Used Fag 507122 for sale (133)

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PR721523001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC-460, spindle speed (max.): 15,000 rpm, The new price of the machine was approximately €140,000 in 2023! No tools or a vise are included. However, these can be purchased separately upon request. TECHNICAL DETAILS Travel range X-axis: 1,300 mm Travel range Y-axis: 650 mm Travel range Z-axis: 600 mm Spindle speed: 15,000 rpm Main spindle servo motor Siemens: 20/53 kW Main spindle servo motor Fanuc: 15/30 kW Spindle taper: SK 40 Work table Table dimensions: 1,500 × 650 mm Table load: max. 1,200 kg T-slots: 18 × 5 × 100 mm Distance spindle to table surface: 150–750 mm Distance spindle center to Z-axis cover: 697 mm Rapid traverse X/Y axis: 36 m/min Rapid traverse Z axis: 36 m/min Working feed rate: max. 1–12,000 mm/min Feed motors X/Y/Z: 3.2/3.2/4.3 kW Torques of the feed motors X/Y/Z: 20/20/27 Nm Podpfx Aezlh S Aoi Torc Tool positions: 28 Tool length: max. 300 mm Tool diameter: max. 75 mm Tool diameter with free auxiliary positions: max. 125 mm Tool weight: max. 8 kg Tool change time: 1.6 s MACHINE DETAILS Control system: Heidenhain TNC-460 Accuracy without linear glass scales Positioning accuracy over the entire travel range: 0.012 mm Repeatability accuracy over the entire travel range: 0.008 mm Accuracy with linear glass scales Positioning accuracy over the entire travel range: 0.008 mm Repeatability accuracy over the entire travel range: 0.006 mm Cooling and power supply Coolant tank volume: 250 l Coolant flow rate: 40 l/min Mains voltage: 400 V ± 10 % Number of phases: 3 Mains frequency: 50 Hz Connected power: 85 kVA Dimensions and weight Dimensions (L × W × H): 4,025 × 3,090 × 3,185 mm Weight: 8,000 kg EQUIPMENT Direct drive Double-arm tool changer O-BLUM tool measuring system Lasercontrol NT O-BLUM workpiece measuring system TC50 Electronic handwheel (MPG) Thread drilling without compensation chuck USB interface CF card interface Ethernet interface HIWIN linear guides with roller guides in all axes HIWIN ball screws Directly driven main spindle NSK/FAG main spindle bearings Separate oil-air spindle cooling unit Fully enclosed tool changer for protection against chips Pneumatic intermediate tank for the tool changer as a backup in case of pressure drop Fully enclosed splash guard Separate air conditioning system for heat dissipation from the control cabinet Siemens electrical components Automatic, path- or time-controlled central lubrication system Kyarow telescopic covers in all axes Coolant system with adjustable nozzles as a coolant ring around the spindle Chip flushing system in the interior for optimal chip collection Spiral chip conveyor working in the Y-direction for removing chips from the machining area Rear chain chip conveyor

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 18.000 kg Productivity: 10 tph Polymer Modification Plant Full Automatic TECHNICAL SPECIFICATIONS Grinding and homogenizing Polymer (SBS,APP,KRATON etc.) and bitumen. Feeding : Bitumen and polymer pre-mixture Flow rate : max. 15 t/hour Density : 1.1 g/cm3 Viscosity : max.20000 mPa s (cP) Heat: 190 °C Solid Matter : Machine Entrance :max. 3-6 mm Machine Exit :max. 0.2 mm MOTOR 130 kW Speed 3000 min-1 Voltage 400 V,50 Hz,3 phase Starting methode Y/Δ 2. VERTICAL MIXING TANK a) Frame - Will be manufactured as vertical rectangular profile. - Will be manufactured in dimentions as providing 11 m3 volumes. - Body will be produce 5 mm St37 quality plate. - Bitumen filling pipe will be 3’’ DN80 ,PN16,DIN2633 1 unit, discharge pipe will be 3’’ DN150,PN16,DIN2633 and 3’’ DN80,PN16,DIN 2633 2 units. - Control cover will be dimensions of 500x500 mm. b) Heating - It will be as providing from from out walls with diathermic hot oil heating. - Imperviousness test will not be performed under 6 bar. c) Insulation - 100 mm rapid wire-mesh rock wool will be comply with TSE ( Turkish Standards Institute ) standarts. - The exterior surface will be stainless steel plate and will be manufactured as to container dimentions. d) Mixing System - 2x 7,5 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. e) Heat displays will be digital and analogue and two outlets will exits. f) Built-in connection paddle, ladders and platform will be presented. 3. BITUMEN PUMPS - Will be 2 ½ XLA type with oil heating. - Pump capacity will be as 25 t/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. 4. SBS (POLYMER MODIFIED GRANULE) FEEDING UNIT a) Feed Hopper - Will have 500 x 500 gap width - Will be produced of 4mm plate - In feding helix, it will be mounted with bolt30 m3/h capacity granulate feeding. - Frame will be in 5 mm Wall thickness from 220 mm diameter pipe. - Imperviousness will be provided in beddings. - In bearings SKF or FAG will be used. - Will 5,5 kW 80 rpm gear unit with coupling drive. 5. PIPE NETWORK AND EQUIPMENTS Prsdpfx Asx D Df Nji Toc a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 3’’ inner pipe, 4’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 1’’. b) Compensatories - DN 50,DN 80, PN 16 400°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Pneumatic control type will be used. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve with pistons will be used. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - Will be with 3’’ flange entrance and exit...

