Used Fpt Industrie Sirio M40 for sale (26,284)

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510444, Technical parameters: • Manufacturer: Jeumont Industrie • Type: JISALT 420 • Serial number: 510444 • Apparent power: 14 MVA • Voltage: 15 kV • Stator current: 539 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 98 V • Excitation current: 454 A • Excitation with rotating diodes (brushless) • Water cooled Podpfsy D Hrzsx Ag Djgk • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of the stator and rotor performed in 2023. Values and conditions were good, but factory inspection recommended. Without control and protection system!

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: fully functional, machine/vehicle number: 510445, Gas turbine (GT) generator Technical parameters: Pgjdpfx Agoy D Hp Ts Dok • Manufacturer: Jeumont Industrie • Type: JISALT 460 (1999) • Serial number: 510445 • Apparent power: 60 MVA • Voltage: 11.5 kV • Stator current: 3012 A • Frequency: 50 Hz • Rated speed: 1500 rpm • Power factor: 0.8 • Excitation voltage: 259 V • Excitation current: 617 A • Excitation with rotating diodes (brushless) • Air cooled • Insulated bearing shells on both (TE, EE) sides • Operating hours: 76,000 hours Last diagnostic inspections of stator and rotor performed in 2023. Values and condition were good, but factory inspection recommended. Without control and protection system!

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Pedpfx Aewrz Dbsg Degk Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm Pgodpfjx Ru Azjx Ag Dok VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, Height-adjustable workbench HANDKE Industrial Technology Height-adjustable workstation, work table, electric workbench Table length: 1100 / 1700 mm Table depth: 600 mm Foldable table length: 600 mm Working height: from 830 to 1200 mm - Tabletop coated with melamine resin: 40 mm - Tabletop with hydraulic lift system - Height adjustment via hydraulic pump with hand crank - Sturdy base frame made of aluminium system profile - Mobile with 4 large castor wheels (swivel castors) - Rear panel with standard square perforation - 1 drawer compartment W x D x H = 675 x 210 x 80 mm - 1 cabinet base unit W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Pgodpfx Aeitv Nveg Dsk Weight: 90 kg Very good condition, as new 2 units available Price per unit

Condition: new, 🧰 Product Features • Condition: new • Colour: grey • Volume: 650 l • Load capacity: 4000 kg (at 5°C ambient temperature) • Dead weight: 43 kg • Length: 120 cm • Width: 100 cm • Height: 78 cm • Stackable: Yes • Dimensionally stable: Yes • Special features: suitable for racking storage, liquid-tight, optional drain valve 💰 Price €155 net, excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Pgodpfxehvrk Tj Ag Dok Always over 5000 linear metres of pallet racking from numerous manufacturers in stock (Specifications, information and prices subject to change and errors excepted. Intermediate sale reserved! Please see our T&Cs. All prices excl. VAT, ex warehouse.)

Condition: used, Year of construction: 2014, Manufacturer : Alliance Inox Industrie Type: Vertical cylindrical stirred tank Year : 2014 Useful capacity: 3,000 litres Material : 304 L stainless steel Operating temperature: 20 to 60°C Agitation: 2 three-bladed impellers, 100 rpm Engine power: 10 kW ATEX class: Ex zone II T3 ext   Jacketed : 837 L Pressure: 1.5 bar Heating: 2 x 4.5 kW immersion heaters PT100 temperature sensor: inside the tank Sonde de température PT100 : Jacket   Empty weight : 2000 kg Dimension : Ø 1563 x 4831 mm Pedpfx Ajyvv A Teg Dsgk Central drain DN63   Motor checked and tested prior to sale. Drawing available on request

