Used Friocell Laboratory Incubator for sale (1,477)

Year of construction: 2009, condition: good (used), BINDER KB 720 Refrigerated Incubator This high-performance refrigerated incubator for controlled temperature management of microorganisms features a chamber size of 100 x 115 x 60 cm, providing a total usable volume of approximately 720 liters. Temperature range: 0° C - 100° C Njdeypamuepfx Akuslb Manufacturer: Binder Year of manufacture: 2009 Space requirement: 125 x 100 x 200 cm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total height: 1,000 mm, total width: 660 mm, total length: 1,250 mm, HERBST HRV S7 Laboratory Cream Processing Plant This machine is designed for mixing creams and pasty materials. Nedpjypak Hsfx Akujlb Mixing container approx. 7 litres capacity Stainless steel container with heatable double jacket Combination mixing tool integrated into the container lid Container vacuum-proof Ingegrated vacuum pump Manufacturer: Sonstige Year of construction: 2018 Floor Space: 100 x 66 x 125 cm

Condition: used, This listing is for a Thermo Scientific MaxQ 8000 Orbital shaker incubator The unit is in full working condition and is ready for immediate release. The Thermo Scientific MaxQ 8000 is an orbital shaker incubator — a piece of lab equipment that combines controlled shaking and temperature control in one unit. It’s designed for biological and biochemical workflows where maintaining both a constant temperature and agitation are important, such as: - Cell culture (bacteria, yeast, insect or mammalian cells) - Fermentation - Protein expression - Hybridization and DNA work - Solubility studies and other mixing tasks How It Works - Orbital shaking: The platform inside moves in a circular (orbital) motion to mix or agitate samples evenly. - Temperature control: It incubates samples at controlled temperatures — typically from above ambient up to ~60 °C, and in refrigerated models also below ambient — so you can grow cultures or perform temperature-sensitive reactions. - Stackability: Units can be stacked 2–3 high to multiply capacity without using more floor space. Key Features Nlodsylapnepfx Akuob - Temperature range: Ambient +10 °C to ~60 °C (or lower if refrigerated version) - Speed range: ~25–400 rpm for shaking with accurate control - HEPA-filtered chamber: Promotes clean air and reduces cross-contamination risk inside the incubator for better culture conditions. - Slide-out platform: Makes loading and adjusting flasks easy. - Microprocessor controls: Digital display and alarms for monitoring temperature, speed, and time. - Typical Applications - Growing microbial or cell cultures - Protein expression studies - Hybridization reactions - Solubility assays - General mixing where precise temperature control is needed alongside agitation.

Condition: used, machine/vehicle number: 2405, functionality: unexamined, input voltage: 200 V, input frequency: 50 Hz, rotational speed (max.): 14,000 rpm, Used Hettich Mikro 200R Centrifuge with cooling. Model: Mikro 200R Manufacturer: Hettich Zentrifugen Capacity: 24 tubes Max RPM: 14,000 Voltage: 200-240 V (50Hz) | 1.8A Nlsdpfxeynhwxo Akusb

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Nlsdpjynh E Aofx Akuob Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, comes with decontamination mode !!! Overall Dimensions - inches (mm): Model NU-5510/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - Minimum Temperature for 145 DEG Cycle 135°C Decontamination: 95 DEG Cycle 87°C - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. Nsdpfjxbdt Ijx Akuelb - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2023, condition: like new (used), Binder FP 400 Laboratory Oven Year of manufacture: 2023. Like new, unused. Nsdpfx Akoyt A Enjuslb 2-year warranty on spare parts Binder FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the entire chamber. This makes the device an ideal foundation for reproducible materials and stability testing, incubation, or developmental processes. Compared to similar test or climate chambers, it sets itself apart with high efficiency, energy savings, and user-friendly operation — greatly simplifying daily laboratory workflows. Technical features and advantages in everyday laboratory use: The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of operation. This material test oven allows precise control of temperature conditions across a wide range of testing and development processes—from microbiological cultivation and chemical reaction studies to stability testing of sensitive samples. Key technical specifications at a glance: - Temperature range: approx. 5 °C above ambient up to max. 300 °C - Internal volume: 400 liters; maximum total load capacity: 90 kg (up to 35 kg per shelf) - Temporal temperature deviation: ±0.3 K; spatial temperature variation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N ~, 3.4 kW, 50/60 Hz - Power consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made of high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low working noise - Environmentally friendly and energy saving due to low energy consumption and advanced insulation design - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Two inner glass doors allow quick visual inspection without affecting temperature levels - Optimized air flow ensures optimal temperature uniformity - Easy to transport and install thanks to its compact design and ergonomic handle The steam chamber has a large capacity of 498 liters, and the advanced air exchange system (16–18 exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to set parameters after a brief door opening remains minimal, even at high temperatures—crucial for frequent routine operations. Compliance with globally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation for daily use. This device is thus perfectly suited for quality control laboratories, industrial test applications, and academic research projects where the highest precision is required.

