Used Floor Grinder for sale (9,367)

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. Lrsdsy Sz Imopfx Akuel 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Ljdpfx Aksy S Rw Deusrl Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B Lsdjy Tprpopfx Akujrl workpiece length - max. 300 mm grinding wheel diameter 356 mm grinding wheel width 75 mm quill stroke 45 mm

Condition: used, Year of construction: 1986, grinding length . mm grinding width . mm workpiece height . mm Table 870x130 mm Lrjdpfoytx Ifsx Akusl total power requirement 2,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V total power requirement 14 kW Facing head Lrodpfeyuqc Rjx Akuel D.R.O.

Condition: used, spindle diameter 125 mm x-travel 8000 mm Lodpfx Ajyuqkuokuorl y-travel 3000 mm spindle bore 240 mm w-axis 1650 mm total power requirement . kW

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2023, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22,5, wheelbase: 9,060 mm, color: grey, Year of construction: 2023, Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF CD Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Lredpoy A Sdgjfx Akuel Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 100%; Tyre tread right: 100% Weights Unladen weight: 7,880 kg Payload: 34,120 kg Gross vehicle weight (GVW): 42,000 kg Maintenance APK (Technical Inspection): valid until 04.2027 Identification Registration number: OT-84-VV Further information Please contact Mark van der Steen for further details.

Year of construction: 2016, condition: good (used), Approx. 65 aluminum spring base trolleys, Gmöhling – used – : Price per unit ex location: only €450 (net) When purchasing 20 units or more: only €395 (net) / unit For entire batch purchase: only €350 (net) / unit Lrodpfx Akewxw Ddjujl Manufacturer: Gmöhling Model: unknown Year of manufacture: unknown, but no older than 2016 Height from ground: approx. 95 cm Length: approx. 1.11 m / Internal length: approx. 1 m Width: approx. 66 cm / Internal width: approx. 62 cm Including forklift pockets Spring force unknown, likely 70 kg 2 fixed casters and 2 swivel casters Continuous edge and bottom profiles to reinforce the container walls Elastic impact protection on the upper trolley frame provides effective protection for both trolley and contents Extremely robust and dimensionally stable Internal height: approx. 580 mm Volume: approx. 380 liters Finish: anodized Color: aluminum silver Net weight: approx. 48 kg Original price approx. €1,100 Condition: good Available: immediately Location: Unna

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA Lodpfx Aow E Npxokujrl weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: used, Cylindrical grinder cnc STUDER S11 Lrodpfx Akjy T Snyouel

Condition: good (used), liter capacity 1000 l Ljdpfoy Ty Arsx Akujrl range L-W-H 1460 x 1460 x 620 mm weight 180 kg External dimensions approx.: LxWxH 1460 x 1460 x 620 mm (height incl. 100 mm clearance height) Collection volume: approx. 1000 liters Net weight (painted) approx.: 180 kg Construction made of 3 mm sheet steel With galvanized grating (load capacity 1000 kg/m²) With support legs (100 mm clearance height) Transportable with pallet truck and forklift Suitable for flammable liquids in GHS categories 1-3 and for water-polluting liquids in GHS categories 1-4

Condition: excellent (used), Long-belt sanding machine PS300 - Table size 3000 x 800 mm - 380 Volts - Belt length 7800 mm - Electric table adjustment - Upper belt cover - Ott sanding table - 3 kW - Throat 550 x 220 mm - Weight: approx. 700 kg Lodpsy Tqw Hefx Akuorl

Condition: used, Lumsden 93 ML Vertical Spindle Rotary surface Grinding Machine, fitted with 60 inch dia magnetic chuck. Auto sizing. Table Guards, Coolant tank, with pump. Serial Number 93ML 60/11616. Option to be supplied with updated electrical controls, please contact for more details. Under power ready for immediate supply. Ljdoy N Ultjpfx Akuerl

