Used Fom Industrie Corner Crimping Machine for sale (85,725)

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Dsdpfx Ajyy S Uaed Njcg Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Dodpfx Aeyx Hpiod Necg Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Dedpfsyza Dfex Ad Necg

Condition: used, functionality: fully functional, machine/vehicle number: D40L/8219, Offer Number: D40L/8219 Machinetype: crimping machine Make: WAFIOS Type: K70S Dcedowi Thajpfx Ad Nog Constr. year: wire diameter: 1- 5 mm speed - meter/min: ca. 15 Location: In our warehouse

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, following company liquidation. Dedpfx Adsyl Sarj Nscg

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 Dedpfeyghn Iex Ad Necg • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant • Application: film, paper and packaging materials

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 301-207-145, HCI FSC-201 industrial cutting machine for sale Industrial HCI FSC-201 cutting machine for sale. Taiwanese manufacture, solid and reliable construction, suitable for precision cutting of films and packaging materials. Key features: • 3-phase / 380 V / 50 Hz Djdpfsyghixox Ad Nscg • 4.4 kW total power • 1 HP main drive • Approx. 800 kg machine weight • Pneumatic system (6–8 bar) Designed for industrial use, stable and durable machine.

Year of construction: 1994, condition: ready for operation (used), ROTOX corner cleaning machine Year of manufacture 1994 machine no.: 2776301 incl.turning station WT 420 with corresponding table!!! table size 2000x5800 mm foldable to 1500x5800 mm Djdpfx Ajd Ntfvsd Nscg

Condition: new, Year of construction: 2026, neu 2026 090202 Djdpfewirx Dsx Ad Nocg Mai 2026, Zwischenverkauf Türkei 3100 € 1.2 mm 100 mm 140 nm 8 Stk. 62 mm 0.75 kW 32 1/min 900 mm 450 mm 1350 mm 135 kg Haevy duty cast iron main frame Brake motor Foot pedal Adjustable lower roll 8 set of rolls Complete with stand User manual in ENGLISH or GERMAN

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges Dsdpox Hyhbofx Ad Njcg • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: new, Year of construction: 2026, MBM series machine Dedpowf Hghsfx Ad Nscg • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU)

Condition: used, functionality: fully functional, machine/vehicle number: 01/126/ANSP, overall weight: 120 kg, water consumption per time unit: 140 l/min, inner diameter: 800 mm, inner dimension height: 500 mm, input voltage: 400 V, input frequency: 50 Hz, reception height: 500 mm, input current: 16 A, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), power: 6 kW (8.16 HP), load capacity: 150 kg, Industrial Parts Washer GEORG RENDER W 80 in used, fully operational condition. This machine is ideally suited for cleaning metal parts, components, and assemblies in industrial manufacturing and maintenance. The unit features a sturdy washing chamber with an internal diameter of approximately 800 mm and a usable internal height of around 500 mm, enabling efficient and uniform cleaning even of complex workpieces. Dcodpjyw R Itefx Ad Nog The machine operates with an electrical connected load of approximately 6 kW and is designed for use with 400 V three-phase current. The integrated heater (approx. 4 kW) enables cleaning temperatures up to about 65°C, ensuring effective removal of oils, greases, and contaminants. Water consumption is approximately 140 l/min. The maximum load capacity is about 150 kg. The machine weight is approximately 120 kg. The system is robustly built, maintenance-friendly, and ready for immediate use. Ideal for workshops, production facilities, and industrial applications. Viewing under power possible by appointment.

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Dsdpfx Asyxdl Iod Necg

Condition: new, Year of construction: 2026, Very robust, high-quality beading and flanging machines in heavy cast construction with electric motor drive – brand new. Dedpfxjyxxf Ae Ad Necg Optionally available with: - Hydraulic bending roll adjustment - Circle cutting device Maximum sheet thickness that can be formed = 3 mm steel sheet / S235JR, depending on roll configuration Throat depth in machine frame: 450 mm Maximum distance between upper and lower roll: 100 mm Two working speeds: 6 and 33 rpm Available at extra cost with steplessly adjustable working speed and frequency converter Time relay for limiting the working cycle Drive power: 1.8 kW Hydraulic drive power: 1.5 kW Weight of basic machine: 570 kg When used as a circle shear (option): Blank diameters from 300 mm to 1,200 mm (optionally up to 1,620 mm) Cutting capacity with shear blades: 3 mm steel sheet / S235JR Weight of machine with circle cutting equipment: 730 kg