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Pgedpfx Agoyylike Dsk Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: F2CE9687A*E, power: 260 kW (353.50 HP), fuel type: diesel, number of cylinders: 6, cubic capacity: 9,000 cm³, nominal power: 260 kW (353.50 HP), rotational speed (min.): 2,100 rpm, rotational speed (max.): 2,100 rpm, type of cooling: water, 2 units of FPT/Iveco diesel engines, model C87 ENTX20.00 / F2CE9687A*E / 260 kW (353 hp) at 2,100 rpm, NEW, for sale! Perfectly suited for use in harvesters, construction machinery, municipal vehicles, and firefighting applications (sprinkler systems). Additionally: 1 unit FPT/Iveco diesel engine N67MNTF41, 190 kW/258 hp at 1,900 rpm, in near-new condition, 6 cylinders, air/water intercooling, without front radiator and fan. Price upon request! Subject to printing errors and omissions! Pgodjyw Uamjpfx Ag Dok

Condition: used, Year of construction: 2014, In excellent condition, ready to use immediately Pedpfxeywhd Ee Ag Degk

Condition: ready for operation (used), Year of construction: 2011, table width: 3,050 mm, total height: 3,005 mm, product length (max.): 8,388 mm, This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Current: 53 A • Frequency: 50 Hz • Laser type: CO₂ laser • Laser power class: approx. 3000 W • Laser ON time: 56739 h • HV ON time: 52613 h • Beam ON time: 38740 h • Shutter open time: 39057 h • Shutter cycle counter: 226839 • Vacuum pump ON time: 56729 h Pgsdpfeynk A Rox Ag Djk • Vacuum pump oil change time counter: 718 h • Turbine ON time: 14118 h • Turbine maintenance time counter: 5157 h

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Psdpfof Nku Rjx Ag Degk Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. On the last three photos you can see plants of this design in operation.

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Pgodpfx Agewurq Re Dsk All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Pgsdpowurqkofx Ag Dsk Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 7,000 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, spindle speed (max.): 18,000 rpm, Equipment: documentation/manual, Aluminum profile processing and cutting line – Mutlimandrino /LMT 2P - LH/ Short description: Fast and precise work, thanks to 2 feeding "hands" /grippers/. One - to the milling station /Multimandrino/, the second - to the cutting station, with a 550mm disc. Technical characteristics: - Management and control software – FOMCam - Possibility to enter cutting in .xml format /P2K2/ - Disc 550mm – with electronic positioning - 12 pcs. spindles with a power of 3.3 kW, for work on 4 sides of the profile, including 1 pc. tilting - Maximum profile size – 200 x 200mm - Profile rotation system from 0-90* - Maximum bar length – 7000mm - Working direction – LH /left/ - profiles are fed from the right to the left side - Feeding table with a capacity of 18 bars - Unloading of finished positions – manually - Industrial label printer NOTE: A gift to the Line is an “Automatic warehouse” for finished positions!!! Functional Pgsdpfxsv Ucbno Ag Dsk

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 450 kg, lifting height: 8,000 mm, overall weight: 2,830 kg, empty load weight: 2,830 kg, fuel type: electric, tire condition: 100 %, drive condition: 100 %, maximum load weight: 450 kg, Equipment: UVV, Work Platform Spider Lift Track Platform CAPRI 08-10 We offer you: Spider Lift Cabri 08-10 Brand new machine, year of manufacture 2025 Working height: 10 meters Platform height: 8 meters Machine dimensions: 262 x 139 x 240 cm Platform load capacity: 450 kg Pgjdpfx Agjpwb Huo Dek Outreach load capacity: 113 kg Platform size: 227 x 112 cm Platform extended: 317 x 112 cm Machine weight: 2,870 kg Integrated charger in the machine 48V/25A 2 drive motors installed, each 2x48V/4 kW Climbing ability: 25% Advantages of Cabri platforms: ECU & control unit from a reputable brand manufacturer installed Upgraded batteries installed Fully electric operation Emission-free operation Heavy-duty crawler undercarriage Non-marking tracks Robust design The machine’s weight is evenly distributed via the lightweight crawler tracks, which greatly reduces ground pressure. Therefore, it is particularly suited for indoor applications on sensitive floors with limited load capacity. Non-marking tracks leave no marks. All-terrain spider lift with up to 25% climbing ability Can overcome ground obstacles Suitable for work on uneven terrain Excellent traction enhances ground adhesion Highly maneuverable, even in confined spaces Low maintenance and service costs due to AC technology This advertisement does not constitute a binding offer and is for illustration purposes only. All details are provided to the best of our knowledge. Errors, typos, and prior sale excepted. You will receive an invoice with VAT shown. Shipping is possible at extra cost.