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. Lrodjxplxzepfx Akusl CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Year of construction: 2024, condition: like new (used), 4x lifting devices for floor rollers for in-plant transport, Bloksma – never used –: Price per unit ex-works: €1,950 (net) Lodpfjyzczgex Akuorl Manufacturer: Bloksma Accessory: lifting device Year of manufacture: 11/2024 Model: G4-HET-FVBEP-200 Part number: 210926A19554 Serial number: H-26277 Dimensions: L435 x W280 / GOK 935 Electric lifting device G4 Model HET-F Design: semi-mobile Loading direction: front loading Load capacity: 200 kg Lifting speed: 31 mm/sec Load handling equipment for BLOKSMA floor rollers BOF + BOZ For floor roller sizes: 600 x 400 mm + 630 x 430 mm Insertion direction: transverse Control: electric, 230 V / 50 Hz 250 kW, 16 A Motor with spindle drive Control element: detachable control panel Height detection: sensor-based height detection for single-piece closed containers GOK approx. 935 mm Color: Base frame RAL 9010, cover RAL 4006 Former new price: approx. €4,000 / unit (net)

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) Lredpsyrlcgofx Akuol 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. - External and internal cylindrical grinding Lrjdpfx Asxqgi Dskusl - Surface grinding - Tool grinding - Hydraulic table feed - Extensive accessories

Condition: excellent (used), Freight elevator over 3 floors. Lödige, 800kg, for installation on a hall floor (without pit) - second-hand: Price ex location: 13.500.-€(net) plus dismantling! Manufacturer: Lödige Lrsdotu H Tiepfx Akuol Model: Sherpa Type: MSK 16 Year of construction: 2020 Serial number: 746 97056 Total height approx. 8m Basic dimensions: width approx. 2.38m, depth: approx. 2.18m Load capacity: 800kg Maximum loading height: 2m Cabin dimensions: approx. 2 x 2 x 2m No passenger transport allowed! Level: Floor 0cm First level: approx. at 2.70m Second level: 5.30m The first level is currently at approx. Condition: very good Available: immediately Location: Frankfurt a.M. area Manufacturer's description: Space-saving use - simple assembly The self-supporting steel scaffolding shaft with sheet metal lining is supplied complete. The shallow pit depth of 70 - 150 mm can be completely dispensed with by using a drive-on wedge. A machine room is not required. This means that the SHERPA goods elevator can be integrated into existing buildings or racking systems in the shortest possible time without extensive modifications. Installation is therefore quick and easy.

Condition: used, Surface grinder MAEGERLE MFP-125-35 Lodpfx Aoy Tzcmjkuerl

Condition: used, axle configuration: 3 axles, first registration: 09/2016, next inspection (TÜV): 02/2027, loading space volume: 89 m³, Year of construction: 2016, Equipment: ABS, Reisch 3-axle sliding floor semi-trailer Lrjdpey Trx Sjfx Akujl - Volume: 89 m³ - Tires: 385/65 R 22.5 - Jost geared landing gear - SAF axles - Disc brakes - 2-sided axle lift, controlled via EBS on the 1st axle with integrated start-assist system - Start-assist system can also be activated via 3 x brake pedal actuation - EBS braking system WABCO incl. RSS - ELECTRONIC air suspension WABCO with displacement sensor and electric lift/lower CONTROL BOX including RTR function from 15 km/h - PARTIAL LED module tail lights Easy Conn II! with LED brake/tail lights - Separate square LED reversing lights at the rear - PVC toolbox - Foldable protective cover for tail lights - Pull-out access ladder at the rear right - CARGO-FLOOR sliding floor type CF 500 SL-Compact for 21 floor profiles - Sliding floor profiles 6 mm thick - Floor profiles with aluminum end caps - Foldable lashing eyes recessed in the outer frame - Fixed standing platform on the front wall with access ladders on the left and right - Complete discharge wall - Additional pneumatic rear door locking - Steel round tube crossbar - PVC roll cover - Body in RAL 9006 white aluminum All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, empty load weight: 8,560 kg, maximum load weight: 27,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,515 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, total length: 13,575 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,210 mm, color: black, gearing type: mechanical, Equipment: ABS, Sliding floor trailer with side doors. Lease-purchase option without a down payment, monthly lease-purchase rate of €1,199. Term: 84 months. After the term expires, purchase at residual value, return, or exchange for a new vehicle. Full-service rental with the option of later purchase is possible. Sliding floor semi-trailer. Hydraulic connections on the front wall. Work platform with access. Extendable access ladder at the rear. Moving wall for complete emptying. Front wall made of aluminum profiles and a solid upper frame profile. Side walls made of aluminum hollow profiles 35*268. Aluminum double-wing door. Sliding floor system LEGRAS. Floor type 10 PVC. Roller cover tarpaulin with 3 removable crossbars. 4 tie-down straps with winches on the outer frame for securing the tarpaulin. Longitudinal straps under the tarpaulin. E-bike holder. Body design for E-bikes. Brake disc 430mm. E-bike charging sockets 2*7 + 1*15 pole. Folding rear light cover. Rubber rear mudflap on the U-profile. Aluminum rims, and more. Lrodpfx Akowmr Exjuel Ask about our affordable lease-purchase or leasing offers. Our general terms and conditions apply. Subject to prior sale. Prices quoted are plus applicable VAT of 19%. Financial services offers are subject to a positive credit check and are only valid for GERMAN commercial enterprises. Further information is available at [website address]. Available for rent, container doors, disc brakes, aluminum floor, SAF axles, toolbox, side door, lift axle, double doors, partition, order vehicle, rental possible, alloy wheels, new MOT/emission test, other equipment available.

