Used Extraction / Chip Extractor for sale (9,156)

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h Knodevt R Akepfx Ahiec -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h Kjdpfjz Trrhsx Ahienc New filter cartridges installed in the unit. Stock number: 1029

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 230,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Knjdpfx Aszhbqqohiec

Condition: used, Year of construction: 1997, Design of intake manifold: left Diameter of intake manifold: 250 mm Nominal volumetric flow rate: 4241 m³/h Filter area: 23 m² Cleaning: vibrating motor Fire extinguishing system: dry water line Chip disposal: briquetting press Filter material: polyester needle felt Kjdpfx Ao Aaq Rbohionc Negative pressure at Vnominal: 2750 Pa Installation: stationary Motor power: 5.5 kW Sold on behalf of the owner, located in Darmstadt. Storage location: Customer

Condition: used, Year of construction: 2001, functionality: fully functional, type of input current: three-phase, filter area: 16.5 m², suction capacity: 2,400 m³/h, Equipment: type plate available, Dust extraction unit, Donaldson Torit brand, vacuum filter, dust collector for extracting metal, mineral, and hard fiber dust, and for effectively collecting process dust. Kodoy Sz Dnepfx Ahienc Donaldson Torit Vibra Shake is a self-cleaning dust extraction unit for intermittent applications where high collection efficiency is important, e.g., recovery of precious metals. Two-stage filter cartridge for high-performance filtration of both coarse and fine dust. The filter screen captures coarse and fibrous particles. The vacuum fan is located behind the filter on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit Model: VS 1500 (Vibra Shake) Fan power: 3 kW Capacity: 2400 m3/h Filtration area: 16.5 m2 Inlet diameter: 180 mm Stock number: 1140

Condition: excellent (used), Year of construction: 2018, Only a few running hours. The table must be connected to a external dust extractor. Kedpfxow T Sicj Ahisnc We ship all over EU.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230 Dust Extractor with Dust Filter The CORMAK FM230 with a dust filter is a compact, mobile, professional-grade dust extractor designed for the efficient removal of wood chips, dust, and sawdust in woodworking workshops. Thanks to the use of a dust filter, the machine provides not only high suction performance but also improved filtration efficiency, significantly enhancing air quality in the workplace. Main Advantages of the Machine Extraction capacity of 1,000 m³/h – ideal for use with low- and medium-powered woodworking machines. Dust filter – effectively captures small particles, including fine sanding dust. 0.75 kW / 230 V motor – quiet, energy-efficient operation without the need for a three-phase power connection. Mobility – four castor wheels allow the extractor to be easily moved around the workshop. Compact design – the machine takes up little space, making it an ideal choice for small workshops. Construction and Technology Knodpfoz A Ut Eex Ahioc The machine is equipped with a metal sawdust fan, ensuring a long service life and reliable operation. The high-quality dust filter efficiently separates dust particles from the airflow, helping to reduce airborne dust in the workshop. The robust powder-coated housing protects the internal mechanisms, while the sealed suction system prevents pressure losses. Precision and Operating Efficiency The CORMAK FM230 woodworking dust extractor provides stable and consistent suction. An extraction capacity of 1,000 m³/h combined with a low-power motor enables efficient operation with a single woodworking machine without interrupting the work process. Thanks to its fine-particle filter, it is also an excellent dust extractor for fine dust generated during wood sanding. Applications Small and medium-sized woodworking workshops Craft and production facilities Technical schools and educational workshops Hobby woodworking workshops The FM230 is ideally suited for use with: milling machines, planers, jointers, belt sanders, thickness planers. Standard Equipment Dust filter Waste collection bag Castor wheels with brakes Bag fastening clamp Optional Equipment Ø100 mm extraction hose Suction outlet reducers Additional set of filter bags Technical Specifications Specification Value Motor power 0.75 kW Extraction capacity [m³/h] 1,000 Negative pressure 1,800 Pa Noise level 70 dB Negative pressure 1,020 Pa Noise level 70 dB Bag capacity 60 l Number of bags 2 (filter + waste collection) Extraction outlet diameter 100 mm Dimensions (H x W x L) 1,500 × 420 × 600 mm Power supply 230 V Weight 27 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Filter cleaned pneumatically with compressed air (manually). Knedpfez R Shljx Ahisc Model: Flex-22 Year of manufacture: 2018 Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Knedpfxsxxh Tae Ahiec Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Knedpfx Aey T Iyrehiec Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: used, Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Motor: EMK type EC2-HS160M2-2 -Engine power: 15 kW / 2935 rpm -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Base plate: 580 x 470 mm -Total dimensions: 930/820/H1220 mm Ksdpfx Ahsrh Niaoisnc -Weight: 395 kg

