Used Fibro Hydraulic Press for sale (25,564)

Condition: ready for operation (used), A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible. Hodpfsyxgr Rex Ab Tjt

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Hjdpfeum U Sxex Ab Tst

Condition: used, Year of construction: 1961, pressure 025 t Hedsxukpcepfx Ab Tjt table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm hole in the table 130 mm

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table. Hedpeyif Nrsfx Ab Tjt

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Hodpfenxk I Rox Ab Tet

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Hjdpfjlyr Adjx Ab Tjt

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Hjdpfx Aelc N Ryjb Tst

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Hedpfx Abslc N R Do Tet

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate. Hodpfx Asx Ehmyeb Tst

Condition: used, The SANDT Type 410 is for DIE-Cutting of difficult materials, particularly in the leather goods and printing industries, leather goods, cardboards and plastic. Schwenkarmstanze / hydraulic Clicking Press SANDT Typ 410 Serial-No. 760044 Stanzkraft / Pressure 22000kgs Stanzfläche / Die Cutting area max. 650 x 650mm Tischfläche / Cuttig Surface max. 550 x 900mm Hub 0 - 60mm Abmessungen / machine dimension 900 x 870 x 1400mm Gewicht / weight 840kg Hsdszukivopfx Ab Tjt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, pressing force: 160 t, table width: 1,250 mm, throat depth: 500 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Hodpfszucq Ejx Ab Tjt Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: used, Year of construction: 1967, total length: 2,000 mm, total width: 1,750 mm, total height: 2,850 mm, Colour: Grey Empty weight: 6.000 kg Hsdpfx Aezry Icsb Tet - Year: 1967 - Documentation available: No - CE certificate present: No - Serial number: 1166 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 740 - Table width [mm]: 500 - Ram length [mm]: 250 - Throat depth [mm]: 350 - Transport dimensions: 2000mm x 1750mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2023, total length: 1,400 mm, total width: 600 mm, total height: 2,180 mm, Colour: Blue Empty weight: 280 kg - Year: 2023 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: SA021 - Drive system: Conventional - Press force [ton]: 30 - Min. stroke [mm]: 0 - Max. stroke [mm]: 190 - Table length [mm]: 695 - Table width [mm]: 60 - Ram width [mm]: 60 - Max. opening height [mm]: 1000 - Height adjustment [mm]: 830 - Transport dimensions: 1400mm x 600mm x 2180mm (l x w x h) - Transport weight [kg]: 280kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hsdpfozry H Eex Ab Tot

Condition: used, TECHNICAL DETAILS Hjdpfx Ajuhai Rsb Tjt - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1200 x 1200 [mm] - Machine height : 2200 [mm] - Machine weight : 550 [kg] MACHINE HOURS - Working hours : 1070 [h]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 606 [h] - Lower extractor Hedpfx Abouhak Is Tst POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions (length-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 2290 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS Hodpfjuhak Uox Ab Tet - Dimensions ((ength-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] Hedpfx Abjuhakzo Tst - Number of working hours : 440 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS - Cutting strength : 1700 [daN] - Max. slide travel : 75 [mm] - Max. approach speed : 315 [mm/s] - Slide stopping time : 50 [ms] LOWER EXTRACTOR - Diameter : 16 [mm] SUPPLY - Supply voltage : 3x400 [VAC] - Frequency : 50 [Hz] Hedpeuhai Dsfx Ab Tot - Rated current : 5.5 [A] - Installed power : 2 [kW] FLOOR SPACE - Floor dimensions : 1300 x 1100 [mm] - Machine height : 1900 [mm] - Machine weight : 575 [kg] MACHINE HOURS - Working hours : 669 [h]

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS Hodpfx Ajuhakusb Tet - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Hodswhcmpjpfx Ab Tst Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. Hedezucxcspfx Ab Tet The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: used, Year of construction: 1999, Amada Promecam HFB 2204 8-Axis Hydraulic Press Brake (1999), Capacity 2200kN, 4000mm Bed, Maximum Stroke 180mm, Stopping Time 80ms, Stopping Distance 9mm, Machine Weight 16000kg. S/No. HFBO 220 40 H990103 (1999). Country of Origin: France Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Hsdpfx Abjzn Urzj Tot Please Note: This lot is located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm Hedpfx Aeztfbwob Tst -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Hodpfexhc Spsx Ab Tot Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Hodpogrkigofx Ab Tot Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.