Used G. Rabolini Srl. Imperia for sale (38,509)

Year of construction: 2020, condition: ready for operation (used), Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible. Lrjdsxcx Amjpfx Akyjk

Year of construction: 2018, condition: excellent (used), functionality: fully functional, Good day, We are pleased to offer you, without obligation, a used, self-propelled stretch/wrapping robot (pallet wrapper), manufacturer PKG, model Motion. Lrsdpfx Aksyg Nyxjyek Manufacturer: PKG SRL Model: Motion Year of manufacture: 2018 Maximum rotation speed: 93 m/min. Battery specification: Standard AGM/gel batteries 12V – 110Ah; both batteries were replaced at the end of last year. Charging cycle: 8-10 hours Pallet dimensions: minimum 500 x 500 mm, maximum unlimited Maximum wrapping height: 2,200 mm Minimum wrapping height: 500 mm Turning circle radius: 1,100 mm Electrical connection for battery charger: 230V, 50Hz Charger: High-frequency charger integrated in the machine Machine weight: approx. 400 kg Film: Type: Machine stretch film Roll diameter: max. 250 mm Roll height: 500 mm Roll weight: approx. 20 kg Note: The above technical data were taken from the operating manual, manufacturer brochures, or other sources. We cannot guarantee the accuracy or completeness of this information. Scope of delivery: 1 used stretch/wrapping robot (pallet wrapper), type Motion by PKG SRL, without film rolls. Application area and condition: The machine was used in a picking and shipping department for stretch-wrapping palletized goods. The unit is fully operational, in good condition, and can be inspected and tested under power. Both batteries were replaced at the end of last year. Remark: The machine will be available for collection from March 2026. Until then, the robot will remain in use. We would be delighted if this machine is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: reconditioned (used), Year of construction: 2006, BACCIOTTINI Group Pit Stop AF Speed, year 2006: automatic creasing and perforating machine in excellent condition. The machine will be overhauled at Bacciottini Group srl's facilities. Robust construction and reliable performance. The machine is equipped with a NEW standard V-Shape creasing kit and a 100 cm extension. Ljdpfx Aeyk Utxjkysrk All other optional tools currently available can be added: digital creasing kit, standard perforating kit (2/1, 3/1, 4/1), or micro-perforation kit. Technical specifications: - Maximum format: 50 x 70 cm (50 x 100 cm with extension) - Minimum format: 8 x 15 cm - Paper weight: from 80 to 600 gsm - Minimum creasing distance: 0.1 mm - Programming: 200 programs with 100 creases per program - Power supply: 400 Volt three-phase 50 Hz - Power requirement: 3.5 kW This has been our best-selling model for years and continues to be appreciated worldwide for its quality and reliability. The attached photos are from our catalogue and do not specifically refer to the machine being offered.

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Lredpfx Aksvxz Axsysk Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment.

Condition: good (used), G Webb Automation MiniFill screw feed doser feeding onto weigh platform. Perfect for packing powders, granules, coffee etc into bags. Lsdpfx Akjm Sg Hcjyork

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. Lredoydn Shepfx Akyjk If you have any questions or need more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2006, Overview  This Capsuling Machine was manufactured in 2006 by the Italian company NORTAN SRL. This machine was used to apply aluminum cones on 75cl glass cider bottles and includes a cone distributor, cone oven, and cone spinner. It is immediately available, as the production in the facility was stopped in 2022. Technical data  Capacity: 9,000 – 12,000 bottles per hour Formats: 75cl glass bottles (cider, champagne type) Dimensions: L 200 cm × W 150 cm × H 250 cm Application: Cone application (distributor, oven, spinner) Scope of Delivery  Cone distributor Cone oven Cone spinner Operator platforms Lrodpfx Aewhkywokyok

