Used Fab. Hofmann Channel Baling Press for sale (13,554)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Gsdpfx Alsyz Af Esmjbl Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 290/02, functionality: fully functional, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 Gbedpfx Aleyghhhomjl • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Gbedpfev Akmzjx Almsl Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Year of construction: 2008, condition: good (used), Horizontal baling press Build in 2008 Bale size 800x1000x1400 Loading height 1250mm Gbodpfxog Ibt Ne Almsl

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Gjdpfsyyy Dpsx Almebl Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes Gjdpfsh Dy Rfex Almjbl 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Gbodpfxsic Rl Do Almol Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, Equipment: documentation/manual, DIXI 60 SLD horizontal press baler 2012 year of production Press checked by service / new hydraulic cylinder installed. Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Gbodjyw Hz Nspfx Almel Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Gbjdoyub Drjpfx Almol Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, Year of construction: 1986, functionality: fully functional, AUTEFA Bale Press LIFT BOX - semi-automatic bale press - 2-chamber system - pre-press - final press - automatic TITAN strapping machine - control unit renewed in 2015 - hydraulics completely renewed in 2018 - condenser new in 2012 - fork bale removal trolley - transport segments (roller conveyors) Gbodpfx Aeytb Sgolmsl - turntable - roller conveyor scale - roller conveyor lift table - packaging material - bale size WxLxH 1250x750x1100 mm - bale weight approx. 330 kg - daily throughput 25-30 t System available 2x (price per unit) Please note that disassembly, packing, and shipping/collection must be carried out by the buyer.

Condition: good (used), Year of construction: 2012, The pre-shredder (upper section) is not included in the offer. Only the lower part is offered. Paper baler / baling press PRESTO CC 40 V Manufacturer: PRESTO GmbH & Co. KG Machine type: CC 40 V Machine number: 28074 Year of manufacture: 2012 Empty weight: 4,200 kg Max. operating pressure: 260 bar Protection class: IP55 Rated current: 30 A Rated voltage: 400 V, 50 Hz Rated output: 15 kW Gedpfjyrt T Tex Almebl Electrical connection: 35 A gG Machine type: horizontal baling press for paper and cardboard

Condition: good (used), Year of construction: 2005, operating hours: 15,606 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, power: 30 kW (40.79 HP), volume flow: 160 m³/h, Good day, We hereby offer you, without obligation, a used baler manufactured by Presto GmbH & Co. KG, model HPK 50 B. Gjdeyplwfepfx Almebl The following technical data have been taken from the manufacturer's operating manual and brochures, for which we assume no liability for accuracy or completeness. Manufacturer: Presto GmbH & Co. KG Model: HPK 50 B Year of manufacture: 2005 Operating hours: 15,606 hours Main press force: 50 t Drive power: 30 kW Total connected load: 31.5 kW Rated current: 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm: approx. 6.7 t/hour Machine weight (press): 12.5 t Note: The machine has been repaired in our workshop (the main control valve on the hydraulic block was replaced) and tested during ongoing operation in both manual and automatic modes. Machine documentation is available in German. Viewing of the press can be arranged by appointment in our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 630213235, The machine is in like-new condition! The technical data is provided by the manufacturer. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Press force: 594 kN / 60 t Specific pressing force: 45 N/cm² Cycle time in idle mode: 25 s Idle press capacity (theoretical): 32.5 m³/h Filling height: 1,115 mm Feed opening dimensions: 1,195 x 650 mm Bale dimensions: 1,200 x 1,200 x 1,100 mm Max. bale weight: 550 kg Material to be pressed: Film, mixed paper, cardboard, punching waste MACHINE DETAILS Gjdpeyqw Sqofx Almobl Drive power: 4 kW Voltage: 400 V Frequency: 50 Hz Door design: Sliding door Door lock: Hydraulic Type of loading: Manual Consumables: Wire, looped wire Dimensions & Weight Dimensions (L x W x H): 1,780 x 1,568 x 2,985 mm Machine weight: 2,450 kg EQUIPMENT HSM TCS (TorsionControlSystem) for monitoring the inclination of the press plate Automatic start of the pressing process