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Fully renovated machine for pitting sour cherry The machine has a power consumption of 2 kilowatts per hour. Water consumption is 0.5 cubic meters per hour. Operating speed: 40 cycles per minute. Dimensions: Width: 1700 mm, Length: 2400 mm, Height: 1800 mm. Weight: 1240 kg. Six-pronged needle size: 8.5 mm diameter, 150 mm long. Output: 450–500 kg/hour of cherries. If the plates are replaced, the machine can be used to pit plums and apricots. The pitting machine features a very sturdy construction based on solid steel profiles. The plates are made of a special high-molecular-weight plastic compound resistant to acidic environments. Dsdpfeyzghkjx Ad Nscg

Condition: excellent (used), YUKI INDUSTRIAL SEWING MACHINE with 4 threads, cord sewing machine, with table and air assistance during operation. IN MINT CONDITION. Dodod Swvuspfx Ad Necg

Condition: new, Ostas Beading Machine KMRP 2.5 Includes 4 Tool Sets Dodpfx Ajytb I Ujd Necg Features • Main body made of steel • Main motor with reduction gearbox • Shafts with bronze bearings • Adjustable lower shaft • Specially hardened shafts • Forward and reverse movement of the lower shaft • Movable electric foot pedal • Supplied with 4 sets of rollers Technical Specifications: • Shaft length: 250 mm • Bending capacity: 2.5 mm • Roller diameter Ø: 98 mm • Throat depth: 160 mm • Motor speed: 5 m/min • Motor: 1.5 kW • Dimensions (L-W-H): 1400 x 550 x 1120 mm • Weight: 350 kg

Condition: used, Year of manufacture: 2011 Automatic cleaning machine for PVC profile corners, equipped with lateral support arms. Dcjdpeywu A Iefx Ad Neg automatic cycle upper/lower units for corner cleaning Machine in working condition, regularly maintained, complete with manual.

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Dedpfxsx Nd U Dj Ad Necg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07758, We offer this Tonello 70 L1 ECOFREE 2 industrial washing machine in very good condition, year of manufacture 2018. Brand: Tonello Dcedpfx Aoyt Hcwod Nsg Model: 70 L1 ECOFREE 2 Year of manufacture: 2018 Condition: very good Category ID: 2065 Type ID: 1018 Type: industrial washing machine If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 8340120611, The tools on the machine are for Kommerling PVC profiles. Dcodpfx Aeyviarod Nog

Condition: new, Year of construction: 2025, HEAD CORNER ROUNDING MACHINE MAGRAF RA-1 Djdpjkx Hp Eofx Ad Nscg

Condition: ready for operation (used), Techmaflex Scrimp 350 Hose Crimping Machine Crimping Range: 4-130mm Opening with dies: +54mm Crimping force: 350 t Opening without dies: 180mm Jaw base length: 115mm Dimensions: 765mm x 400mm x 750mm Weight: approx. 262 kg You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! Dodpfx Aeyrd Nfod Njcg You will receive a proper invoice. For international customers, a net invoice can be provided (requirement: valid VAT ID number). Subject to prior sale. Visit our shop and check out our other offers. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the description of the item are possible and reserved.

Condition: used, Rotox corner processing machine Djdpfeylipkex Ad Nocg

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, workpiece height (max.): 10 mm, operating speed: 50 mm/s, TECHNICAL DETAILS Minimum processing size: 100 mm x 400 mm Processing thickness: 2 - 10 mm Maximum speed: 3 m/min MACHINE DETAILS Power: 45 kW DIMENSIONS Dimensions of the enclosure (L x W x H): 6,260 x 1,280 x 1,750 mm Dsdpfx Adoyk Sgij Necg Dimensions of the control cabinet: 1,000 x 480 mm