Used Emco Emcoturn E45 for sale (149)

Condition: excellent (used), Year of construction: 2011, EMCOturn E45 CNC lathe with C-axis Year: 2011 turning diameter 220 mm turning length 310 mm control Siemens 828D turning diameter over bed 430 mm spindle bore 45 mm spindle tunring speed 6.300 U/min x-travel 160 mm z-travel 310 mm number of tool places 12 Positions C-axis driven tools total power requirement 17 kW Transport dimensions ca. 3,3 x 1,5 x 1,95 m machine weight ab. ca. 3.300 kg Accessories/options: - C-axis and driven tools - driven tool holders axial and radial - static tool holders - documentations - backup Guslhcdwoxvcrxs Nsk - footpedal - tailstock - parts cather - 3-jaw hydraulic chuck - coolant tank Runned hours: 8173 Under power in our warehouse!

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Golhcdow Rrvwew Nsuk Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: like new (used), Year of construction: 2018, Technical Data: • Swing diameter over cross slide: 430 mm (max. turning diameter 220 mm) • Turning length: max. 670 mm • Spindle bore (clearance diameter): 45 mm • HS spindle interface DIN 55026 A2-5 • Main drive power: 13 kW • Max. torque: 78 (100) Nm • Speed range: 0–6300 rpm • Counter spindle interface: DIN 55026 A2-4 • Number of tools: 12 driven tools, max. speed: 0–6000 rpm • Tool holder: VDI 25 • Pressure boost station E45 for central coolant system; centrifugal pump 14 bar; lifting pump min. 1.5 bar • Chip conveyor: hinge belt conveyor, discharge height 1200 mm • Swing loader Emcoturn E45 with loading and unloading system; 2-finger parallel gripper / 90° rotating module • Belt conveyor for RT parts feeding: length 1300 mm / width 567 mm; chain pitch 27.1 mm (1800L) • Control: Siemens 828 D ⸻ • Connected load: approx. 46 kVA • Voltage: 400 V / 50 Hz • Weight: approx. 4,300 kg Guslhcjwl Uu Hsdw Njk • Space requirement: approx. 15 m²

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Gelhsu Ibihecdw Neuk Technical details shown in attached pdf document. Parts shown by hand not come.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm Gujlsx Aq Hwehcdw Nek slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: excellent (used), Year of construction: 1999, Fanuc 21T control system Turning diameter 158 mm Swing over bed 340 mm Speed 6,000 rpm 8-station turret Tailstock 3-jaw chuck, 2-jaw chuck, collet chuck Collets Guslowmzhpshcdw Nek Various tool holders

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Guslhcog Rcf Sjdw Nsk

Condition: ready for operation (used), Year of construction: 2007, operating hours: 6,615 h, functionality: fully functional, machine/vehicle number: R2EV3403, turning length: 310 mm, turning diameter: 220 mm, spindle speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, bar passage: 45 mm, TECHNICAL DETAILS Work Area Swing over bed: 430 mm Max. turning diameter: 220 mm Max. turning length: 310 mm Max. bar capacity: 45 mm Distance between centers: 687 mm Carriage Travel X-axis travel: 160 mm Z-axis travel: 310 mm Main Spindle Guslhcjxvrv Tedw Nsk Spindle nose to DIN: 55026 KK5 Front spindle bearing diameter: 80 mm Hollow clamping cylinder max. through bore: 45 mm Max. chuck size: 160 mm Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C Axis (Rotary Axis) Resolution: 0.001° Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives Feed force X: 4 N Feed force Z: 6 N Rapid traverse speed X: 20 m/min Rapid traverse speed Z: 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Positioning spread P₉ as per VDI 3441 in X/Z: 3 / 3 µm Tool System Tool holders to DIN: 69880 VDI30 Tool cross section for square shank tools: 20 x 20 mm Shank diameter for boring bars: Ø32 mm Number of tool stations / powered (option): 12 / 6 Turret indexing time: 0.14 s MACHINE DETAILS Total power requirement: 17 kW Dimensions & Weight Footprint: 2.25 x 1.63 x 1.94 m Machine weight: 3.3 t Operating hours: 6,615 h EQUIPMENT - Integrated holding brake for driven tools - Disc turret with direction logic - AC motors on X and Z axes

Year of construction: 2012, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Gujlhcdwog Rcf Io Nok