Condition: used, This listing is for the Labcold RLPR0517 150L Under-counter laboratory refrigerator The unit is in full working condition and is ready for immediate use The Labcold RLPR0517 is a 150 litre under-counter laboratory refrigerator with a spark-free interior, meaning all potential ignition sources (like internal electrical components) are placed outside the storage chamber. This makes it significantly safer for storing substances that might give off flammable vapours (with appropriate risk assessment). Capacity: ~150 litres suitable for reagents, samples or general laboratory use. Style & Size: Undercounter design with external dimensions approx. 835 mm (H) × 600 mm (W) × 600 mm (D). Temperature Range: Maintains between 0 °C and +10 °C; factory set point usually around 5 °C. Nljdpfx Akoyi Tmnsujb Interior: Powder-coated steel to ensure durability, ease of cleaning and safety. Shelving: Includes 3 adjustable shelves to organise contents. Defrost: Off-cycle automatic defrost helps maintain performance and reduces frost build-up.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Nlsdpfx Akeymbzueuob Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Nsdowurq Repfx Akuelb ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, Nlsdpfswurqkjx Akueb and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Special Opportunity! We are offering top-maintained CO2 incubators from the world-renowned brand "Heraeus" or "Thermo Electron" model HERAcell 150i, copper version, sourced from the medical academy inventory of the German Armed Forces (Bundeswehr). The HERAcell 150i is one of the most widely used and reliable devices in its class, and is considered essential in laboratories worldwide. Features include a chamber made entirely of copper with a water reservoir integrated directly into the working space for added convenience, along with three copper shelves. The devices were procured by the Bundeswehr in 2014 but saw very little use, primarily being powered on occasionally for testing purposes only. All components, including the shelves, present in excellent technical and visual condition—please see images. There are no damages or malfunctions; the unit is immediately ready for operation. However, we would like to point out for proper order that, prior to commercial use, all regular safety inspections as per STK / MTK requirements must be renewed! The greenish discolorations shown in the photos are a result of water interacting with copper during functional testing and do not impact usability in any way. Nljdpfx Aevph Enjkujb Included in the scope of delivery: the incubator itself and three copper shelves. The price is per device as described and includes accessories. Technical Data: - Capacity (Imperial): 5.3 cu. ft. - Data output: RS232 - Capacity (Metric): 150 L - Chamber material: Copper - CO2 concentration range: 0 to 20% - CO2 sensor technology: TC sensor - Illumination: LED - Material: Copper - O2 concentration range: Optional 1 to 21% or 5 to 90% - Oxygen control: Optional 1 to 21% or 5 to 90% - Relative humidity: < 90% at 37°C - Type: CO2 Incubator - Application: multipurpose - Humidification source: integrated water reservoir - Interior dimensions (L x W x H): 20.9 x 18.5 x 23.9 in (53 x 47 x 60.7 cm) - Exterior dimensions (L x W x H): 30.8 x 25.1 x 34.1 in (78.2 x 63.7 x 86.7 cm) - Weight: 70 kg Ex-works pricing. Collection is possible during our regular business hours with a prior appointment. Insured freight shipping by a forwarding company is available within three working days of receipt of payment for an additional fee. Total system weight, including accessories and pallet, is approx. 100 kg. Sale is exclusively to commercial clients. You will receive a VAT invoice. Private individuals may purchase the equipment “on behalf of a customer;” direct commercial sales to private buyers are expressly excluded! Sold as-is, with warranty and liability for material defects excluded. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duties by the seller, or for injury to life, body, or health. For questions about pricing or technical details, please do not hesitate to contact us at the address provided.

