Used Falken // Crl Mod. Aco-1, 400 Volt for sale (86,883)

Condition: excellent (used), Year of construction: 1979, power: 38 kW (51.67 HP), stroke length: 400 mm, table width: 1,320 mm, table length: 1,000 mm, total height: 6,300 mm, distance between stands: 1,000 mm, ram adjustment: 200 mm, Trimming press ERFURT type PKZ 400/1000 Capacity, ton 400 Stroke 400 mm Table size (left to right) 1000 mm Table size (front to back) 1320 mm Ram (left to right) 800 mm Ram (front to back) 1060 mm Ram adjustment 200 mm Strokes 18 min-1 Shut height 685 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 38 kW Required space 2550 x 2700 mm Hodpfx Amjlnlpxegon Height of machine above floor 6300 mm Weight without bottom ejector 33,8 t Total weight 38,5 t

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Hjdpfxeuayy Ts Amgon Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Hodpeuayyyjfx Amgjn Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Hedpfou A I Elex Amgsn Gewicht - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: Hedjyga Ugopfx Amgjn • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Condition: used, We are offering used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. Hedpfx Amsy Hqrkogon PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), axle configuration: 1 axle, first registration: 10/2003, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 10,920 mm, total width: 2,600 mm, suspension: steel, color: other, Year of construction: 2003, Equipment: ABS, Tail lift: Dhollandia, tail lift XL9TRAC1139082067 Hedpfeymr Daox Amgjn = More information = Axle configuration Brakes: disc brakes Suspension: leaf suspension Rear axle: Double wheels; Steering; Tyre profile left inner: 45%; Tyre profile left outer: 45%; Tyre profile right outer: 45%; Tyre profile right outer: 45% Weights Empty weight: 7.960 kg Carrying capacity: 14.040 kg GVW: 22.000 kg Functional Make of bodywork: CARRIER VECTOR 1850 Condition Technical condition: very good Visual appearance: very good Identification Registration number: OH-02-JD = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension Hjdexaaxqspfx Amgsn - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: used, functionality: fully functional, Slow-running plastic granulator – only 25 rpm, preventing thermal damage. Gear roller mill Goliath Plus 1 Milling chamber size (feed chute): 228 x 172 mm Power requirement only 1.5 kW Weight 230 kg (built like a tank) Dust-reduced, consistent granulate quality. Easy cleaning in 2–3 minutes! Very quiet operation. Low energy consumption. Rotatable cutter elements for double the cutter unit service life Hedpjy Azp Ejfx Amgen Paddle level indicator in the discharge hopper: No "grinding in its own juice" possible, as the mill shuts down in advance.

Condition: as good as new (ex-display), Year of construction: 2023, sheet width 1050 mm plate thickness 1.50 mm daylight opening 100 mm bending angle max. 135 ° height OW 100 mm total power requirement manuell weight of the machine ca. 330 kg. dimensions of the machine ca. 1600 x 900 x 1450 mm Hsdpfxoxaa T Uo Amgon Exhibition machine from 2023 only 2x machines in stock special price on request Features: - robust, manual folding machine - split upper, lower and rear tool * Height of upper tool = 100 mm * Pitch 100/100/100/100/100/100/100/100/100/70/60/50/40/30/100 * Left right with horn tool - Upper tool with quick-change system - Quick foot clamping - Angle fence - lockable - Manual back gauge 500 mm - Machine can be moved (rollers) - Accessory box - rear * Pictures show identical machine (UFA 1212)

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼" Hedpfsyx Irlsx Amgen

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. Hedpfxjxabcws Amgsn dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed Hedoxaabfopfx Amgen * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, The engine is new, unused, and comes from stock. In very good condition, ready for operation. Hsdpfx Amjyv R Nnogsn Technical data Manufacturer: EMK Model: KAE2A132M 4B3E2K Power: 7.5 kW Rotational speed: 1455 rpm Voltage: 400 / 690 V Frequency: 50 Hz Efficiency class: IE2 Protection rating: IP55 Duty type: S1 Insulation class: F Design: IM B3 Weight: approximately 54 kg

