Used Food Tools Cs4Aac for sale (50,774)

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: INOX 99L, total length: 550 mm, total width: 450 mm, total height: 400 mm, overall weight: 100 kg, Ultrasonic cleaning is a gentle cleaning method based on intense cavitation caused by ultrasound. The microscopically small cavitation bubbles created on the surface of the object to be cleaned cause powerful pressure shocks that effectively remove all contaminants not belonging to the object without damaging the object itself. Ultrasound removes dirt, grease, and impurities from many places that are impossible to reach with other cleaning methods, such as bores, cavities, and channels. Because of this, it is perfectly suited for items that are nearly impossible to wash. Using ultrasound, you can clean engine parts, electrical components, diesel injection pumps, motorcycle radiators, hospital equipment, chemical industry equipment, differentials, motorcycle crankcases, engine cylinder heads, bicycle gears, weapons, and their parts. In addition, it can be used to clean any items made of rubber, glass, metal, ceramics, or electronics. However, make sure it is suitable before washing, e.g., eyewear. Njdpfx Ae Afp Upoi Tjwn To achieve a good cleaning result, we recommend using a specially designed cleaning solution in the machine. The liquid can also be just water and a little dish soap (e.g., Fairy) or another suitable solution. As a cleaning fluid, you can also use vinegar, heating oil, hydraulic oil, solvent cleaners, etc. The process can be accelerated further by raising the temperature of the liquid. Features: • LED display for temperature and time • Stepless adjustment of ultrasonic power • Built-in generator • Wheels underneath for easy movement • Drain valve for the tank Technical information: • Ultrasonic frequency: 28 kHz • Ultrasonic power: 480-1500 W • Heating power: 3000 W • Temperature adjustable between: 20-95 °C • Timer digitally adjustable between: 0-99 min • Tank size: 550 x 450 x 400 mm • Tank volume: 99 l

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, Nsdpfxjq R Tnze Ai Tjwn spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Spindle taper BT40, 16 station ATC, swarf auger.

Condition: new, Year of construction: 2022, Celsius Food food-grade baking oven Nwjdpfx Aiexu Rk Tj Tjn Baking temperature range: 50 to 260 degrees Ref: ConduVec 12.10 E The oven has never been used and is still in its original packaging.

Condition: good (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 88-009-01, overall weight: 600 kg, Grinding machine by Jungner, model US-350, including cabinet with accessories – see images. Nsdj Afnd Ajpfx Ai Tewn

Condition: used, Year of construction: 1979, functionality: fully functional, Ideal for sharpening lathe tools, drills, milling cutters, and other tools – a classic product of German engineering for ambitious hobbyists or workshop use. Technical specifications: • Motor No. 10651 • Power: 0.55 / 0.92 kW • Speed: 1400 / 2800 rpm • 380 V, 50 Hz • Cross slide with handwheels, swivel head with clamping device • Bellows covers for the guides Nedpfx As Afp Ensi Tswn • Incl. work light Please feel free to contact us if you have any questions!

Condition: like new (used), Year of construction: 1997, functionality: fully functional, KUIPERS FOOD PROCESSING ID.NO. 2824 Kuiper's reliable conveyor belt made entirely of stainless steel can also be adjusted to adjust the inclination of the belt. H in 115 cm H out 185 cm. Band width 49 cm Nwsdpfxsu Iw Umj Ai Ten Dimensions 186 x 80 cm Height 200 cm.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Nodpfx Aoxl Tnpsi Tswn

Condition: used, Year of construction: 1991, functionality: fully functional, Equipment: rotational speed infinitely variable, Tool grinding machine Manufacturer: DECKEL, Type: S 11 Year of manufacture: 1991 Nwsdpfxj Afyq Ie Ai Tjn Technical details Manufacturer: DECKEL Type: S11 Year of manufacture: 1991 Clamping area: 500 x 180 mm Max. tool diameter: between centers 130 mm, with overhanging clamping 620 mm Max. tool length: between centers 270 mm Grinding stroke: 190 mm longitudinal Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Spindle speed: 2,000 to 10,000 rpm, continuously adjustable Drive power of the grinding motor: 1.1 kW Total power consumption: approx. 2.2 kW Connection voltage: 400 V / 50 Hz Max. grinding wheel diameter: 125 mm Workpiece spindle mounting: SK 40 T-slots: 12 mm on the machine frame Machine weight: approx. 850 kg Dimensions: L 1.60 x W 1.10 x H 1.60 m Equipment • 5-axis adjustability • Motorized height adjustment of the grinding head • Opto-electronic measuring system with 2-axis digital display • Very large range of accessories as shown in the photos • Technical documentation All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg Nsdpevki A Rsfx Ai Tjwn 8 St. Tool trolley filled Contents and equipment see pictures