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Kedsxup Aujpfx Ahienc Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: good (used), Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan Kjdpfx Asb Ig Ugshionc -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Condition: new, Year of construction: 2023, power: 7.5 kW (10.20 HP), intake manifold diameter: 300 mm, Exhibition machine, year of manufacture 2023 Technical data DM-300/P-B Kjdpfx Asz At Nhehienc Motor power 7.5 kW Nominal volume flow 20 m/s, 5089 m³/h Max. air volume flow 6000 m³/h 2700 Pa at 20.5 m/s in dusty conditions Filter area 31.8 m² Filter cleaning: JET cleaning system Residual dust content: less than 0.1 mg/m³ Dust collection volume: 480 liters Sound pressure level: 70 dB(A) Power supply: 400V/50Hz Nominal current: 14.0 [A] 5 m connection cable with 32A CEE plug, 5-pole, with phase inverter Weight: approx. 780 kg Dimensions (L x W x H), max. 3245 x 1030 x 2595 mm Includes extraction nozzle Extraction nozzle with flange, 300 mm (left) With extinguishing system (no water connection required)

Condition: new, Ball bearing removal/extraction tool 24, clamping width 60-90mm, 24-A in 2x L-Boxx, KUKKO · Complete set · Includes internal extractors and counter supports, as well as two-arm universal extractors. Application: universally applicable, for removing ball bearings, bearings, gears, shoulder bearing inner rings, deep groove ball bearings, etc. · Also suitable for extracting tightly fitted ball bearings, ball bearing outer rings, and bushings. * The items each consist of 2 cases. · Supplied in a sturdy "L-BOXX". · Other technical features: Contents: 6 internal extractors 12 - 46 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 puller chuck, 1 battery terminal puller 55 mm, 1 two-arm puller 80 mm Kneds Ab Ixxepfx Ahiec · Packaging: in 2 x L-Boxx Contents: 6 internal extractors 12 - 46 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 puller chuck, 1 battery terminal puller 55 mm, 1 two-arm puller 80 mm.

Condition: used, This listing is for 1 of 2 Horizon SPE-DEX 4790 Extractor Knedpfx Aexzhtlshiec SPE-DEX 4790 is the only extractor system ever designed to handle both clean and particulate laden environmental samples such as: Ground water Waste water Drinking water Solid-waste water Process water (influent and effluent) Fresh and sea water The SPE-DEX 4790 Extraction System features: Bench-top operation freeing up valuable hood space Modularity for up to (8) extractors to be connected simultaneously to one PC Interchangeable 47 mm and 90 mm SPE disk holders Automatic sample bottle rinse (3)different solvents 5-Conditioning solvents Prewritten validated methods included Uses original sample bottle

Condition: new, Ball bearing removal/extraction tool 24, clamping range 60-160mm, 24-B in 2x L-Boxx, KUKKO · Complete set · Includes internal extractors and counter supports, as well as two-arm universal extractors. Application: universally applicable for removing ball bearings, bearings, gears, shoulder bearing inner rings, and deep groove ball bearings, etc. · Also suitable for removing tightly fitted ball bearings, ball bearing outer rings and bushings. * Each item consists of 2 cases. · Supplied in a robust “L-BOXX”. · Other technical features: Contents: 8 internal extractors 12 - 70 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 extractor sleeve, 1 battery terminal extractor 55 mm, 2 two-arm extractors 80 and 160 mm. · Packaging: in 2 x L-Boxx Contents: 8 internal extractors 12 - 70 mm, 2 counter supports 5 - 40 mm and 18 - 70 mm, 1 extractor sleeve, 1 battery terminal extractor 55 mm, 2 two-arm extractors 80 and 160 mm. Kedo Ab Ix Eopfx Ahijnc