Condition: new, FAG NU1044 cylindrical roller bearing, single row, unused, 100% functional, scope of delivery as shown in the photos. Psdpfx Aoi D Uudei Torc

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000S Year of manufacture: 2018 Prsdpfx Aiezlx A Sj Tsc Travel ranges: X = 350 mm, Y = 250 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-V generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.05 – 0.30 mm incl. option KIT 50 Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Incl. AGIEJOGGER handheld control box for convenient setup VISION 5 control system 15" LCD color screen, jog shuttle and mouse Incl. AGIESETUP 3D Incl. Conic-Plus option for improved taper Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. We will gladly perform an individual test cut. We also offer commissioning and training on-site for this machine.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Die-sinking EDM machine GF AgieCharmilles Spirit 4 Year of construction 2008 Travel (X/Y/Z): 700 x 500 x 400 mm Max. Workpiece dimensions: 920 x 550 x 370 mm Max. Workpiece weight: 2000 kg Distance table - quill: 215 -615 mm Bath level up to 415 mm Incl. pneumatic chuck 3R-Systems or Erowa ITS 50 of your choice Incl. 28-fold electrode changer Max. Electrode weight: 80 kg Incl. C-axis with U=0-40 rpm Total weight (without dielectric): 4000 kg Dimensions: 3000 x 3000 x 2865 mm The machine is cleaned, serviced and tested by us after receipt of order. We are happy to offer you the following additional services and products: - Commissioning - transportation - training Pjdeq N Ap Sepfx Ai Terc - Clamping devices - Dielectric - Cooling unit

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 2,000 kg, quill stroke: 400 mm, distance table to quill: 215 mm, workpiece length (max.): 920 mm, workpiece width (max.): 550 mm, workpiece height (max.): 550 mm, overall weight: 4,000 kg, Sinker EDM machine GF AgieCharmilles Spirit 4 Prsdpfjz D Apdsx Ai Tjc Year of manufacture: 2008 Travel ranges (X/Y/Z): 700 x 500 x 400 mm Max. workpiece dimensions: 920 x 550 x 370 mm Max. workpiece weight: 2000 kg Distance table - quill: 215 - 615 mm Bath level up to 415 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50 (customer’s choice) Includes 15-position electrode changer in magazine Max. electrode weight: 80 kg Includes C-axis with U = 0-40 rpm Total weight (without dielectric fluid): 4000 kg Dimensions: 3000 x 3000 x 2865 mm After receiving your order, the machine will be cleaned, serviced, and tested by us. We would be pleased to offer you the following additional services and products: - Commissioning - Transportation - Training - Clamping devices - Dielectric fluid - Cooling unit

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Pedpfjyz An Tox Ai Tjrc

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. Psdpfxex D A Rkj Ai Tjrc - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: ready for operation (used), Year of construction: 2007, Make: MIKRON / GF AGIECHARMILLES Type of machine: UCP 600 Vario Year of manufacture: 2007 Control system: Heidenhain iTNC 530 Machine's weight: 7.700 kg Tool holder: HSK-A63 spindel speed: 20.000 1/min x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm Speed range: 20.000 1/min max. Table load: 200 kg Spindle lock: HSK-A63 Max. workpiece weight: 200 kg Operating time: 57.098 h Pjdpfxszkr Tne Ai Terc Chip removal device: Ja Cooling system: Ja Spindle operating time: 3.003 h Tailstock: Nein Overall dimensions: 6.820 × 4.800 × 2.810 mm Traverse Z-axis: 450 mm Table dimensions: Ø 450 mm Number of tools in the magazine: 30 Internal coolant supply: Ja Clamping assembly: HSK-A63 3D Measuring probe: Ja (Blum) : Ja : Nein

