Used Eyan Chamfering for sale (365)

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, Redpfx Aisy H Hzbezot - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: used, Year of construction: 2011, pressure 36 t chamfer lenght 1020 mm distance between columns 932 mm throat 150 mm stroke 120 mm useable dayligth 295 mm Y-working travel 10/25 mm/sec Rodpjy Ig Rrjfx Aizet Y-rapid travel 220 mm/sec work height max. 1150 mm weight of the machine ca. 2.600 kg dimensions of the machine ca. 1805x1330x2380 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg Rjdpfx Aiswv Uq Ajzjt - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm Rjdpfxjuxc Dhe Aizjt

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm Redpfx Aow S I Dgeizot E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: used, Year of construction: 2020, Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp, Loading system including 2 loading mandrels Ø 32 mm, Oil conversion including aerosol extinguishing generator and oil conversion kit, Control cabinet cooling unit, Automatic central lubrication, Marx VTG 0.32 electrostatic mist extractor, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit, Software for all standard curved and pointed teeth, Signal light to indicate operating status, Automatic switching of peripheral speed between CBN and DIA grinding wheels, F-1477 saw blade holder for saws, Various spacers for 32, 40, and 50 mm mandrels, Oil collecting pan. Saw diameter max: (40) 130 - 850 mm Saw diameter (unmanned): (75) 130-520 mm Tooth pitch: 1 - 40 mm Tooth height: max. 17 mm Number of teeth: 2 - 998 Saw blade thickness: up to 8 mm Loading capacity: 40 saw blades Grinding wheel diameter: (CBN or DIA - 14F1) Ø 200 mm Grinding wheel bore: 32 mm Rodpfx Aoyvgc Nsizet Coolant pressure: 6 bar Coolant tank: approx. 300 L Drive power grinding motor: 3 kW Connected load approx.: 6.5 kW (400 V / 50 Hz) 8.9 kVA Weight approx: 2000 kg Dimensions W x D x H approx.: 2400 x 1700 x 2200 mm colour: Grey

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Rjdpfx Aiew I Sk Nszjt Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Rsdpfx Ajuxczaoizet Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: used, Year of construction: 1999, pressure 200 t chamfer lenght 4100 mm Control CYBELEC DNC 900 stroke 260 mm weight of the machine ca. 16.000 kg dimensions of the machine ca. 4500x2400x3000 mm Redpfxsy H N Iwo Aizst

Condition: used, Year of construction: 1992, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm control LVD MNC 95/C Rodpfsy H N Iqsx Aizot stroke 200 mm total power requirement 11 kW weight of the machine ca. 9.500 kg

Year of construction: 2011, condition: excellent (used), Incoming next days Rodpfx Ajy Hcagjizet 4-spindle deburring and chamfering machine Inside and outside deburring of roubd material Spindle speeds 70/140 rpm Original pictures follow

Condition: used, Year of construction: 2013, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm Control CYBELEC ModEva 10 S column arm 405 mm stroke of ram 400 mm distance between table / ram 320-720 mm feed down max. 220 mm/sec feed bending max. 10 mm/sec feed up max. 220 mm/sec connected load 27 kVA total power requirement 18,5 kW weight of the machine ca. 13.600 kg dimensions of the machine ca. 4200x2000x3000 mm Equipment / Features: - Crowning - 2 pcs. support arms - Laser safety system - Side safety doors - CNC control Cybelec Modeva 10 S - Die shifting - Pneumatic upper and lower tool clamping - Two-hand / foot pedal operation - Controlled axes: Y1, Y2, X, R, Z1, Z2 Rodpfjy Hl Iaex Aizjt

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Rodpfx Ajvvkd Teizot Storage location: Nattheim