Condition: excellent (used), POLYCITRUS FRATELLI INDELICATO ZX2 Industrial Extractor – Stainless Steel POLYCITRUS FRATELLI INDELICATO ZX2 industrial extractor, designed for the continuous extraction and separation of juice and pulp in the industrial processing of citrus fruits and other compatible fruits. The equipment features a large upper feed hopper and a horizontal processing chamber, where the product undergoes a mechanical action that allows for the extraction of the usable fraction and its separation from peels, seeds, fibers, and other solid residues, depending on the product and the installed configuration. Its construction, primarily in stainless steel, and its robust design allow it to be incorporated into industrial lines for the production of juices, pulps, and fruit derivatives. MAIN FEATURES -Manufacturer: FRATELLI INDELICATO -Designation: POLYCITRUS -Model: ZX2 -Type: Industrial fruit / citrus extractor -Continuous operation -Upper feed hopper -Horizontal extraction chamber -Mechanical extraction and separation system -Separation of liquid / pulpy fraction and solid residues -Differentiated discharges according to configuration -Driven by an electric motor -Construction primarily in stainless steel -Enclosure of the moving elements -Robust industrial structure -Access to the processing chamber for cleaning and maintenance -Suitable for integration into fruit processing lines PROCESS The fruit or raw material, previously prepared, is fed through the upper hopper and passes into the extraction chamber. Kodszxwyvspfx Ahisnc Inside, the mechanical system exerts the necessary action to break, press, and/or separate the product, allowing the recovery of juice, pulp, or a combination of both, depending on the product being processed and the internal elements installed. During the process, undesired fractions, such as peels, seeds, and fibrous material, are separated and evacuated independently of the usable product. The resulting product can then be sent to: Refiners / finishers Screens Buffer tanks Centrifuges Homogenizers Pasteurizers Sterilizers Evaporators / concentrators Aseptic tanks Filling lines APPLICATIONS Particularly suitable for fruit processing industries, juice, pulp, fruit base, and citrus derivative manufacturers. Depending on the installed extraction elements and the prior preparation of the raw material, it can be used in different extraction, separation, and recovery processes for the usable fraction of the fruit. The POLYCITRUS FRATELLI INDELICATO ZX2 provides a robust solution for incorporating a continuous mechanical extraction stage into industrial fruit processing lines. Machine available for inspection. Additional technical information, production capacity, internal configuration, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: fully functional, Selling 2 absolute filtration air extractors for use in asbestos-contaminated environments: - EOLE2000 (Extramiante brand) - NPU2500 (SMH brand) In perfect working order. Information and photos available upon request. Ksdpfxsz Ru Nqe Ahisnc Technical data sheets attached. Equipment has been used in asbestos-contaminated environments => Asbestos certification required. Unit price: €1200 (excluding VAT) Price for the set: €2000 (excluding VAT)

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. Kedpfxe Aazd Eo Ahisnc *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: not inspected (used), Year of construction: 1995, Connected load 380V 2.2kW Intake nozzle 200 mm mobile Ksdsvz Uhyspfx Ahisnc 2x chip bins á 190l Volume flow 2500 m³/h HxWxD: 2160 x 830 x 1900 mm

Condition: excellent (used), Servatechnik extraction Kjdpfsx Nbnnox Ahisnc

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, Ksdpfx Asyi Efcshijnc including frequency inverter workshop tested

Condition: used, Year of construction: 2012, type of input current: three-phase, input voltage: 400 V, total width: 1,150 mm, total length: 2,150 mm, total height: 4,300 mm, filter area: 286 m², suction capacity: 16,000 m³/h, input frequency: 50 Hz, Dust extraction system, fume extraction for welding, self-cleaning cartridge filter, pneumatic, under-pressure system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFO4-16 Year of manufacture: 2012 Cartridge filter inserts, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 22 kW Fan model: ART 632/N4 Knodsz Nx S Topfx Ahijc Capacity: 16,000 m3/h Noise silencer included. We also offer new filter inserts on request, tailored to the intended use of the equipment. Stock number: 0018

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Ksdpfx Ahjz N Am Ueisnc Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173