Condition: new, Rotary mowers suitable for the tractor with three-point linkage category I. For mowing larger lawns. Suitable for small tractors from 12 to 60 hp. Also available galvanized for a longer life, type FAG. . Prsdps Af Tmnofx Ai Toc . Condition: New

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2012 Charmilles Millenium control system Travel ranges (X / Y / Z): 550 x 350 x 400 mm Travel ranges (U / V): 550 x 350 mm Max. conical angle: +/- 30° at a height of 400 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg After receiving your order, we will clean and overhaul the machine and test all functions. Pedpfx Aiezgt R He Tsrc You will receive a warranty of 6 months on the machine. We would be happy to offer you the commissioning of the machine.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,875 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 900 mm, workpiece length (max.): 1,450 mm, overall weight: 6,300 kg, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control system: Charmilles Millenium Travel ranges (X / Y / Z): 800 x 550 x 510 mm Podpezhlvksfx Ai Tjrc Travel ranges (U / V): 800 x 550 mm Max. conical angle: +/- 30° at a height of 510 mm Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Includes option for a large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine will be cleaned, completely overhauled, and tested for all functions after order receipt. Optional: - Commissioning of the machine at your location - On-site training - Cooling unit - Transportation - Clamping device set

Condition: refurbished (used), Year of construction: 2011, operating hours: 23,800 h, functionality: fully functional, machine/vehicle number: 256, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. Podpfoz I I Tcex Ai Torc You will receive a 6-month warranty on all machine parts. Commissioning and training services are also available on request.

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch, hand-held arc torch, gouge, gouge nozzle -Harris: FAG3 jointing nozzle -Pressure: 6.0 - 7.0 bar Prsdpfxefdkgvs Ai Toc -Price: per piece Quantity: 6 pieces -Dimensions: 100/19/H19 mm -Weight: 0.1 kg/piece

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Type BAFAG ATU 25 Pedeuvg Dxjpfx Ai Tsrc Power output: 2 kW Year of manufacture: 2016 Tested and fully functional.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Manufacturer: Ryser GmbH, Switzerland Type: BAFAG ATU 15 Prodpfx Aovz Svboi Toc Power: 2 kW PRICE REDUCTION!

Year of construction: 2026, condition: new, Galvanized on request. 1. Rotary screen, 1600 mm, length 2800 mm, 4 mm woven wire (others on request), perforation 20x20 mm, drum speed approx. 13.5 RPM, 4 kW, 2. Undersize material elevator. 9000 mm long, 650 mm wide, up to 2300 mm high, 3. Hopper with a length of 3300 mm, a width of 1500 mm with adjustable belt speed via a variable speed drive, 4. Semi-mobile. Mounted on a chassis with wheels and a lower (removable) trailer coupling (without or other – on request), 5. Cleaning brush with a diameter of 300 mm, length 2000 mm, 6. Drum drive via a gear motor + 2 rubber drive wheels with a diameter of 230 mm, 7. Supports with adjustable height, 8. Discharge height (oversize) from the drum 1000 mm, 9. Overall height with brush 3100 mm, overall width 2600 mm, overall length 9700 mm, 10. Equipped with an electrical control panel, switch 0/1, safety stop switch, motor overload switch, 11. Total power supply 9.2 kW, 12. CE certificate, 12 months warranty, manufactured in the EU (Poland), 13. Capacity approx. 50 t/h (topsoil), 14. Weight: approx. 3 tons. 15. Tramec durable gear motor (with speed control in the hopper), 16. FAG and SKF roller bearings, 17. Structures made of closed steel profiles – steel grade S355, 18. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 19. Drum construction is protected against corrosion – hot-dip galvanizing (!), 20. Drum structure – S355 steel. Wall thickness 3 mm, perforation to be agreed (option), 21. Brush with adjustable spring. The brush pressure can be adjusted, Prjdpfsd Rz T Esx Ai Tec 22. Electrical sockets and emergency stop switches on both sides of the machine, 23. Drum covers. Powder-coated in the paint booth. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length – on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English, and Russian.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Prodszxf R Aepfx Ai Tec Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2260 • Type: Vibrating Screen • Size: 2200 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 200-350 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Pjdpfx Aiozz R E Ro Tsrc Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-2060 • Type: Vibrating Screen • Size: 2000 x 6000 mm • Deck size: 2-3-4 • Motor: 22 kW Bearings: Heavy duty SKF-FAG • Capacity: 180-220 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 760 mm, workpiece width (max.): 450 mm, workpiece height (max.): 255 mm, overall weight: 4,000 kg, Wire EDM machine GF AgieCharmilles Spirit 3 Year of manufacture: 2008 Travel ranges (X/Y/Z): 550 x 400 x 350 mm Max. workpiece dimensions: 760 x 450 x 255 mm Max. workpiece weight: 1000 kg Distance table - quill: 170-520 mm Bath level up to 295 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50, selectable Includes 10-position electrode changer in the magazine Max. electrode weight: 50 kg Includes C-axis with U=0-40 RPM Total weight (without dielectric fluid): 3300 kg Dimensions: 2800 x 2800 x 2690 mm After receiving your order, we will clean, service, and test the machine. You will then receive a 6-month warranty on the machine. We would be happy to provide you with free training on the machine at our facility. We would also be pleased to offer you the following additional services and products: - Commissioning - Transport Psdezcawmjpfx Ai Tsrc - On-site training - Clamping devices - Dielectric fluid - Cooling unit