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller manufacturer: Fanuc, overall weight: 12,000 kg, Special Equipment for the Machine: - 1 Extension of the tool magazine from the standard 30 tools to 210 tools, including preparation for 240 tools - 1 Pallet rotary storage system for 10 pallets, including setup station - Number of pallets: 10 - Pallet diameter: 130 mm - Pallet mounting: Capto C6 - Maximum workpiece size: Ø 250 x H 250 mm - Maximum workpiece weight: 40 kg - Pallet clamping force: 22.5 kN - 1 HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor - Maximum spindle torque: 70 Nm up to 1,500 rpm - Including weekly timer for initiating spindle warm-up cycle and automatic machine shutdown - 1 Spindle holder HSK 63A - 1 Direct path measuring system (Heidenhain) on X, Y, and Z axes, equipped with purge air - 1 KNOLL coolant system, consisting of: - Scraper-belt chip conveyor with lift pump, chip discharge to operator side - Coolant supply through the spindle with KTS25-50T pump, capacity 24 l/min at 70 bar, 5.5 kW - Coolant pressure adjustable in 3 stages - External coolant with coolant pump, capacity 100 l/min at 1.4 bar - Coolant shower with coolant pump, capacity 100 l/min at 1.4 bar - Compact filter KF200, filtering capacity 200 l/min - Dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m - Tank capacity: approx. 1,400 liters Rodpfxey Hrtcj Aizst - 1 Cooling water recooler VWK 90 – D emulsion - Cooling capacity: 11.5 kW - Ambient temperature up to 42°C - Refrigerant: R407c - 1 Coolant spray gun in the working area, including pump and electrical installation - 2 Spiral screw conveyors - 1 TEBARON mechanical air filter TEB/BV2 for extraction of emulsion mist, oil mist, and smoke, consisting of: - 3-stage pre-filter pack - HEPA filter per DIN EN 60335-2-69 with BIA test certificate, separation efficiency >99.995% for particles ≥ 0.3μ - Meets category K1/K2 (carcinogenic substances and pathogens) and dust class H requirements - 1 Single support with base plate for ISI air filter TEB/BV2 - 1 RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, insertable into spindle via tool changer - Includes EASY PROBE SOFTWARE - Pressure gauge for tool length measurement and tool breakage monitoring Special Equipment for the Control: - 1 Increase in part coordinate systems from 6 to 54 - 1 Coordinate system rotation G68/G69 - 1 Chamfering and rounding of corners - 1 Automatic reference point transfer - 1 Resume contouring function - 1 Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 - 1 IZ2/150NF HSC precision controller for simultaneous 5-axis machining, including: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero-point transfer, up to 8 different zero points available (G54.2) - TCPC Tool Center Point Control for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined work plane (G68.2/G53.1/G69)

Condition: good (used), functionality: fully functional, WSM workshop drawer cabinet combination with contents - consisting of a swing-door cabinet and a workshop drawer cabinet Contents include: various cutter heads, carbide reamers, carbide drills, thread taps, twist drills, plug gauges, various drill and chamfer milling cutters, deep hole drills, solid drills, micrometers, and miscellaneous measuring instruments Overall dimensions: 730 x 700 x 2400 mm Weight: 700 kg Note: The item must be definitively collected between May 5 and May 7, 2026, on a date to be coordinated. FCA D-74385 Pleidelsheim – loaded onto truck Rsdpfx Aioyuvlkozjt

Condition: used, Year of construction: 1998, Technical details: x-travel: 630 mm Redpfxjy Er Tgj Aizjt y-travel: 600 mm z-travel: 650 mm control: MSC 502 (Fanuc 16) Spindle RPM: 12000 1/min spindle drive: 22 / 18,5 kW rapid travel x/y/z: 32 m/min Pallet dimension: 500x500 mm numbers of pallets: 2 table load: 0,5 t working diameter: max. 610 mm Number of tool station: 60 BT40 max. tool length: 360 mm max. tool weight: 12 kg tool changing time: 1,3 sec B-axis positioning (non continuous): 1 total power requirement: 50 kVA weight of the machine ca.: 14 t dimensions of the machine ca.: 3,3 x 5,8 x 3,2 m Accerories Chip conveyor spindle load monitor Typ C Coolant gun Chamfering and corner rounding Tool life management Interface for coolant through the spindle This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface, *