Year of construction: 2004, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 40EV.118, Twin-screw extruder model EBC 40HT/37D Screw diameter: 42mm Main motor power: 51kW L/D: 37 Center distance: 35mm The extruder consists of a machine base, reduction gearbox, and a distribution gearbox equipped with special bearings capable of ensuring perfect operation with a backpressure of up to 150 bar. The barrel is a modular cylindrical type, with a length equivalent to 37 screw diameters, divided into eight sections. Temperature regulation of each barrel module is achieved by forced circulation of demineralized water through a series of horizontally drilled holes in each module. Heating is provided by cartridge heaters. The screws are made up of interchangeable segments and are mounted on splined shafts, allowing for the configuration best suited to the required processing. Barrels and screws are manufactured from highly wear-resistant steel. The degassing system consists of a 1.5kW liquid ring vacuum pump connected to the dedicated module by easy-to-clean piping; extracted gases are condensed in a special container for easy cleaning. Lrjdpfx Akjyg Eghoyjk The drive system features a (Siemens) 51kW AC motor with an inverter, enclosed in an electrical cabinet equipped with appropriate safety features and control signals. The control panel (integrated into the extruder) is divided into two sections: power, and temperature control. The cabinet is equipped with an air-conditioning unit. The extruder comes with a closed-loop water/water temperature control unit (1.1kW pump). Chiller not included.

Condition: good (used), Technical data for the wide span shelf truss: Shelving system: Jung Heinrich Type: G Included in delivery are: 01x wide span shelf truss, used Material color: RAL 1007 yellow Z-profile: 50 x 30 mm agraffe: 3 HK (hooks) Lsdpfx Aogqu H Nekyork clear width: 2.145 mm 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Year of construction: 2022, condition: like new (used), Machine for printing QR codes and applying hologram patches, customization of labels or roll-fed paper support. Performs hot stamping of customized hologram or transparent foil onto the QR code, enabling immediate verification via reader device with IOS or Android software. Lsdpfxsygku Rs Akyork

Condition: good (used), G&N Kugelmüller MPS 1 Cup Grinding Machine from University - Spindle speed 3150 rpm Lrjdpfoyc Hmnox Akyek - Grinding height above magnet approx. 130 mm - Magnetic chuck 200x100 mm - Side-mounted wheel dresser - Fine adjustment - Drive motor 0.6 kW - Machine enclosure - Documentation Dimensions: LxWxH 0.8x0.7x1.6 meters / Weight 150 kg Subject to errors and input mistakes.

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Lrodpfx Akjk Eakvjyek Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: good (used), 750 litre vacuum cutter direct from Bankrupt meat-free factory. The machine was rebuilt and only used for a short time before the company went Bankrupt. Lsdpfex N Nlzsx Akyjrk

Condition: used, Year of construction: 1998, Manufacturer : Axomatic srl Model: Optima 900 Matic Year : 1998 Type : Plastic tube filler Lsdpfx Akox R Arkeyork Max capacity : 70 units / min Dosing range : 2 ml - 300 ml Max tube length : 280 mm with cap Tube diameter: 10 mm - 60 mm Power : 7 KW Current: 18 A

Condition: used, Year of construction: 1995, Manufacturer: Ozaf srl Model: E 10 Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Equipment: vibration system Ledpjx R Ap Aefx Akyerk Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, REF: MM5771 1 x Canellitech Srl automatic inline monoblock filling and crown capping machine for 5L bottles supplied with infeed and outfeed conveyors. Was used for filling 5L bottles and applying push-on caps. Model - 8-1 (8 x filling heads). Serial number - 013368. Lredpfxeulpu Ss Akyek Date of manufacture - 2019. Speed - up to 500 bottles per hour. Has been used very lightly between 2019 and 2023 (2 x days per month). Overall dimensions - 2.7m L x 1.1m W x 2.45m H.

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Lsdpfxsiidr Re Akyerk -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit Lodpeiidrxjfx Akyork -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Lrsdpfoiidr Hsx Akysk -Circuit board: LEA SRL. Type LEA 1020 -Dimensions: 380/300/H130 mm -Weight: 4.3 kg

Year of construction: 1994, condition: good (used), Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element Ledpfx Akoiidrbeyork -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Lodpfxeiidrqo Akyerk -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 360/130/H60 mm Lredpfxeiidrue Akyok -Weight: 1,3 kg

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 Lrodpfx Aeiidr Ajkysk -Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02 -Dimensions: 360/130/H60 mm -Weight: 0.4 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1020 Lodpfsiidrmsx Akyork -Dimensions: 300/280/H80 mm -Weight: 3 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 -Dimensions: 265/125/H100 mm Lodeiidr Uopfx Akyork -Weight: 2.0 kg