Used Femia Bean Calibrator for sale (1,147)

Condition: good (used), Lower and upper calibration line for panels, consisting of: First lower machine roller - roller - pad Second upper machine roller - roller - pad Tjdpeu S Rccsfx Afwjb Speed variator, width 1300mm Depression for small pieces and brushes at the exit

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Motor power: 2 x 15 kW Tedpfxjxp Ecyo Afwob

Year of construction: 2019, operating hours: 6,483 h, condition: like new (used), functionality: fully functional, Refurbished Comandulli OMEGA 100, year 2019, 6483 working hours. All bearings changed, new belt. Machine like new. Tested. Guarantee 1 year. Tsdjxudl Djpfx Afwsb

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Tsdpfxjxbdyhs Afwob Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Condition: used, mileage: 1,020,005 km, power: 265 kW (360.30 HP), first registration: 10/2017, fuel type: diesel, empty load weight: 7,121 kg, maximum load weight: 11,879 kg, overall weight: 19,000 kg, tire size: 315/80 22,5, tire condition: 30 %, axle configuration: 4x2, next inspection (TÜV): 01/2027, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, Year of construction: 2017, operating hours: 1,020,005 h, front tire size: 315/80 22,5, rear tire size: 315/80 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, sliding door, truck registration, Vehicle number for inquiries: 41530 Mercedes-Benz, Actros * Year of manufacture: 2017 * ABS, Anti-lock Braking System * Power windows * Automatic climate control * Alloy wheels * Air suspension * Power steering * Sleeper cab * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Digital tachograph * Radio/CD player * USB interface * OBU preparation * Electric windows and mirrors Tjdpfjzlbhdsx Afwjb * AdBlue tank * Comfort suspension seat * Multifunction steering wheel * Sun visor * Lane change warning * Forward collision warning * Inspections: MOT / emissions test valid until 01.2027 * Transmission type: Automatic * Suspension: Leaf spring / Air * Gross vehicle weight: 19,000 kg * Unladen weight: 7,121 kg * Payload: 11,879 kg * Permissible gross vehicle weight: 19,000 kg * Tire condition 1st axle: 40% - 40% - Tire size: 315/80 R22.5 * Tire condition 2nd axle: 30% / 30% - 30% / 30% - Tire size: 315/80 R22.5 * Tire sizes: 315/80 R22.5 * Prepared for auxiliary drive Disclaimer: Subject to changes, prior sale, and errors excepted. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialist staff; we will be happy to advise you.

Condition: good (used), Year of construction: 2001, For sale: complete Insta-Pro soybean extrusion and mechanical oil pressing line. Manufacturer: Insta-Pro Year: 2001 Configuration: 2 extruders + 2 oil presses Filtration: original AMA automatic oil filtration system Cake cooling: included Capacity: up to approx. 1,200 kg/h, depending on soybean quality, moisture, temperature and operating setup Condition: used, fully functional according to seller information Location: Slovakia, EU The line is designed for chemical-free mechanical processing of soybeans by extrusion followed by oil pressing. Included: 2 Insta-Pro extruders 2 Insta-Pro oil presses original AMA automatic oil filtration system cake cooler electrical and process equipment as shown in the photos Suitable for: soybean extrusion and mechanical oil extraction full-fat soybean processing partially defatted soybean meal / cake production non-GMO soybean processing organic soybean processing feed ingredient production small and medium oilseed processing plants The combination of dry extrusion and mechanical pressing allows production of valuable soybean meal / cake and crude soybean oil without solvent extraction. The line is available for inspection in Serbia. Sold as shown in the photos. Loading possible. Zu verkaufen: komplette Insta-Pro Soja-Extrusions- und Ölpresslinie. Hersteller: Insta-Pro Baujahr: 2001 Konfiguration: 2 Extruder + 2 Ölpressen Filtration: originale automatische AMA Ölfiltration Kühlung für Presskuchen: inklusive Kapazität: bis ca. 1.200 kg/h, abhängig von Sojaqualität, Feuchte, Temperatur und Einstellung Zustand: gebraucht, laut Verkäuferangabe voll funktionsfähig Standort: Slowakei, EU Die Linie ist für die chemikalienfreie mechanische Verarbeitung von Sojabohnen durch Extrusion und anschließende Ölpressung ausgelegt. Enthalten: 2 Insta-Pro Extruder 2 Insta-Pro Ölpressen originale automatische AMA Ölfiltration Kühler für Presskuchen elektrische und prozesstechnische Komponenten wie auf den Fotos Geeignet für: Sojaextrusion und mechanische Ölgewinnung Tedpfoxuahbjx Afwob Verarbeitung von Vollfettsoja teilentfettetes Sojamehl / Sojakuchen Non-GMO Sojaverarbeitung Bio-Sojaverarbeitung Futtermittelproduktion kleine und mittlere Ölsaatenverarbeitung Die Kombination aus Trockenextrusion und mechanischer Pressung ermöglicht die Herstellung von hochwertigem Sojakuchen / Sojamehl und rohem Sojaöl ohne Lösungsmittel-Extraktion. Besichtigung in der Serbien möglich. Verkauf wie auf den Fotos. Verladung möglich.