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Gjdpfora Nqhox Almobl Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Pressing force: max. 180 kN Gedora Aghepfx Almebl Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Godpfxsv Al Tis Almebl Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 386, pressing force: 50 t, filling opening width: 1,110 mm, filling opening length: 1,050 mm, bale width: 1,050 mm, bale height: 730 mm, bale weight: 425 kg, total width: 2,100 mm, total height: 3,100 mm, total length: 5,000 mm, overall weight: 6,800 kg, transport height: 2,400 mm, power: 22 kW (29.91 HP), The press was replaced by a larger one. It was used normally until dismantling. All functions were fully operational. The press is located at Chemnitzer Str. 96, 09212 Limbach-Oberfrohna. Gbedpfx Aoypb Awelmjl

Condition: new, Year of construction: 2024, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW * Piston shafts will be induction-hardened and chrome-plated. * The pressing box will be HARDOX plates. * Pumps and valves used in the hydraulic system will be MARZOCCI brand. * The hydraulic valve control lever unit will be SALAMI or VALVOIL brand. * There will be automatic Oil Cooling/Heating Systems. * There will be an oil temperature control screen on the electric panel and an oil level control on the hydraulic oil tank. Gjdpfxodfc Unj Almebl * The machine will be manually operated. * All electric-electronic material will be from the SCHNEIDER or SIEMENS brand. * Machine will be under AYMAS Makina San. ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or 2.500 working hours whichever comes first. * The machine is CE and EAC certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size: 600mm x 400mm x ... Container Dimension (Width x Length x Height ): 620mm x 1.300mm x 620mm Capacity:

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 400mm x 400mm x... 2. Container Dimensions (Width x Length x Height): 1.000mm x 2.000mm x 800mm 3. Capacity: 4 tons/hour (Steel), 5 tons/hour (Copper), 2 tons/hour (Aluminium) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons Gbedpfx Aljdfc Iyomel 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 210 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 37 kW 10. Machine Dimensions (Width x Length x Height): 3.400 mm x 6.800 mm x 3.000 mm 11. Machine Weight: 18.000 kg 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Bale Size: 500mm x 500mm x... 2. Container Dimensions (Width x Length x Height): 2.000mm x 2.500mm x 1.100mm 3. Capacity: 15-20 tons/hour (steel) 4. Cycle Time: 90 seconds ( Idle ) 5. Top Cover Cylinder Thrust: 90 tons 6. Preliminary Compression Cylinder Thrust: 150 tons 7. Main Compression Ram Thrust: 300 tons 8. Maximum Working Pressure: 300 bars 9. Electric Motor: 2 x 75 kW = 150 kW 10. Machine Dimensions (Width x Length x Height): 10.000 mm x 10.000 mm x 4.000 mm 11. Machine Weight: 55.000 kg Gbedpfx Alogwa T Remjl 12. There will be an ejection door. 13. Repairable and four-edge-usable blades. 14. Container walls will be covered with HARDOX 450 - 500 material. 15. There will be an automatic SKF liquid lubrication system integrated into the compression chamber. 16. There will be an automatic SKF greasing system that will grease the bushings. 17. Piston shafts will be induction-hardened and chrome-plated. 18. Pumps and valves used in the hydraulic system will be by PARKER or EATON VICKERS & KAWASAKI brand. 19. Bypass filter will be added to the hydraulic system. 20. There will be an AKG Hydraulic Oil Cooling System. 21. All electrical parts will be SIEMENS or SCHNEIDER Brand. 22. The machine will be fully automatic with PLC control, PLC brand and model will be SIEMENS. There will be a touch screen SIEMENS HMI Simatic Panel with emergency buttons placed on some important points. 23. There will be blades from 2767 material (hardness 55HRC) at the borders of the top cover and the sides of the scrap chamber. 24. Machine will be under AYMAS Makina San. Ve Tic. A. S. Guarantee for 1 year or 2.500 working hours whichever comes first against manufacturing defects.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under Aymas Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 120-180 kg (Steel), 50-80 kg (Aluminium),150-200 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.700mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.650mm x 2.300mm x 800mm Gsdpfxedfcqae Almsbl Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Gbedpfx Alsd Iya Nemol Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 54 t, input voltage: 400 V, power: 4 kW (5.44 HP), input frequency: 50 Hz, We offer this used baler HSM 500.1 V1, year of manufacture 2000. Model: HSM 500.1 V1 Machine number: 6132.234.0 Serial number: 210183092 Operating pressure: 54 t Gbedpfxjym Nmrj Almsl Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: A Year of manufacture: 2000 If you have any questions or require further information, please send us a message or contact us by phone.

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Gsdpfxeymmmpo Almsbl Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Baler Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Gjdpoymldtofx Almebl Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. We would be pleased if this complete baler line is of interest to you. Your service team at Mertens & Frowein GmbH