carpentry - transport of shavings, sawdust, dust agricultural industry - transport of fine granulates, manufacturing - transport of polystyrene granulates, etc. automotive industry - transport of dusty air, impurities Technical parameters: MAX. AIR CAPACITY max. 7419 m3/h inlet diameter 300 mm discharge diameter 250 mm PRESSURE 2014 - 1320 Pa DIMENSIONS 750x750x830 mm MOTOR POWER / VOLTAGE 5.5kW WEIGHT 110kg Dedpfxjvugh Eo Agmock

Condition: new, Year of construction: 2026, CORMAK FAN 11 High-Pressure Material Handling Fan – Premium Industrial Blower for Dust and Sawdust Extraction The CORMAK FAN 11 is a premium industrial high-pressure material handling fan designed for demanding dust extraction and pneumatic conveying applications. Delivering an airflow of up to 15,445 m³/h and powered by an 11 kW three-phase motor, it efficiently removes sawdust, wood chips, dust, and other dry particles generated during the processing of wood, metal, plastics, and composite materials. Its robust construction and high static pressure make it an ideal solution for large-scale industrial dust collection systems. Key Advantages High airflow capacity up to 15,445 m³/h for efficient extraction from multiple machines Powerful 11 kW motor for reliable continuous industrial operation Heavy-duty steel housing resistant to mechanical damage and corrosion Versatile application for sawdust, wood chips, dust, and other dry bulk materials Energy-efficient and low-noise operation optimized for long production cycles Flexible installation options for integration into customized extraction systems Construction and Technology The CORMAK FAN 11 utilizes a high-efficiency centrifugal impeller engineered to generate substantial airflow while maintaining high static pressure. The dynamically balanced impeller provides smooth operation with minimal vibration, while the welded heavy-gauge steel housing ensures excellent durability in demanding industrial environments. Designed for continuous-duty operation, the fan offers long service life with minimal maintenance requirements. Performance and Efficiency A precision-balanced impeller, industrial-grade electric motor, and optimized cooling system enable the FAN 11 to maintain outstanding performance during prolonged operation without overheating. Its high airflow and strong suction pressure make it ideal for extracting sawdust, wood chips, and fine dust from large woodworking machines, centralized collection systems, silos, and automated production lines. Applications The CORMAK FAN 11 is ideal for: Woodworking shops and furniture manufacturing plants Metalworking, plastics, and chemical processing industries Agricultural storage facilities and grain drying installations Automated production lines with centralized dust extraction Pneumatic conveying systems for dry industrial materials Standard Equipment Complete centrifugal fan assembly with 11 kW motor Heavy-duty steel housing with inlet and outlet flanges Industrial centrifugal impeller designed for continuous operation Optional Equipment Inlet and outlet diameter reducers Installation and mounting kits Cyclone separators and filtration systems Technical Specifications Parameter Value Maximum Airflow 15,445 m³/h Inlet Diameter 350 mm Outlet Diameter 350 mm Static Pressure 3187–2019 Pa Dsdpfxovugfwe Agmock Motor Power 11 kW Power Supply 400 V Dimensions (L × W × H) 920 × 1050 × 1060 mm Weight 170 kg

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Dcodpovugrdefx Agmok Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: used, Year of construction: 1987, Compressor Make : Ingersol Rand Type : Centac C60Mx2 Centrifugal Original YOC : 1987 Our supplier bought the mc in 1997, fully reconditioned from Ingersol Rand in Belgium , only used for 2 years in 1 shift, thereafter serviced & stored . User was Picanol demo project in Belgium. See below pictures to see condition & completeness of the unit. Air dryer Hiross MDA65 is included in the package. Dcedpfoy Spnuox Agmok Intake Pressure : 98 kPa Intake Temperature : 15 °C Relative Humidity : 60% Delivered Capacity : 61 m3/min Discharge Pressure : 800 kPa Cooling water temp : 15 °C Cooling water flow : 450 l/min Rated speed : 2970 n/min Motor rating : 430 kW

Condition: good (used), Filling capacity: 35 kg. Dcedpfx Asgl Auxegmsk

Condition: not inspected (used), Manufacturer: STORK capacity: 375m3/h motor: 90 kW Dcodpfx Agjm Twrzjmsk