Condition: used, Year of construction: 2012, machine/vehicle number: RPM 1000 D, Used robots - polishing machines P 1000 D Type: P1000 Right-hand version Pjdpfoxludxjx Ag Degk Polishing discs Ø 1000 mm

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Podpeyhxl Rofx Ag Djgk Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Automatic edge banding machine for pre-glued edges Psdpfx Agswfw A Ho Dogk

Condition: used, machine/vehicle number: 580P090100, Wire feed unit for manual TIG welding TBi PenFeeder wire feed unit Wire feed speed Suitable wires Wire feed length Wire spool mount Dimensions Weight Podpfx Aex Ux Ezjg Dogk Power supply Control adjustable from 0.5–10 m/min 0.8–1.6 mm, all wire types TBi WirePen with 3 m length Mandrel diameter 50 mm for standard D300 wire spools and basket spool holders approx. 656 x 271 x 442 mm approx. 11 kg (without wire spool) 115~230 V AC, 50~60 Hz On/Off via TBi WirePen, selectable 2-stroke or 4-stroke operation Purpose The TBi PenFeeder helps make manual TIG welding more efficient and faster. The filler wire is available virtually endlessly at the touch of a button, eliminating welding pauses for repositioning or changing rods. Using filler material from a spool also saves costs. Even less experienced TIG welders can achieve good results quickly with this system.

Condition: good (used), Potentiometer, dual potentiometer, regulator, controller, level regulator, control Manufacturer: Elvo, Regulator Controller -Type: COF2AC -Voltage: 115-230 V 50-60 Hz Pjdsxyf Iwopfx Ag Dsgk -Number: 2x controllers available Price: per piece -Dimensions: 265/160/H90 mm -Weight: 1 kg/pc.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm. Pgsdpow Iwaiofx Ag Djk

Condition: ready for operation (used), functionality: fully functional, The TSI Turroques Serge Industrie embosser offers a reliable solution for the continuous shaping of semi-firm food products. It is designed for workshops seeking a stable operating rate, consistent shaping, and controlled visual quality. Thanks to its robust food-grade stainless steel construction, it is ideally suited for environments that adhere to strict hygiene standards. Additionally, its mechanical architecture supports prolonged use, maintaining high productivity without performance loss over multiple cycles. The machine also ensures shape consistency, enhancing the final product’s appearance. This regularity simplifies subsequent cooking, packaging, or presentation processes, as each piece maintains a uniform size. Furthermore, reduced variation helps minimize material waste and weight discrepancies, positively impacting the overall profitability of the production line. As a result, the embosser optimizes process stability and directly contributes to production efficiency. Its design allows for straightforward integration into existing production lines, either upstream or downstream of other equipment such as fillers, conveyors, or packaging systems. This flexibility enables adaptation to different formats, textures, or recipes without major modifications. Easy access to cleaning areas reduces maintenance time and minimizes production downtime. Ultimately, the embosser quickly becomes a strategic asset for workshops aiming to improve process consistency while offering simple and intuitive daily operation. Technical specifications: Height: 1700 mm Width: 600 mm Length: 2340 mm Psdpfxexrtpao Ag Dsgk Year of manufacture: 2021 Cylinder diameter: 95 mm Registration: 235EM

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 30,410 h, machine/vehicle number: 304E1176, laser hours: 30,410 h, laser power: 2,000 W, High-end 2D laser cutting machine from Prima Industrie, model Zaphiro, manufactured in 2011, with a 4 kW laser power. Ideal for precision industrial work in carbon steel, stainless steel, and aluminum. Pgedpfx Agswhz Ifj Djk

Year of construction: 2003, operating hours: 6,215 h, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER Podpfx Aex Ruz Rjg Djgk X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 150 mm WORKING AREA: 3000 x 1500 mm SOURCE: CP 3500 ; 3500 W CONTROL UNIT: PRIMACH 20L NOTE: COMPLETELY OVERHAULED MACHINE IN 2018