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: R2EV3502, turning length: 310 mm, turning diameter: 220 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 310 mm, rotational speed (max.): 6,300 rpm, total length: 1,630 mm, total width: 2,250 mm, overall weight: 3,300 kg, bar passage: 45 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS Swing diameter over bed: ø 430 mm Maximum turning diameter: ø 220 mm Maximum turning length: 310 mm Maximum bar capacity: ø 45 mm Distance between centers (spindle nose - tailstock center): 687 mm Carriage Travel Carriage travel X-axis: 160 mm Carriage travel Z-axis: 310 mm Main Spindle Spindle connection according to DIN 55026: KK5 Spindle outer diameter at front bearing: ø 80 mm Main Spindle Drive AC motor, power (100%/40% duty cycle): 9/13 kW With integrated holding brake for driven tools Speed range (infinitely variable): 0–6,300 rpm Max. torque: 78 Nm C-Axis (Rotational Axis) C-axis resolution: 0.001° Input for Sinumerik/Fanuc drives: 1,000 / 100 rpm Spindle indexing (disc brake, for driven tools): 0.01° Feed Drives AC motors in X and Z axis Feed force X/Z: 4,000 / 6,000 N Rapid traverse speed X/Z: 20 / 24 m/min Acceleration time from 0 to rapid traverse X/Z: 0.2 s Position dispersion Pₛₙ according to VDI 3441 in X/Z: 3 / 3 µm Gslhcdwswxwvae Nsuk Tool System Disc turret with directional logic Tool holders according to DIN 69880: VDI 30 Tool interface for square tools: 20 × 20 mm Shank diameter for boring bars: ø 32 mm Number of tool stations: 12 Turret indexing time: 0.14 s MACHINE DETAILS Total connected load: 17 kW Machine weight: approx. 3.3 t Space requirement: 2.25 x 1.63 x 1.94 m

Condition: used, Year of construction: 1990, functionality: fully functional, turning length: 800 mm, turning diameter over cross slide: 360 mm, turning diameter: 360 mm, spindle speed (max.): 4,000 rpm, spindle bore: 80 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, EMCO TURN 360 TURRET 12 Guolex Hwa Ushcdw Nsk CONTROL : SIEMENS SINUMERIK

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: R2D N2802, turning diameter: 32 mm, The machine is still powered but not operational. The turret sub-spindle is defective. Gjlhoxrdq Uecdw Nsuk

Condition: used, Year of construction: 2003, Emco lathe enco Turn 420 MC with bar loader Guslhcdeunzgrew Nsk condition see pictures

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Gujlhcdwox E Tahe Nsk Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Golhcex E Au Iodw Nouk Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Guelsx Hwfqjhcdw Nek

Condition: good (used), Year of construction: 2010, EMCO E65 TM BigBore 95 CNC Lathe with Equipment and C-Axis Year of Manufacture: 2010 Control: SIEMENS 810D with ShopTurn Machine No.: R6GY3001 Equipment: - C-axis - EMCO LM1200 short bar loader for bars up to Ø 90 mm - 12-position VDI30 turret - Pull-down automatic tool setter - SIEMENS tool breakage and wear monitoring - Parts catcher - HAINBUCH Spanntop-Nova Modular BZI 100 collet chuck Gujlhcex Hv Rxodw Nek - HAINBUCH 215 mm hydraulic chuck / Year of manufacture: 2019 - High-pressure coolant system 10 bar - Electrical cabinet cooling unit - Chip conveyor - Machine lamp - Foot switch Scope of delivery includes: - approx. 60 VDI tool holders, some equipped with tools - Turning tools and indexable inserts - Collets - Storage table - Digital operating manual - Machine parameters on storage medium For equipment, technical data, transport & installation plans, see PDF. Illustration, contents, and specifications are provided without guarantee and are therefore non-binding. All other accessories visible in the photos and videos are not included in the delivery and are not part of this sale. The scope of delivery includes only the accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier Truck) D-04643 Geithain Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of purchase

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand SIEMENS Model 828D Main Drive Spindle speed range 53 / 50 mm Spindle motor power 7.5 / 10 kW Spindle bore 53 / 50 mm Number of axis 2 Movement X-Axis Rapid Traverse 10 m/min Z-Axis Rapid Traverse 10 m/min Workpiece Workpiece drm over bed 400 mm This EMCO Emcomat E-200 was manufactured in 2016. A robust horizontal turning machine featuring a swing over bed of Ø 400 mm and a distance between centers of 1000 mm. It offers a spindle speed range of 50–4000 rpm with stepless speed control and a spindle bore diameter of Ø 80 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcomat E-200 machine we have for sale. Contact us for more information. Application Types Golhcdwex D Hzao Njuk Turning