Condition: new, Promess KA-EMF20/150 Servo Press 20 kN Manufacturer: Promess Tedpfx Afjrgn N Sjwob Type: KA-EMF20/150 Type: Servo Press KN: 20 Condition: New Calibrated: Yes Strain Gauge Amplifier: BA 62601 Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used servo presses in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 7525SE-0949-FA, measuring range X-axis: 2,600 mm, number of axes: 7, TECHNICAL DETAILS Axes: 7 Measuring range: 2.6 m Accuracy Acceptance temperature: 20 °C Humidity during acceptance: 50 % Permissible single-point deviation: 0.028 mm Determined single-point deviation: 0.010 mm Maximum permissible volumetric length measuring deviation: ± 0.039 mm Determined volumetric length measuring deviation: -0.018 mm Tedpezv Rhujfx Afweb Scanner Manufacturer: Hexagon Model: CMS108 Integration: Calibrated within the measuring arm Note: Can be used on the measuring arm with appropriate scanning software Note: Scanning software not included in the scope of delivery MACHINE DETAILS Design: Portable measuring system Weight of measuring system including transport case: approx. 40 kg External dimensions of transport case for measuring arm: approx. 1,350 x 550 x 350 mm Dimensions of tripod: approx. 750 x 750 x 750 mm Weight of tripod: approx. 75 kg Dimensions of scanner case: approx. 600 x 450 x 220 mm Weight of scanner including carrying case: approx. 6 kg Notebook size: 17 inches Note: The measuring arm was relabeled before the last calibration. EQUIPMENT - Hexagon ROMER Absolute Arm RA-7525SE measuring arm, 7-axis - Mobility Pack FP2-1503-FA with wireless computer connection - Transport case for measuring arm - Magnetic base - Test bar, length 700 mm - Test sphere, diameter 25 mm - Probe box with 3 probes - Probe with ruby ball, diameter 6 mm - Probe with ruby ball, diameter 3 mm - Calibration sphere, diameter 15 mm - Dust cover - Complete cable set - Calibration certificate for measuring arm, notebook Dell M6600 - PowerInspect 11 software including hardware dongle - Hexagon RDS software - Brunson 231 roll stand, height-adjustable - Height adjustment range of tripod: approx. 700 to 1,100 mm - Scanner Hexagon CMS108 - Carrying case for scanner - Calibration certificate for scanner Note: PowerInspect 11 is exclusively for tactile measurements and cannot be linked with a scanner. Note for packaging request: €250 for special pallet with cardboard construction and tripod on a Euro pallet.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Todpfx Afszvnfwowob Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 2,940 h, 2011 | John Deere 9770 STS | Used Combine | 2,940 hours Location: Indiana, United States Delivery available to your destination. About this machine: 2011 John Deere 9770 STS combine, 2WD, rotary threshing system. Equipped with Contour Master lateral tilt feederhouse, high-capacity lift cylinders, and extended wear round bar concaves and grain handling components for long-term durability. Set up for corn/bean harvesting with a chopper and Power Cast tailboard. ✔ Premier cab, AM/FM ✔ Service lights, HID lights ✔ Command Touch multi-speed heavy duty feeder house drive ✔ High capacity lift cylinders ✔ Extended wear round bar concaves ✔ Extended wear grain handling ✔ Deep tooth chaffer ✔ 22.5' unloading auger ✔ ProDrive transmission ✔ Clean grain auger and fan bottom protection shielding ✔ Block heater ✔ Updated cross auger shut offs ✔ Yield Monitor Todpozxh Evsfx Afwjb Key specs: Engine: diesel, 8.98 L, rated power 360 hp / peak 385 hp, Tier 3 Grain tank: 10,572 L (300 bu) Unloading rate: up to 116 L/sec (3.3 bu/sec) Separating area: 1.1 m² (concave) Total cleaning area: 4.5 m² sieve + 1.9 m² chaffer Fuel tank: 946 L Tires: 20.8-38 duals (front, 60%), 28L-26 (rear, 50%) Operating weight: 14,862 kg What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Pre-sale inspection ✔ Instant shipping rates and worldwide delivery ✔ Documentation support ✔ Secure transaction on every purchase