Condition: not inspected (used), Manufacturer: Stork Capacity: 660 m3/h Dsdpfx Agjm Uc R Usmock Engine: 160 kW

Condition: ready for operation (used), The robot is used for dispensing pastes or liquids in a targeted or arbitrary manner. Dcodpfx Aohx Nh Rogmek

Condition: good (used), Year of construction: 1998, functionality: fully functional, 1 x Centrifuge Steimel C 3 Year of manufacture: 1998 with lockable lid and conical basket. The machine is in technically perfect condition. Dodpfxezkyp Re Agmock Technical data: Max. load: 50 kg / 20 l Speed: 1,000 rpm The machine can be inspected while powered on.

Condition: used, Used Rousselet model RC30VXR hastelloy C22 basket centrifuge. Unit includes (1) 300mm diameter x 150mm deep hastelloy C22 perforated basket, 5 litre capacity & 0.14sqmt filtration area. (1) 200mm diameter x 110mm deep hastelloy C22 perforated basket, 2 litre capacity & 0.06sqmt filtration area, maximum 1000 G-force. Maximum load of 6kgs. Maximum 3000rpm. Includes main drive and controls. Unit is mounted on stainless steel mobile trolley. Weight: Estimated: Kg600.0 Djdpfx Agszfiguemsck Dimensions: 950mm X 1450mm

Condition: used, input voltage: 400 V, input frequency: 50 Hz, cooling capacity: 5.5 kW (7.48 HP), immersion depth: 460 mm, Equipment: type plate available, Spandau Pump, SKF Lubrication Systems Germany GmbH Submersible centrifugal pump, submersible pump, coolant submersible pump, centrifugal pump unit, immersion pump TYPE PSL0303GBS460N05BA Immersion depth: 460 mm, 400 V, 50 Hz Delta connection 5.5 kW IE2 Tmax 80°C Qmax 1200 l/min, Hmax 49 m Weight 80 kg The coolant pump is used and was mounted on a filter system. The nameplate on the centrifugal pump states "Made in Germany". Dodew Rvhdjpfx Agmeck Price negotiable. Our asking price is €1,880 net, ex works, plus packaging costs. All technical data is subject to printing errors and errors. We only sell to countries within the European Community.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark Metal Analyzer Analysis: Tabletop spectrometer with PC, monitor, and software Thermo Scientific OXSAS 2.7 Software OXSAS is the most advanced software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of datasets using fill-down and increment-down tools. OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables you to meet all your requirements. Technical machine description: Condition: fully functional Dcsdpfx Aoziar Negmok In like-new condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized facilities and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods, and other industries. The device is characterized by particularly high resolution thanks to a unique optical system based on a multi-grid/CCD (charge-coupled device) system. Other advantages of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace amounts to percentages, in all metallic solid samples A groundbreaking spark excitation and optical design to ensure the best performance in its class An intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both new users in production and experienced laboratory staff The device is also ideally suited for other areas, such as metal recycling, academic and non-academic laboratories, and primary metal producers, where a cost-effective solution is needed for the analysis of metal products and materials for quality assurance and process control, or a second device is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. W x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1994, Overview  The Centrifugal Separator Type SB80-06-076 from the manufacturer GEA Westfalia was previously used at a brewery in Estonia. Due to a complete shutdown of the production plant, this unit is for sale. Till closing of the factory, the separator was used frequently. Tech Specs  - 4500 rpm Dodpsv N Hcxefx Agmock - with self cleaning drum Accessories  - Spare Parts - Tools

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: P13.19W3479.01, MAYFRAN CENTRIFUGE VBU 300 400V/50Hz 0.55kW 1.29A Inlet diameter 400mm Equipped with SEW Motor DRN80MK4, manufactured in 2019, and a speed inductive sensor. The machine is almost unused, with original paint and no signs of wear. Complete with steel frame, RAL 5010 color. Fully operational machine, requiring only wiring. Available for testing. Frame dimensions: 1580x560x1680 (WxLxH) Footprint dimensions: 1580x680x1680 (WxLxH) Centrifuge inlet height from the ground: 2300, inlet diameter 400, equipped with a steel protection net. Outlet diameter: 200mm - Current height approx. 1000 - Maximum height approx. 1465 Dcedpfx Aszky Awsgmjk