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited Rjdoy Ehrfepfx Aizjt No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: excellent (used), Year of construction: 2020, For inquiries: Zoltán Utasi +36 30 205 7380 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Redpfx Aioxayvpezet Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: used, Year of construction: 2003, pressure 50 t Rsdpfx Aiey D T Tljzst chamfer lenght 1550 mm distance between columns 1150 mm Control CYBELEC DNC 1200 PS Eco column arm 405 mm table height 900 mm stroke of ram 400 mm distance between table / ram 720 mm total power requirement 9,5 kW weight of the machine ca. 5.200 kg dimensions of the machine ca. 2000x1900x2920 mm Accessories/Equipment: - CYBELEC DNC 1200 PS Eco controller - 2 support arms - 4 stop fingers - Lasersafe - Foot switch

Condition: used, Year of construction: 2018, pressure 170 t chamfer lenght 3050 mm distance between columns 2550 mm stroke 400 mm weight of the machine ca. 15.300 kg Machine: - Sturdy machine frame - Press beam - Spherical bearing for the press beam with press beam tilt - Electro-hydraulic top drive - Block hydraulic system - Length measuring system (Y-axis) with dynamic spring compensation - Control cabinet air conditioning unit - Adapter strip for tool mounting - 2 stop fingers Redpfx Aisy D T Tfozet Optional equipment: - 2-axis backgauge (XM/XS, R) - 1 sheet metal holding device 200 daN CNC - 2 x additional stop fingers 2/4-axis - 1 x pneumatic upper tool clamping 26 mm - 1 x pneumatic lower tool clamping 55 mm - 1 x lower tool shift EHT pneumatic - 1 x CNC crowning device 3000 kN/m - 1 x Operator Safety Guard PILZ PSENvip Productive - 2 x Bending aid 1500 N - 1 x Support strips for bending aid - 1 x Parking position right, short - 1 x Special function: fast folding

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves Rjdpey D T S Ijfx Aizot - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 1 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW OPEN-TOP HOOKABLE CONTAINER FOR AGGREGATE WITH A SQUARE TANK WITHOUT CHAMFERING, REAR OPENING WITH DOOR AND TILTING WITH 200 MM BEAMS AND SUPPORTED FLOOR, REINFORCEMENT IN THE FRONT PART AT THE YIELDING POINT, 55 MM HOOK REF: 24-N-35 TYPE: for aggregates C NEW: yes LID: no OPENING: rear door and tilt OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.00 m INTERNAL / EXTERNAL WIDTH OF THE BODY: 2.35 m / 2.55 m INTERNAL / EXTERNAL FRONT SIDE: 1.50 m / 1.70 m INTERIOR / EXTERIOR REAR TAILGATE: 1.00 m / 1.20 m INTERIOR / EXTERIOR SIDE TAILGATE: 0.80 m / 1.00 m MC: 12 WEIGHT: 1860 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green ral 6029Errors and/or omissions excepted The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. Rodpfx Aievucmwszot For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialized in trucks, trailers and hook lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application Rsdpfx Aijy Av A Hszjt - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit - Buffing unit

Condition: used, Year of construction: 2004, total height: 2,100 mm, total length: 7,400 mm, total width: 1,100 mm, overall weight: 3,200 kg, Equipment: CE marking, No. 3267 Edgebander / edge banding machine Brandt KDF 680 Used, year of construction 2004 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 12 mm Control system Brandt Power Control PC 16 Joint milling unit Gluing unit Quickmelt Combination milling unit for flush milling, chamfer milling, radius milling Trimming unit automatically adjustable from chamfer trimming to straight trimming via program Rounding unit (front side) Profile scraper unit / Rounding scraper unit Surface scraper unit Buffing unit for polishing edges Release agent spray system Special equipment: Hot-air system Schugoma HDL3020 (retrofitted) Hot-air process for processing laser edges (co-extruded edge) to create a visually seamless joint Transport dimensions approx. 7400 x 1100 x 2100 mm LWH Weight approx. 3200 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location Rodpfoy Df N Sox Aizjt

Condition: used, Year of construction: 1983, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm Center of spindle to wall or column 400 mm stroke 280 mm Rsdpfx Aijy Dvmhozjt total power requirement 15 kW machine weight ab. 12.000 kg