Condition: like new (used), Year of construction: 2022, The Jeti Tauro H3300 is Agfa's 3.3 m-wide hybrid UV inkjet printer, designed for high-volume production on both rigid and flexible media. Agfa currently lists it with speeds of up to 1,280 m²/h, a maximum print width of 330 cm, and configurable/upgradeable automation, speed and colors Manufacturing Year: 2022 Colour configuration: CMYK Lc Lm + white Roll to roll: included Mileage: lamp usage 600 hours, the printer has very low mileage, like show room printer!!!!! Service: Under Agfa service contract Under production, demo possible Location: Western Europe Print head status: excellent Availability: September 2026 For further technical details please refer to enclosed brochure Positioning 3.3 m-wide hybrid UV LED inkjet printer Tsdpfszx Harox Afwjb Designed for both rigid and flexible substrates 6-color configuration Standard productivity: up to 450 m²/h Can be upgraded to H3300 HS, reaching up to 600 m²/h Optional white, or white + primer Built for high-volume / multi-shift production A Agfa +1 Main commercial advantages Growth path: start with the H3300 S and upgrade as production volume increases. Wide application range: signage, displays, POP/POS, boards, banners, décor, packaging and other rigid/flexible applications. Low ink consumption: Agfa's Thin Ink Layer™ technology helps reduce ink usage while maintaining strong image quality. Automation: options include automatic board feeding and automated loading/unloading. Asanti workflow: integrates production preparation, job management and calibrated print modes for color consistency.

Year of construction: 2020, condition: used, This listing is for Agilent MagnisDx NGS Prep System The unit is in full working condition and ready for immediate use The Agilent MagnisDx is an automated benchtop system for NGS library preparation and target enrichment. It supports automated workflows using Agilent SureSelect chemistry, with barcode checking, pre-set protocols and integrated workflow automation for reproducible results Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Tjdpfx Afjzw Dv Iswob Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 152290, SPECTRO SPECTROMAXX optical emission spectrometer (OES), floor model (2020). Serial number: 152290 Wavelength range: 140-670 nm Dimensions (floor model): approx. 790 x 625 x 1350 mm (L x W x H) Condition: - Used in a professional QC laboratory - Fully operational - Annually maintained and calibrated Tjdpfxszxgtxe Afweb - Last calibration: October 2025 Included: - PC with licensed software (Spark Analyzer Pro MAX) - Analytical programs (Fe, Al, Ti, Cu, Ni) - Accessories (wire adapters, spark stand, ceramic discs, etc.) - Ready for immediate use Delivery: costs to be determined (EXW) Reason for sale: Optimization of laboratory capacity

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 Tjdpfx Afsy R A Apowsb x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: 1 Zoom 90 R 5'' Robotic Total Station with WinCE AiM360, TRack360, and Scout360, 5", accXXess10 EDM 1000M, 1 Long-range Bluetooth handle 500m, 1 Manual in French or English, Todpfxszq Hu Hj Afweb 2 Li-Ion 4.4Ah batteries, 1 Li-Ion battery charger, 1 Lead-free optical plummet, 1 Industrial-grade SD card, 1GB, 1 Notebook holder, 1 360° prism, 1 Touchscreen tablet, 1 X-Pad topographic software included. Calibration certificate. Suitable for Civil Engineering, Surveyors, Topographers, and Construction. The Zoom90 robotic total station is an ultimate single-operator system, offering up to 20% more automated performance, extended non-prism measurement capabilities up to 1000m, STReAM360, accXess technologies, and open Windows CE connectivity. OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software programs. Full VGA color touchscreen, guaranteeing optimal performance and graphic capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #CivilWorks #ConstructionSite #LaserScanner #Mapping

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Todpjzx Dwnsfx Afwsb Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx

Condition: used, Year of construction: 1995, Number of belts: 2 Max. working width: 920 mm Min. working height: 3 mm Max. working height: 160 mm 1st belt: Calibrating roller Design of 1st roller: Grooved steel roller Abrasive belt length 1st unit: 1525 mm Abrasive belt width 1st unit: 930 mm Abrasive belt speed 1st unit: 16 m/sec 2nd belt: Combination unit Design of 2nd roller: Grooved rubber roller Sanding shoe 2nd unit: rigid Abrasive belt length 2nd unit: 1525 mm Abrasive belt width 2nd unit: 930 mm Todpfx Aozxt Agofwsb Abrasive belt speed 2nd unit: 16 m/sec Material thickness measuring device: Yes Fixed feed rate: 4.5 + 9 m/min Control: Hand control panel Elec./pneumatic belt oscillation: Yes Infeed height: variable (lower table moves) Table stroke: electro-motoric Table display: mechanical digital display Operating pressure: 6 bar Weight approx.: 1100 kg Motor power: 11 kW Extraction diameter: 200 mm Storage location:

Condition: excellent (used), SELO Linear Scalder – Stainless Steel SELO industrial linear scalder, designed for the continuous thermal treatment of food products through scalding, especially suitable for fruit and vegetable processing lines. The equipment allows the product to undergo a controlled thermal treatment for a specific period before subsequent operations such as cooling, IQF freezing, preservation, or packaging. Scalding is commonly used to inactivate enzymes, condition the product, and stabilize its characteristics before the next stages of the process. Its linear configuration, continuous conveying system, and predominantly stainless steel construction allow for integration into high-production industrial lines. MAIN FEATURES -Manufacturer: SELO -Type: Industrial linear scalder -Application: Thermal treatment of food products -Automatic and continuous process -Internal product conveying system -Controlled dwell time -Uniform thermal treatment -Continuous feeding and discharge -Circulation/distribution system for the heating medium -Predominantly stainless steel construction -Longitudinal process chamber -Robust industrial structure -Top access for inspection and maintenance -Designed for continuous industrial operation -Integrable into automatic processing lines PROCESS The product is continuously fed into the SELO scalder and transported through the thermal treatment zone. During its passage, it is subjected to controlled temperature and residence time conditions, allowing for uniform scalding before discharge. Once the treatment is complete, the product can be directly transferred to a rapid cooling stage, avoiding unnecessary prolongation of the thermal effect and preparing it for subsequent processes. It can be integrated with: Product washers Slicers and dicers Conveyors and elevators Feeding systems Linear coolers Draining systems IQF freezing tunnels Weighers and dosers Fillers and packaging machines APPLICATIONS Especially suitable for fruit and vegetable processors, frozen food manufacturers, canneries, and prepared food plants. Depending on the configuration and process conditions, it can be used for peas, green beans, carrots, potatoes, corn, broccoli, and other vegetable products that require a scalding treatment before processing or preservation. Tedpfozxwvdex Afwjb The combination of SELO technology, continuous linear operation, and industrial construction in stainless steel provides a robust solution for professional vegetable thermal treatment lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Tsdpjyhcabjfx Afwjb Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Veeco Dektak 8 Tjdpfxowr A Smo Afwjb Working condition and calibrated

Condition: ready for operation (used), Year of construction: 2018, operating hours: 500 h, travel distance X-axis: 800 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, number of axes: 3, This 3-axis Wenzel LH 87 CMM machine was manufactured in 2018. It features a measuring range of 800 mm in the X-axis, 1,500 mm in the Y-axis, and 700 mm in the Z-axis. The machine is equipped with advanced software modules, including WM Quartis GEO and WM Quartis SCAN, ensuring high-quality measurement capabilities. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 87 CMM machine we have for sale. Contact us for further details. • Software: WM Quartis R2021-2 • Control Unit Model: WPC 2040 Tedpfxezmxm To Afwsb • Control Type: Type 1 • Control Software Version: 31.46 • Controller Date: 05.07.2018 • PMAC Version: 1.945 • Probe Head: Renishaw PH10M-PLUS • Scanning Probe: Renishaw SP25M • Probe Change Rack: Renishaw FCR25 • Probe Module: SP25M • Hand Controller: WENZEL HT400 • CAD Interface: STEP • CAD Interface: IGES • CAD Interface: VDA-FS • Software Module: WM Quartis GEO • Software Module: WM Quartis SCAN • Software Module: WM Quartis SURF • Software Module: WM Quartis CURVE • Software Module: WM Quartis EMD • Software Module: WM Quartis IMPEX-ELEM • Software Module: WM Quartis PRC • Calibration Certificate: Available • Calibration Label: 2024 • Last Calibration: 16.05.2023