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - Prsdpfx Aobatamoi Toc This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Year of construction: 2026, condition: new, Galvanized. 1. Rotary screen, 1600 mm, length 4880 mm, 4 mm woven wire (optional - 5.0 mm sheet metal at an extra charge), perforation 20 x 20 mm (or other upon request), drive 4 kW, drum speed approx. 14 rpm, 2. Receiving conveyor (under the drum). Length 3700 mm, width 800 mm, 3. Undersize material elevating conveyor. 4000 mm long, 650 mm wide, up to 2500 mm high, drive 3 kW, 4. Oversize material elevating conveyor. Length 4000 mm, width 650 mm, height 2500 mm, drive 3 kW, 5. Hopper with a length of 3000 mm, a width of 1800 mm with adjustable belt speed via a variator. Drive 3 kW, 6. Semi-mobile. Mounted on a chassis with wheels and a lower trailer hitch, 7. Cleaning brush with a diameter of 300 mm, length 4000 mm, 8. Drum drive via a gearmotor + 2 rubber drive wheels with a diameter of 230 mm, 9. Hour meter, 10. CE certificate, 12 months warranty, manufactured in EU (Poland), 11. Equipped with an electrical control panel, switch 0/1, Psdped Rzy Nofx Ai Tsrc safety stop switch, motor overload switch, 12. Weight: approx. 3.5 tons, 13. Tramec durable gearmotor (with speed control in the hopper), 14. FAG and SKF rolling bearings, 15. Structures made of closed steel profiles - steel grade S355, 16. Conveyor rollers made of high-quality materials. Only SKF ZZ bearings, 17. Drum construction is protected against corrosion - hot-dip galvanized (!), 18. Drum structure - S355 steel. Wall thickness 3 mm, perforation to be agreed upon (optional), 19. Brush with adjustable spring. The brush pressure can be adjusted, 20. Electrical sockets and emergency stop switches, on both sides of the machine, 21. Drum covers. Powder-coated in the painting booth. The final technical specifications (length, width, perforation, additional components, etc.) are always agreed upon individually with the customer according to their needs. Sand. Black soil. Coal. Mixed waste. We prepare the machine according to your requirements. We produce rotary screen machines: 1) Stationary, semi-mobile, mobile, 2) Diameter, drum length - on request, 3) Electric, diesel-electric. We have many references in the European Union. We speak Polish, German, English and Russian.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Prsdpfx Aijxx Uqfj Toc Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 Prsdpfx Aeqpd Snoi Toc 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS

Year of construction: 2026, condition: new, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1650 • Type: Vibrating Screen Podpfxezzzn No Ai Tsrc • Size: 1600 x 5000 mm • Deck size: 2-3-4 • Motor: 15-18,5 kW Bearings: Heavy duty SKF-FAG • Capacity: 100-130 TPH • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!