Condition: used, functionality: fully functional, 400 kVA transformer station, year of manufacture 2019, station UK220-2.9X, transformer DOTUL400/10, year 2013, oil-cooled transformer, 10kV ±2x2.5%/400V, with HV plug-in bushings AK, with LV porcelain bushings, pointer thermometer. Hodpfx Amexzq Hbogen

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST Shaft length 140 mm roll diameter 62.0 mm throat 100 mm Hsdpfjxaaf Rsx Amgjn roll speed 16.0 + 32.0 U/min engine output 0.75 kW weight 135 kg range L-W-H 900 x 450 x 1350 mm Display machine - like new Never been used (!!) Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame

Condition: as good as new (ex-display), Year of construction: 2025, plate thickness 1.20 mm ST shaft length 140 mm roll diameter 62.0 mm throat 100 mm total power requirement manuell kW weight of the machine ca. 50.0 kg dimensions of the machine ca. 560 x 220 x 500 mm Display machine - like new Never been used (!!) Hodpfjxacilsx Amgsn Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm Hsdpjxacbujfx Amgsn roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1250 mm plate thickness 1.5 mm roll length 1270 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 400 kg range L-W-H 1730 x 700 x 1160 mm Exhibition machine - like NEW Hsdexaafdjpfx Amgsn not yet in use (!!) Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine Hsdpsxabkbjfx Amgen * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: excellent (used), Year of construction: 1997, Face plate diameter 400 mmHeight 100 mm Hsdpfx Amsd Tyu Segon

Condition: good (used), The scope of delivery includes: 01x U- collision protection, used material color: yellow total height: approx. 400 mm profile dim. outside: U: approx. 100 x 50 mm profile dim. outside: U: approx. 80 x 40 mm material thickness: approx. 6,00 mm Hodpfx Asn R Edmjmgjn base plate dim.: approx. 200 x 100 mm Drill hole Ø: approx. 12 mm Number of drill holes: 04 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the extension lugs: Manufacturer: Jung Heinrich Type: MPB Included in delivery are 02x extension lugs, used total length: approx. 400 mm total width: approx. 129 mm inside width: approx. 121 mm f. Frame profile width: approx. 120 mm Depth: approx. 49 mm material thickness: approx. 4,00 mm hole spacing i. d. depth: approx. 100 mm hole grid i. d. width x height: approx. 85 x 100 mm Drill hole Ø: approx. 10 mm Material color: blue Weight / pcs.: approx. 2,59 kg Note: Hjdpsipt Ddsfx Amgjn No screw material included in delivery.

Condition: good (used), We offer here II. Choice post protector of the manufacturer SSI Schäfer for sale. Included in delivery are: 01x post guard, II. choice Material color: yellow Finish: V Total height: approx. 400 mm total width: approx. 112 mm inner width: approx. 104 mm total depth: approx. 60 mm leg dim.: approx. 65 x 65 mm material thickness: approx. 4 mm grid/ hole spacing: approx. 250 mm Number/ holes: 04 pcs. (02 pcs./ side) Hole Ø: approx. 9 mm 04x hexagon head screw: M8 x 35 mm 04x Toothed nut: M8 Hodpfx Aehr U S Uomgon 04x washers: M8 General information about the item: This item is offered for pickup only. A beyond that desired transport or shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: new, weight max. 1000 kg table turning speeds 180 - 1800 mm/min. roll diameter 200 x 50 mm workpiece diameter 50 - 1500 mm volt 230 V / 50 Hz range L-W-H 950 x 220 x 344 mm Mitlauf range L-W-H 1270 x 310 x 344 mm Antrieb weight 100 kg Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure; easy to handle. Hsdexabkuopfx Amgjn Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German