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: type plate available, Nikon MCAx30+ 7-Axis Measuring Arm with H120 Laser Scanner – Complete System Nikon Metrology MCAx30+ | 7-Axis | 3.0 m | H120 Scanner | Year of Manufacture 2017 For sale: a Nikon MCAx30+ 7-axis measuring arm with an H120 laser scanner, manufactured in 2017. The system is in very good technical and optical condition and has been regularly maintained. Both the measuring arm and the laser scanner have current calibrations. Ideally suited for 3D metrology, quality control, reverse engineering, component measurement, CAD comparison, prototyping, and mobile 3D data acquisition. Tjdjzxz Ikjpfx Afwsb Equipment Nikon MCAx30+ 7-axis measuring arm Measuring range approx. 3.0 m Nikon H120 laser scanner FOCUS software Current calibration of the H120 scanner Transport case for measuring arm Separate transport case for scanner Probe 3 mm Probe 6 mm Reference probe Calibration sphere Calibration rod Calibration plate for the laser scanner Complete, ready-to-use system Condition The measuring arm and the H120 scanner are in very good condition. The system has been carefully handled and, due to the current calibrations, can be used immediately for professional measuring tasks. The MCAx30+ offers high flexibility in mobile 3D metrology thanks to its 7-axis kinematics and 3-meter measuring range. In combination with the H120 laser scanner, the system is suitable for both conventional tactile measurement and rapid, non-contact measurement of larger components. Thanks to the extensive accessories and the two transport cases, the system is offered as a complete measuring package. Inspection and functional testing are possible after prior arrangement. The system is preferably sold as a complete unit. If you have any questions about the equipment, software or technical condition, please do not hesitate to contact me.

Condition: refurbished (used), Year of construction: 2010, machine/vehicle number: SN214289, functionality: fully functional, Completely overhauled, electrical system renewed including conversion to thyristor technology, as well as installation of new controllers! -Maximum temperature 260°C Tedpoyxl Epefx Afwjb -Capacity 9000 liters -Nabertherm controller P 300 (9 programs, each with 40 segments) -HAS (High-Accuracy System), a highly accurate system for temperature control and documentation -Double door -Internal dimensions W x D x H 1500 x 3000 x 2000 mm -External dimensions W x D x H 2400 x 3860 x 2830 mm -Temperature limit selector -Thermocouple type K -Signal column -Access ramp, oven with bottom insulation, high temperature uniformity -Circulation rate 18000 m³/h -Power 93 kW -Documentation, CE -Electrically tested and with current DGUV test report The oven is calibrated according to DIN 17052 as of February 2025. This standard ensures that the temperature throughout the oven chamber is within defined tolerances. Suitable for applications such as heat treatment of metals or in additive manufacturing (3D printing) when processes that comply with standards are required. Inspection can be arranged at our warehouse at any time. We offer new and used industrial ovens, which we can also modify and expand according to customer requirements. Oven, furnaces, drying oven, industrial oven, drying cabinet, heat treatment oven, heat chamber, convection oven, chamber oven, heating oven, chamber convection oven, tempering oven, annealing oven, hardening oven.

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Tedpfjt Tqy Eox Afwob Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 2007, functionality: fully functional, ECRM MAKO 8 CTP — Specification | MAKO 8 Type | CTP 8-page Laser Technology | Violet 405 nm, single beam - 120Mw Compatible Plates | Violet photopolymer and silver halide Maximum Plate Size | 824 × 1,143 mm Minimum Plate Size | 254 × 254 mm Plate Thickness | 0.15 to 0.30 mm Resolutions | 1,800 to 3,556 dpi depending on the media Productivity | Up to 15 8-page plates/hour at 2,540 dpi Reported Repeatability | 0.025 mm typical over 6 consecutive separations Positioning Accuracy | ±2 µm with the Precision Drive System Image Scaling | 85 to 110% Workflow | TIFF 1-bit compatible via CtServer Output | Online connection to processor The machine therefore accepts a very wide range of formats, from 254 × 254 to 824 × 1,143 mm, which allows it to handle both small formats and genuine 8-page plates. Exposure/Mechanical Section The MAKO 8 uses a 405 nm violet laser. ECRM states that the single beam can be calibrated according to the sensitivity of the plate. The maximum resolution of 3,556 dpi also allows for the use of demanding screening techniques, including stochastic screening. The system is mechanically quite interesting: the plate is positioned on a pin-bar registration system and then moved under the laser head by the Precision Drive System. The documentation specifies a positioning control of ±2 µm. The registration system is interchangeable to accommodate notches corresponding to the presses used, which aims to improve plate/press registration and reduce setup time. Dimensions and Installation Width: 1,066.8 mm Depth: 2,448.6 mm Total Height: 1,892.3 mm Weight: 409 kg Power Supply: 100–240 V single-phase, 50/60 Hz Maximum Power Consumption: 250 W / 3 A Thermal Dissipation: 850 BTU/h Tedezxzm Tjpfx Afwsb Operating Temperature: 17 to 30 °C Relative Humidity: 45 to 65%, without condensation