Condition: used, empty load weight: 8,020 kg, maximum load weight: 30,980 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2018, total length: 14,040 mm, suspension: air, tire size: 385/65R22,5, color: black, Year of construction: 2018, gearing type: mechanical, Equipment: had accident, LEGRAS FMA sliding floor semi-trailer with unrepaired damage on the front left and rear right side (see photos). For further information on the vehicle offered, please request a detailed quote. Inquire about our favorable lease-purchase, leasing, or full-service rental offers. Our general terms and conditions apply. Subject to prior sale. Financial service offers are subject to a positive credit check and are only valid for GERMAN commercial enterprises. Further information is available at [website address], aluminum floor, SAF axles, tool box, lift axle, wing doors, export vehicle, first owner. Ljdpfx Ajxyzzmekusrl

Condition: used, maximum load weight: 28,170 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2020, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,750 mm, loading space volume: 91 m³, Equipment: ABS, Stock no. 5833 Approx. 91 m³ Carnehl Moving Floor Semi-Trailer with Remote Control ---- * Manufacturer: Carnehl * Type: CS/AL - Moving Floor * First registration: 02/2020 * Gross vehicle weight: 36,000 kg Lrjdpfx Ajy Sq Ucskujl * Unladen weight (according to registration): 7,830 kg * Payload: 28,170 kg * Axles: 3 x SAF with 1st axle as lift axle / disc brakes * Suspension: Air suspension with lift and lower function * Tyres: 385/65 R 22.5 approx. 50% on steel rims * Colour: White / Blue * EBS Wabco * Volume: approx. 91 m³ (13.50 m long x 2.475 m wide x 2.75 m high) * Remote control * Swing doors with pneumatic locking * Side protection tarpaulin * Roll tarpaulin with tension belts * Front operating platform with left and right access * 5 folding tarpaulin stops * Service door front left * 3 crossmembers * Toolbox rear right * 2 LED work lights * LED reversing lights * LED tail lights with aluminium protection plates * Shovel and broom holder left * Additional hydraulic connections in front of the supports * Full load supports * Single mudguards * Wabco Air Suspension Control box * Moving bulkhead with floor sheet * Folding "A" sign at the rear * 1st owner German trailer!! German documents!! 1st hand!! Note regarding possible errors in the advertisement: Despite careful preparation of this advertisement, errors may occur in the text or the specifications given. We assume no liability for mistakes, alterations, or prior sale. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Lrjdjud At Ropfx Akujl

Condition: good (used), I sell Fein MSfv 649 Angle grinder with long neck. In bdb condition Lrodpfx Ajuhm I Hskuel