Condition: good (used), functionality: fully functional, Used EMCO EMCOMAT 14D lathe in good condition Toolmaker's precision Travel in X/Z: 135 / 590 mm Distance between centers: 650 mm Center height: 140 mm Infinitely variable speed control Constant cutting speed MAIN SPINDLE Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Guideways hardened and ground 3-point mounting of the machine bed Diagonally ribbed, induction-hardened machine bed Rigid, split leadscrew cover Electromechanical spindle brake Chuck guard The machine is equipped with the following options: Quick-change tool holder EMCO 3-AXIS POSITION DISPLAY (TURNING) Chip protection door Machine lamp Coolant device Tool drawer Current new price: approx. €32,130 gross, plus the listed options Can be demonstrated and tested under power. Gslhcdsx Emp Aow Nouk Free loading by forklift or crane.

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Gujlhcdwovt Amuj Nok Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools SK40 holder Coolant system

Condition: as good as new (ex-display), Year of construction: 2025, Immediately available stock machine from our showroom Stuttgart. Guolsibd Alehcdw Njk ( subject to prior sale) Contact us for an offer. EMCOMAT FB 450 with Siemens control. New machine immediately available. ( subject to prior sale) Contact us for an offer. We will be happy to make you an offer. Visit our demonstration center Arbeitsbereich X450/Y350/Z400mm Table size 800x400mm 7/10kW drive power speed range stepless 10-5000 rpm Siemens 828D Universal tool milling and drilling machine with Sinumerkik 828D contouring control and hydraulic tool clamping. Arbeitsbereich X450/Y350/Z400mm 7/10kW drive power Speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Sinumerik 828D contouring control with 15" multi-touch screen incl. control package in 3 axes with ball screws and servo motors, machining cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular pocket, slot milling cycle, cycles for line-off, etc., USB interface

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Gelhcdwex Hwano Neuk Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Guslhcdwedtmwto Nsk Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, total height: 1,990 mm, total length: 2,100 mm, table width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, workpiece weight (max.): 300 kg, Equipment: rotational speed infinitely variable, Universal milling and drilling machine with Heidenhain TNC 620 contouring control as manual machine operable via handwheels. Control can be locked via key switch and hydraulic tool clamping. Arbeitsbereich X600/Y400/Z400mm 7/10kW drive power speed from 10-5000 rpm feed rate from 10-2000 mm/min rapid traverse up to 5000 mm/min Toolmaker accuracy DIN8615 tool holder DIN 69871 SK40 Includes:Linear guides Ball screws Vertical milling head +/-90° swiveling with 80mm quill stroke Swing out device for vertical head Hydraulic tool clamping Coolant device LED machine lamp Rigid angular table 800x400mm Chip tray Automatic central lubrication Operating tool Documentation Heidenhain TNC 620 contouring control with 19" multi-touch screen incl. drive package in 3 axes with ball screws and servo motors, Fixed cycles with graphic support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on hole circle and hole lines, rectangular and circular Gjljibarqehcdw Nsuk pocket, slot milling cycle, cycles for line-off, etc., USB interface, PC keyboard

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 200 mm, quill stroke: 120 mm, quill diameter: 50 mm, total length: 1,950 mm, total width: 1,060 mm, total height: 1,635 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 40 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Whether prototype construction, maintenance or, most importantly, training - EMCO's conventional and cycle-controlled machines manage the balancing act and offer maximum accuracy in the smallest possible space and flexibility down to the last detail. Highlights of the EMCOMAT 20D- Main spindle DIN55029- Tailstock (eccentrically adjustable)- Simple steel holder (clamping claw)- Belt drive for feed gear- Chuck protection with electric limit switch- Optional equipment such as coolant device, sliding chip guard doors etc.Working range:- Travel in X/Y/Z: 220 / - / 1010 mm- Center distance: 1000 mm- Center height: 200 mmMain spindle:- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 220 / - / 1010 mm- Max. travel distance in X/Y/Z: 1000 mm Speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm - Max. speed: 3000 rpm - Spindle connection: Size 5 (DIN 55029)- Max. speed: 3000 rpm Drive power: 5.3 kW Tailstock:- Inner cone: MK3- quill stroke: 120 mmm- inner cone of the quill: 50 mm Gelhcsd D I Thjdw Njuk