Condition: excellent (used), functionality: fully functional, Alfa Laval Centrifuge (Whey Skimming) Dcodpew Dgaxefx Agmok Used centrifuge for whey skimming Manufacturer: Alfa Laval Machine number: 31829-02912 Application: whey skimming Overall dimensions: 1700 mm (L) x 1850 mm (W) x 1830 mm (H)

Year of construction: 2026, condition: new, functionality: fully functional, For sale: new Juneng DHZ360 self-cleaning disc stack centrifuge / separator. Manufacturer: Juneng Model: DHZ360 Type: disc stack centrifuge / centrifugal separator Condition: new / unused Seller: Leonagra s.r.o., EU company EU invoice possible Delivery to Slovakia / EU can be arranged The Juneng DHZ360 is an automatic disc stack centrifuge designed for high-speed centrifugal separation of liquids and fine solids. The machine is equipped with automatic cleaning and solids / sludge discharge, making it suitable for continuous industrial process applications. Technical specifications: Model: DHZ360 Drum diameter: 360 mm Rotary speed: 7,000 rpm Separation factor: 9,000 Motor: Y132M-4-B5 Motor power: 7.5 kW Dimensions L × W × H: 1,495 × 1,130 × 1,485 mm Weight: approx. 1,200 kg Automation: automatic cleaning and automatic solids / sludge discharge Typical applications: vegetable oil clarification edible oil processing oil-water-solid separation degumming / refinery process liquids industrial liquid clarification food and beverage process liquids fine chemical process liquids removal of fine suspended solids from liquids The DHZ360 can be integrated into existing process lines where continuous separation, clarification or polishing of process liquids is required. Final technical suitability should be confirmed according to the buyer’s product, viscosity, temperature, solid content, density difference and required separation result. The machine is offered as new equipment supplied through an EU seller. Final configuration, delivery time and documentation can be confirmed before order. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: neue Juneng DHZ360 selbstreinigende Tellerzentrifuge / Separator. Hersteller: Juneng Modell: DHZ360 Typ: Tellerzentrifuge / Zentrifugalseparator Zustand: neu / unbenutzt EU-Verkäufer: Leonagra s.r.o. EU-Rechnung möglich Lieferung in die Slowakei / EU kann organisiert werden Die Juneng DHZ360 ist eine automatische Tellerzentrifuge zur Hochgeschwindigkeits-Trennung und Klärung von Flüssigkeiten mit feinen Feststoffen. Die Maschine verfügt über automatische Reinigung und automatischen Feststoff- / Schlamm-Austrag und ist daher für kontinuierliche industrielle Prozessanwendungen geeignet. Technische Daten: Modell: DHZ360 Trommeldurchmesser: 360 mm Drehzahl: 7.000 U/min Trennfaktor: 9.000 Motor: Y132M-4-B5 Motorleistung: 7,5 kW Abmessungen L × B × H: 1.495 × 1.130 × 1.485 mm Gewicht: ca. 1.200 kg Automatisierung: automatische Reinigung und automatischer Feststoff- / Schlamm-Austrag Typische Anwendungen: Pflanzenölklärung Speiseölverarbeitung Öl-Wasser-Feststoff-Trennung Prozessflüssigkeiten in Raffination / Degumming industrielle Flüssigkeitsklärung Dcodpszlhdxjfx Agmjk Lebensmittel- und Getränkeindustrie Feinchemie Entfernung feiner Schwebstoffe aus Flüssigkeiten Die technische Eignung muss je nach Produkt, Viskosität, Temperatur, Feststoffgehalt, Dichteunterschied und gewünschtem Trennergebnis final bestätigt werden. Die Maschine wird als neue Ausrüstung über einen EU-Verkäufer angeboten. Endkonfiguration, Lieferzeit und Dokumentation können vor Bestellung bestätigt werden. Herstellerfotos, technische Unterlagen und Videobestätigung auf Anfrage verfügbar. Preis: FCA / Lieferung EU nach Vereinbarung, zzgl. MwSt.