Condition: new, File set L. 300 mm, cut 1, 2K-Ergo PFERD Nwedpfx Ae Ab D Tlei Ton · with ergonomic file handle · made of high-quality steel · in a roll-up case made of plastic · Contents: flat, triangular, square, half-round, round · Other technical features: Contents: 5-piece set · Handle: 2K-Ergo Contents: 5-piece set Cut: 1 Length: 300 mm

Condition: new, File set L. 300 mm, cut 2, 2K-Ergo PFERD · with ergonomic file handle · made of high-quality steel · in a roll-up case made of plastic · contents: flat, triangular, square, half-round, round · additional technical features: contents: 5 pieces Njdpfxj Ab D Trs Ai Tswn · handle: 2K-Ergo Contents: 5 pieces Cut: 2 Length: 300 mm

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Nsdpeu Impyjfx Ai Town Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - Lath hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Njdjywg Rdepfx Ai Tswn Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers suitable for long tools / reamers & deep-hole drills, etc. - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm Nwsdpfxs Afdgto Ai Tsn - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm - Empty weight: approx. 450 kg Errors and omissions excepted.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: Nwodpfxszb Rbto Ai Ton 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg Njdpfx Asu Imp Toi Tswn 8 St. tool trolley with tool set 272 pieces. See pictures

Condition: refurbished (used), Meat processing line to produce a coarse sausage mix / burger mix / pet food line Taking a tempered frozen meat block into a Guillotine Giraffe feed up into a mincer, Mincer to coarse mince flaked meat Incline conveyor taking minced meat through a 10 mm to 16 mm hole plate Minced meat transferred by the conveyor into the Mixer Grinder Add seasoning / water etc to complete the recipe Mix in the mixer grinder for 3 to 5 minutes Mince out through a 5 mm to 8 mm hole plate into a tote bin. Ruhle Guillotine Scansteel Giraffe Feeder Laska WW 130 2 Cross feed Mincer Incline conveyor Thompson 4000 Mixer Grinder Nwedpozl Tb Nefx Ai Ton Product ready for the next stage vacuum filler / tray depositor / burger former etc

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Please Note: This Lot is located in Birmingham, UK. Nsdpfx Aij Afwlqo Tswn

Condition: new, Grinding wheel COMBIDISC D.38mm K.80 Forte 16000min-¹ PFERD · Corundum A-Forte · For universal use, from coarse to fine grinding, with high material removal rate and service life Nwodj Ab Efcopfx Ai Ten · Other technical features: Design: Forte Diameter: 38 mm Max. speed: 25000 min-¹ Grit: 80 Recommended speed: 10000 - 16000 min-¹

Condition: new, Abrasive disc COMBIDISC D.50mm K.80 Forte 13000min-¹ PFERD · Corundum A-Forte · For universal use, from coarse to fine grinding, with high material removal rate and service life · Other technical features: Design: Forte Nwodpfo Ab Efpsx Ai Tsn Recommended speed: 8000 - 13000 min-¹ Grit size: 80 Diameter: 50 mm Max. speed: 19000 min-¹

Condition: new, Cut-off disc SG ALU D230x2.9mm, bore 22.23mm, PFERD · For universal cutting of aluminum and other non-ferrous metals, offering high cutting performance and maximum service life. Nsdpfs Ab Eaajx Ai Tewn · Suitable for cutting sheets, profiles, and solid materials. · Contains no fillers that leave undesirable residues on the workpiece, allowing for direct weldability of the surface. · Bore: 22.23 mm Ø · Other technical specifications: max. speed: 6600 min-¹ Shape: straight Disc diameter: 230 mm Bore: 22.23 mm Disc thickness: 2.9 mm

Condition: new, Cut-off wheel SG STEEL D230x2.9mm, bore 22.23mm, PFERD · For processing steel with high cutting performance and maximum service life · For cutting sheet metal, profiles, and solid materials · Bore: 22.23 mm Ø · Other technical features: max. speed: 6600 min-¹ Shape: straight Disc thickness: 2.9 mm Njdpfx Aie Ab Eago Tjwn Disc diameter: 230 mm Bore: 22.23 mm

Condition: new, COMBIDISC grinding disc D.38mm K.60 Forte 16000min-¹ PFERD · Corundum A-Forte · For universal applications, from coarse to fine grinding, with high material removal rate and long service life · Other technical features: Design: Forte max. speed: 25000 min-¹ Njdpfj Ab Ed Sox Ai Tswn grit: 60 Ø: 38 mm recommended speed: 10000 - 16000 min-¹

Condition: new, Abrasive disc COMBIDISC D.50mm K.60 Forte 13000min-¹ PFERD Nwodpfo Ab Efiex Ai Ton · Corundum A-Forte · For universal use, from coarse to fine grinding, with high material removal rate and service life · Further technical features: Design: Forte Recommended speed: 8000 - 13000 min-¹ Grit size: 60 Maximum speed: 19000 min-¹ Diameter: 50 mm

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Nedpfx Aiszz S Rne Tjwn Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.