Condition: excellent (used), Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional ultra-low temperature freezer from the Lab-Care series by the Spanish manufacturer Infrico. It is specifically designed for use in laboratories and medical facilities to safely store samples at extremely low temperatures. Technical Features The LTF 90S is characterized by high temperature stability and precise control. According to Infrico Medcare, the LTF series offers the following standard specifications: Control: Equipped with a digital controller and an intuitive touchscreen Precision: Temperature stability is approximately ±1°C, with a uniformity of less than ±2°C Alarm System: Features visual and audible alarms for temperature deviations, sensor malfunctions, and open doors Refrigeration: Uses natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmental friendliness Hygiene: The interior is often made of stainless steel AISI 304 stainless steel with rounded corners for easy cleaning The Infrico Medcare LTF 90S has a nominal capacity of 900 liters. Nledpfxeyk E D Uj Akuob Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Erlab Captair Filtair 936 Fume Hood Erlab's exhaustless, filtering chemical fume hoods offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless advantages, providing seamless protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical fume hood performance criteria and ensures your safety at all times. Advantages Complete user protection Filtration safety: All captair filtair fume hood models comply with AFNOR NFX 15-21 1 Class II. High retention capacity for chemical vapors in the work area, guaranteed by controlled air velocity at the front and compliance with pollutant retention standards (XPX 15203, BS 7258, DIN 12927). A sampling valve for the exhaust air allows the user to check filter saturation at any time using colorimetric test tubes (not included). The acrylic front and door protect against potential chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Angled front panel provides better visibility of the work area. Thoughtfully designed hand openings give the user ample freedom of movement within the work area. Cable glands for routing electrical or power cables into the work area. Optimized working position. Very low noise level (49 dBA). Transparent walls for a clear view of work processes within the work area. Easy installation / Energy savings. No exhaust duct required; a standard electrical outlet is sufficient. Direct installation in your laboratory or on an optional mobicap rolling table. Energy savings through the recycling of purified air from the unit without the consumption of heated or cooled air. Erlab/Captair fume hood Filtair 936 Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate: 200 m³/h Front air inlet velocity: 0.51 m/s Filter type: S Filter 960-961 Safety class 3 Nedpfx Asyk Dq Hskuslb Pollutant retention class: B 2 fans Analog flow meter Noise level: approx. 51 dB(A) External dimensions: 110 x 84 x 74 cm Internal dimensions: 87 x 82 x 73 cm Working chamber volume: 0.432 m³ Two access openings in the front panel Available Filters: MF and VF CE marked. Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Nljdpfju D E A Dsx Akuob Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Nedpedz Sraofx Akujlb Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Nlodpfx Aodz Srbjkueb Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace Nledpfx Aksxurpweueb 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Njdpeuzhqrofx Akujlb Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), mytron 160 K CO2 Double Incubator The 160/160 K CO2 Incubator ensures environmental conditions for cell and tissue cultures growing in vitro that closely approximate the organism's physiological values. Interior volume: approx. 160 l Weight: 70 kg Air circulation: by fan Cooling: cooling unit Temperature display: setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15 °C to 70 °C at 23 °C ambient temperature Temperature stability: +/- 0.2 K over time Humidity display: setpoint and actual value display Humidity range: >/=95% Nlsdpfx Akjqazr Sousb Humidity stability: +/- 2.5% CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 stability: +/- 0.2% CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT W x H x D = 130x85x70 cm Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. Nodsu D Ariepfx Akujlb If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), functionality: fully functional, Brabender Single Screw Extruder 30 mm – 30 L/D – with K-Tron Twin Screw Feeder – Strand Die Nlodoyi Am Rspfx Akusb For sale is a fully functional Brabender single screw extruder in a compact design, ideal for laboratory, development, or small-scale production applications. Technical Data: • Manufacturer: Brabender • Screw diameter: 30 mm • Process length: 25 L/D • Drive: 5.5 kW • Multi-zone heating system (5 zones) • Compact control cabinet with digital temperature control • Strand die adapted Features: • K-Tron twin screw feeder • Compact, clearly arranged control unit • Multiple heating zones with individual control • Melt temperature & melt pressure monitoring Condition: • Fully functional • Well-maintained overall condition • Ready for immediate use A trial run with customer material is available upon prior arrangement.

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Nedpfx Akoiuzkmeuslb Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Nodpfeiuzlvox Akuolb Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells Nsdjxaungopfx Akuelb • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures