Used Glogar Ultra 1300 for sale (2,894)

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg Iodpowt Suajfx Abbetf

Condition: good (used), Type RHP 430 A CN Reference C2184 Maximum cutting capacity: 430 mm Maximum flat cutting capacity: 430 x 430 mm One-time feed length: 600 mm Feed table Chip conveyor Isdpfx Abjwlh Dzjbotf Minimum cutting capacity: Ø: 10 mm Minimum flat cutting capacity (W x H): 10 x 8 mm 20-combination programmer.

Condition: good (used), Year of construction: 1990, Cutting capacity at 90°: 220 mm (round and square) Itodpewlni Rjfx Abbef Motor power: 3 kW Total power: 5 kW Band speed: 20 to 140 rpm Dimensions: 2350 x 2050 x 1500 mm Band dimensions: 3.720 x 32 x 1.1 mm Vice opening: 230 mm Jaw height: 120 mm Table height: 700 mm Net weight: 1500 kg Feed length: 600 mm

Condition: like new (used), Year of construction: 2015, nominal power: 1,300 kW (1,767.51 HP), rotational speed (min.): 1,493 rpm, rotational speed (max.): 1,493 rpm, input voltage: 6,000 V, input frequency: 50 Hz, overall weight: 6,100 kg, 1 asynchronous electric motor Manufacturer: Reform Elektromotorenbau GmbH Type: Y2-500-4 Power: 1300 kW Speed: 1493 rpm Voltage: 6000 volts Current: 151.4 A cos Φ: 0.86 Insulation class: F Iedev I Alyepfx Abbetf Frequency: 50 Hz Protection class: IP55 Design: Foot (B3) Operating mode: S1 continuous operation Weight: 6100 kg Year of manufacture: 12/2015 Bearings: NU228C3 / 6030C3 and NU228C3 Cooling: Air Shaft height: 500 mm

Year of construction: 2025, operating hours: 10 h, condition: as good as new (ex-display),

Year of construction: 2025, condition: new, Spray cleaning plant - parts washing plant - NEW SYSTEM / pilot plant Basket useful dimensions: LxW 1.100 x 1.100 mm net height: 800 mm max. loading weight: 700 kg tank volume: 320 liters, spraying pressure: 4,3 bar, heatable up to 90°C plant completely made of stainless steel 1.4301 (AISI 304) plant incl. loading trolley in front of the plant included special equipment: - steam vapor extraction incl. condensate recirculation - autom. water refilling and level control - filter unit (coarse filter) in the return to the washing tank - preparation for retrofitting of an oil separator - weekly timer - E-spray tube for optimized component cleaning - Inspection hatch in the tank area - Siemens Logo control with colored touch panel (4,3") On request, commissioning can be carried out by qualified personnel. Isdjhl Icqopfx Abbstf

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl.1 piece stainless steel basket - floor ultrasound, frequency: 38 kHz, power (eff./peak): 1.600/3.200 Watt - Heating adjustable up to 80°C; power: 6,000 watts - Basket dimensions: LxWxH 920 x 380 x 350h mm - Basin dimensions: LxWxH 1,000 x 450 x 450h mm - Outer dimensions: LxWxH 1.210 x 690 x 900h mm - max. loading weight of the basket: 50 kg - total weight of the unit: 160 kg Iedpekuy D Hefx Abbstf - unit is mobile

Condition: good (used), Year of construction: 2015, FOR SALE: 4-Axis Palletized Horizontal Machining Center – MCM TANK 1300 MP4 Description: Offering a CNC horizontal machining center from the Italian manufacturer MCM S.p.A., model TANK 1300. This is a high-performance, extremely rigid, and precise machine designed for intensive machining of complex components, ideally suited for the aerospace, energy, and general engineering sectors. Technical Specifications (Manufacturer Source): Brand: MCM S.p.A. (Vigolzone, Italy) Model: TANK 1300 (Type MP4) Year of Manufacture: 2015 Axes: 4 axes (X, Y, Z + continuous rotary B-axis on table) Compliance: CE marked Working Capacities: Travel (X / Y / Z): 1,300 mm x 1,300 mm x 1,300 mm (Generous machining envelope) Pallet Dimensions: 800 x 800 mm or 1,000 x 1,000 mm Pallet System: MP4 configuration (4-position multi-pallet) for increased production autonomy Spindle Speed: Up to 10,000 rpm (depending on motorization, with high-speed options available) Spindle Taper: HSK-A100 or ISO 50 (high rigidity) Tool Magazine: Large capacity (standard 80 to 199 tools, expandable) Key Features: "T"-Shape Design: Ensures constant thermal and geometric stability for micron-level accuracy Productivity: Pallet system allows for loading/unloading parts in masked time, ensuring maximum machine utilization Condition: 2015 machine, maintained in a modern industrial environment. Ijdpfxeyr Hdfe Abbotf

Condition: excellent (used), machine/vehicle number: YB4A010138L037286, first registration: 11/2008, loading space length: 13,340 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, color: white, Year of construction: 2008, = Additional options and accessories = - Rear doors = Remarks = YB4A010138L037286 Cool unit brand: Carrier = More information = Make of bodywork: CARIER MAXIMA 1300 Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Itjdpsymq Evofx Abbsf

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Itsdpfx Abey Drbnobof Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2026, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: You will receive a 24-month warranty with this machine. On request, we can also offer you a suitable loading ramp, a photoelectric cell for black detection, or the appropriate machine stretch film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results with up to 32 storable programs, thereby fully eliminating the “human factor.” As space-saving as a pallet wrapper with a horseshoe turntable and as robust as a closed system – these are the advantages of this machine, put in a nutshell! The electromagnetic brake allows you to precisely store the film tension for each program step (foot wrapping, upwards wrapping, head wrapping, downwards wrapping). Ijdpfx Aboy Drbhjbstf Within the parameters of each program, you can also adjust the speed of the film carriage and turntable. Head wraps, foot wraps, and film overlap at the pallet end can each be programmed individually. This way, you can store customized programs for every packing scheme to achieve optimal wrapping results. Programs can be password-protected so that operators can only select from pre-set programs. Weighing 500 kg, this model is designed for loads up to 1200 kg. Our Profiline LP comes with a 1650 mm turntable as standard and can wrap pallets up to 2500 mm in height. Automatic pallet detection (via photoelectric cell) is standard, as are adjustable top and bottom wraps. This model is our recommendation if you have limited space but require a professional and robust pallet wrapper that can be optimally adapted to your needs. Would you like a higher mast, film pre-stretch, or an automatic film cut-off? Almost anything is possible with this machine! We are happy to configure this machine as a new unit with options perfectly matched to your requirements. About us: We believe that business is made between people! A supplier delivers the goods you order – a partner does more: they help you find the best products, support you in achieving your goals, and stand by you in case of problems and challenges! That is our conviction. For over 40 years and through four generations, we have been the partner of mid-sized companies for all matters concerning 'stretching and sealing.' Upon request, we are happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, functionality: fully functional, mileage: 500 km, power: 176.52 kW (240.00 HP), fuel type: diesel, overall weight: 11,990 kg, tire condition: 100 %, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 6, loading space length: 6,300 mm, Year of construction: 2026, Equipment: AdBlue, Bluetooth, USB port, air conditioning, blind spot assist, cable winch, central locking, cruise control, differential lock, electric window regulation, fog lights, full service history, lane keeping assist, non-smoking vehicle, power assisted steering, power mirror, tire pressure monitoring, SCHUIFPLATEAU CP12 MET HYDRAULISCHE RAMPEN VLOER TRANENPLAAT - 6494x2360 - UNIFORM VERDEELDE CAPACITEIT 5t 2 DUBBELWERKENDE KANTELCILINDERS MET KLEPPEN 1 DUBBELWERKENDE SCHUIFCILINDER MET KLEP SCHUIVEN OP TEFLON PAD VOORBEREIDING VOOR MOTOSTEUN 2 WIELBLOKKEN VERSCHUIFBARE HYDRAULISCHE LIER CA12-16/65 CA12 STANDAARD CABINEBESCHERMER met 2 LED WERKLAMPEN, MET ALU BESCHERMING BUMPER CA7.5 - CA12 - CA16 MET BUFFERS EN BOLKOPPELING NOVAWINCH 4.5T LIER MET KABELGELEIDING EN KABELKLEM KABEL 25m Ø11 RADIOBEDIENING LIER en VERSCH en PLATFORM en WERKLAMPEN RANDBESCHERMING CA12-CA16 ONAFHANKELIJKE HYDRAULISCHE RAMPEN WIELEN ONDER ACHTERSTEUNEN COMBINATIE 3T LEPEL / 3DE PUNT MET SLEEPKOPPELING, SPANRIEMEN, KABELWIEL DERDE PUNT WINCH OP LEPEL OPBERGING VOOR ACCESSOIRES LEPEL HOMOLOGATIE FASE 2 BELGIË INCLUSIEF COULISSANT CP12 AVEC RAMPES HYDRAULIQUES PLANCHER LARMEE - 6494x2360 - CAPACITE UNIFORMEMENT REPARTIE 5t 2 VERINS DE BASCULEMENT DOUBLE EFFET AVEC CLAPETS 1 VERIN DE COULISSEMENT DOUBLE EFFET AVEC CLAPET COULISSEMENT SUR PATINS EN TEFLON PRE-DISPOSITION POUR PORTE MOTO 2 CALES DE BLOCAGE RAPIDE TRANSLATION HYD TREUIL CA12-16/65 ARCEAU STANDARD CA12 avec 2 PHARES TRAVAIL LED, AVEC PROTECTION ALU BUTOIR CA7.5 - CA12 - CA16 AVEC TAMPONS ET ROTULE COUDEE TREUIL NOVAWINCH 4.5T AVEC GUIDE CABLE ET PRESSE CABLE CABLE 25m Ø11 CDE TREUIL et TRANSLATION et PLATEAU RADIO et PHARES DE TRAVAIL PROTECTIONS DE RAMBARDE CA12-CA16 RAMPES HYDRAULIQUES INDEPENDANTES ROUES SOUS BEQUILLES AR COMBINE PANIER POTENCE 3T AVEC BOULE DE REMORQUAGE, SANGLES DE PANIER, TÊTE DE POTENCE TREUIL SUR PANIER SUPPORT POUR RANGEMENT ACCESSOIRES PANIER Iedpfx Ajy An Hqebbjtf HOMOLOGATION PHASE 2 BELGIQUE INCLUS

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Itsdoy Ardyjpfx Abbef

Condition: used, Year of construction: 2001, functionality: fully functional, operating hours: 80,188 h, power: 3,200 kW (4,350.78 HP), pressing force: 22 t, Equipment: safety light barrier, Description X working area max.: 2585 mm Y working area max.: 1280 mm Control unit: Siemens Sinumerik 840 D Laser power: 2700 watts Operating hours: Laser beam on: 13,817 hrs Laser on: 71,637 hrs Operating hours: 80,188 hrs Standard equipment: - Rigid C-frame - Coordinate guide with integrated linear magazine - Drives: Maintenance-free three-phase servo motors - Programmable hold-down device for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser stations, ejector cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 3200W, vibration-isolated, integrated into machine frame, incl. cooling unit and laser control system - Programmable cutting gas pressure adjustment - Laser cutting head: 5'' lens, quick-change system, distance control Safety: Multi-beam light barriers, fast-acting hydraulic shutoff, extraction system and compact dust extractor, protective device against stray radiation at the cutting head Ijdjy Dpnfjpfx Abbetf + Laser TLF 3200 + Brush table + Marking / fast ribbing function + Softpunch + Blowing device for small parts + Repositioning cylinder + Bulge detection + Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, Brand: Burkle Model: SLC Machine no: 10362-02 Year of manufacture: 2003 Technical data of the machine (BURKLE SLC) General data - Type: SLC - Working width: 1300 mm - Working height: 900 ± 20 mm Workpieces - Workpiece characteristics: Flat, self-rigid - Workpiece width (max): Working width - Workpiece width (min): 350 mm - Workpiece length: 3 - 100 mm - Tolerance of the workpiece height over the entire working width: - Single track operation: ± 0.5 mm - Multi-track operation: ± 0.2 mm - Workpiece weight (max): 250 kg Piling material - Inspection material/cleaning agent with a self-ignition temperature: ≥ 200 °C Transport unit - Back pressure roller: See order confirmation - Rubber ring: See order confirmation - Diameter: 186 mm - Feed speed: 8 - 25 m/min Material circulation - Material pump feed capacity (double stroke): 575 cm³ Piling unit Piling roller - Rubber ring: See order confirmation - Diameter: 238 mm - Temperature (in case of optional heating/cooling application roller): Max 60 °C - Peripheral speed: Approx. 8 - 25 m/min Itsdpfxsv Hw Hcj Abbsf Dosing roller - Diameter: 174 mm - Temperature (with optional heated/cooled dosing roller): Max 60 °C - Peripheral speed: Approx. 3 - 9 m/min Accuracy of application over the entire working width at: - Application rate > 10 g/m²: ± 5 %. - Application rate < 10 g/m²: ± 10 % Adjustment of the feed-through height - Feed-through height (max): 120 - 5 mm - Accuracy of setting: ± 0.1 mm Compressed air connection - Required air pressure: 6 bar - Compressed air consumption: Approx. 50 NI/min Dimensions / weights - Dimensions: See installation drawing - Weight at working width 700 / 1300 / 1600 mm: 1250 / 1450 / 1600 kg Electricity - Connection values, voltages: See data sheet for electricity Other information - Noise level: < 70 ± 4 dB (A) Table 1-4: Technical data for standard sizes of the machine (continued) Note: The speed is limited to a maximum of 20 m/min when the dosing roller and height setting are set to a safety distance exceeding 120 mm (cleaning coupling). Stock no: 2002442BXM

Condition: ready for operation (used), Year of construction: 2019, Laminating press manufactured in 1998. This Bürkle EKMH 1300 features a working width of 1300 mm and is equipped with a new Siemens Simatik KMG Touch control system. It includes a Bürkle GLK calender, film holder, saw for trimming excess material, and two GWK temperature control units. If you are looking to get high-quality laminating capabilities, consider the Bürkle EKMH 1300 laminating press we have for sale. Contact us for further details regarding this machine. • Condition: Used line(s), not rebuilt, without warranty • Costa wide-belt sanding machines, type KK7 CT CT 1350 (2018) • From-below sander: contact roller, electronic shoe sanding unit, cleaning brush, intermediate conveyor belt approx. 3000 mm • From-above sander: identical equipment • IMA double-end profiler, type FBA/II/740/A (2018) • Scoring saw (bottom), splitter, flazer, prism cutter, joining cutter, cross-edge milling unit, 3 profiling milling units, brushes • Bürkle glue applicator, type DAK1300 (1992) • Bürkle laminating machine, type EKMH 1300 (1998) • New Siemens Simatik KMG Touch control system, Bürkle GLK calender • Film holder and trimming saw • Working width 1300 mm • Homag postforming machine • 2 saw units (horizontal and vertical) • 2 identically configured processing sides with gluing • Pressure zone with turret magazine for various profiles • Various milling units and buffing brushes • IMA panel processing and edge-banding line, type Combima 17/52/R75/3580:950 (2018) • Equipped with 50 processing units • Workpiece cleaning at the end • Kraft machining center • Kraft automatic hardware insertion machine for doors, type CTF91 (2006) • Automatic drilling machine for door hinges with milling units for lock cases and door handles • Untha shredder, type RS30 (2021) • Power 22 kW, operating hours 155 h Additional equipment Itedjy Dr Hqspfx Abbsf • Handling, feeding, transport, buffers • Kraft gantry feeder (2019): vacuum lift, 2 feed roller conveyors, 1 transport roller conveyor • Kraft roller conveyor system (2019): 3 individual elements, centering station • Feed conveyor and alignment station for the IMA double-end profiler • Kraft feed conveyor belt for laminating system (2019) • Kraft infeed table for laminating machine (2019) • Unloading conveyor belt (laminating section) • Conveyor and buffer system (Kraft, 2018): approx. 43 m powered roller conveyor, roller width approx. 1000 mm, 3 automatic cross-feed carriages • Gantry feeding with rotating vacuum gantry (for IMA Combima line) • Gantry system for destacking onto 3 different roller conveyors (for IMA Combima line) • Kraft portal destacking: vacuum portal with 3 destacking stations • Kraft automatic cross-transport cart (2018): roll width approx. 1400 mm, roll length approx. 2800 mm • Conveyor belt with inspection system: swivel arm with vacuum suction cup; visual inspection station • Intermediate buffer with 4 levels and infeed to the postforming machine • Infeed table to the postforming machine • Gantry loading with vacuum loader (for the machining center) • Process auxiliaries • Glue melting unit GWK Eco 03A • PU pre-melting units Nordson / VersaBlue (built 2020 and 2004) • 2 GWK temperature control units • 2 cooling units BEKO Bekoblizz LC (built 2020) • Steel platform with stairs and various pumps (for glue applicator) • Extraction, cleaning, shop equipment • Schuko mobile extraction unit, type ObiS3 (2015), 2.2 kW • Nilfisk Attix industrial vacuum cleaner • FORMAT workshop cart: 6 drawers, 1 hinged door, vise

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR210 R3100 ultra with 4.5 m linear axis Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka Control System KRC4 Year of manufacture: 2014 Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connecting cables Iedpfsxuwlwsx Abbjtf Kuka linear axis Type: KL1500-3 T Year of manufacture: 2013 Length approx. 4.5 m Travel stroke approx. 3.5 m KRC4 cable drag chain Weight: 2,200 kg ä17426

Condition: used, Year of construction: 2014, Industrial robot Manufacturer: Kuka Model: KR210 R3100 ultra Year of manufacture: 2014 Reach: 3,196 mm Weight: 1,154 kg Payload: 210 kg Kuka Control Unit KRC4 Year of manufacture: 2014 Iedpsxp Nuyefx Abbstf Weight: 163 kg Software: KSS 8.5.4 Kuka TouchPad KCP4 Kuka connection cables

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GRECON Ultra automatic finger jointing line Year of manufacture: 2003 Technical condition: very good, machine regularly serviced Technical data: • input workpiece length: 150–1000 mm • timber width: 40–205 mm • timber thickness: 20–80 mm • output / pressing length: 6100 mm • pressing force: 120 kN / 12 t • max. cross-section for 10/11 mm finger joints in softwood: 100 cm² • max. cross-section for 10/11 mm finger joints in hardwood: 80 cm² Performance: • vertical finger-jointing: • Ultra: 15.2 m/min Equipment / design: • 600 mm wide package milling unit • manual turning table • automatic turning of material and transfer to the press Itsdpfxoy Amk Ue Abbsf • the machine operates in a fully automatic cycle • 1 operator required Possibility of professional dismantling, assembly, commissioning, and operator training for the machine.

Condition: good (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10021711, overall weight: 1,400 kg, load capacity: 210 kg, controller manufacturer: KUKA, controller model: KRC 4, 1. Robot Arm • Manufacturer: KUKA Deutschland GmbH • Type: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Item number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Weight: 1154 kg • Payload: 210 kg • Reach: 3096 mm • Country of origin: Germany 2. Robot Controller • Type: VKR C4 • Item number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400V • Mains frequency: 50/60 Hz • Full load current: 22 A • Mains fuse: 25 A • Country of origin: Hungary 3. Extraction system • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Type: Small Dust Collector OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Consumption: 1.4 A • Noise Level: 10A [dBA] • Volume Flow (Max.): 600 m³/h • Weight: 60 kg • Protection Class: IP44 • Max. Negative Pressure: 1600 Pa • Country of Origin: Germany 4. Equipment & Special Features Itjdpfov Tyw Djx Abbef • Teach panel with connection cable (visible in the control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) • Additional attachment mounted on the robot flange, for special applications (e.g. B. Grinding or deburring applications) • Base for stationary floor mounting • Control and power cables pre-assembled and integrated • System is stored on pallets and ready for transport

Condition: new, CATALOG NUMBER RE036 2 axes – electric control for main saw blade lift and tilt with electronic display for height and angle, control panel integrated into the machine body – Brand new, ex-demo machine – DTR + CE documentation included – Cutting width at fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilting: 0-46° - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300-400 mm - Max scoring saw diameter: 125 mm - Scoring motor power: 0.75 kW - Scoring saw speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at fence (standard 1050 mm): 1300 mm - Sawing width using end stops on auxiliary table: 215-3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 5-115/3.5-80 mm - Cutting height for 400 mm blade 90°/45°: 25-140/15.5-95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm Itodsyz N T Ajpfx Abbef - Weight: 750 kg Optional equipment: – Angle fence – with aluminum bar Net price: 47,000 PLN Net price: 11,300 EUR (based on exchange rate of 4.15 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2001, operating hours: 56,380 h, machine/vehicle number: 184172, Used injection molding machine The machine has a complete history with all important repair work and components replacement hoses etc. Manufacturer: Arburg Type: 420C 1300-350 Year of construction: 2001 Machine no. 184172 Control system: Selogica Operating hours: 56380 h constant maintenance by manufacturer clamping unit Clamping force: 1300 kN/ 130 tons Distance between tie bars: 420 x 420 mm Mold mounting platens: 570 x 570 mm Ejector stroke: 175 mm / 40 kN Opening stroke: 500 mm Tool installation height: 250 mm Distance between platens: 750 mm max. Injection unit Injection volume: 145 ccm Injection weight: 127 g Cgu3U8W0U Screw diameter: 35 mm Injection pressure: 2500 bar Extras Itsdpfx Aevimd Nsbbjf Hydraulic core pull - Available immediately from our warehouse in Hanover, free on delivery or free to your door against freight reimbursement - Functionally tested (guaranteed function until first commissioning)

Condition: excellent (used), machine/vehicle number: WSM00000002001703, first registration: 08/2006, axle configuration: 2 axles, wheelbase: 7,500 mm, color: other, total length: 12,190 mm, total width: 2,600 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, loading space length: 11,680 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, Year of construction: 2006, Equipment: tail-lift, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Empty weight: 8.800 kg Carrying capacity: 24.200 kg GVW: 33.000 kg Functional Tail lift: dhollandia DHLSU 11, tail lift, 2999 kg Cooling engine: diesel and electric (4638 operating hours diesel) Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: OJ-83-JF = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Itjdpfx Aboy Af Ewebef Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), machine/vehicle number: WSM00000002001318, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 02/2006, loading space length: 11,640 mm, loading space width: 2,490 mm, loading space height: 2,490 mm, total length: 12,200 mm, total width: 2,600 mm, wheelbase: 7,460 mm, color: other, Year of construction: 2006, Equipment: tail-lift, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg; Steering Weights Itodpey Af A Njfx Abbjf Empty weight: 9.120 kg Carrying capacity: 23.880 kg GVW: 33.000 kg Functional Tail lift: BAR CARGOLIFT, 3000 kg Cooling engine: diesel Maintenance, history and condition APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Financial information Price: On request Identification Registration number: OJ-71-FV = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 2005, operating hours: 30,627 h, pressing force: 133 t, total width: 1,740 mm, total height: 2,375 mm, overall weight: 10,200 kg, travel distance X-axis: 600 mm, product length (max.): 4,060 mm, number of axes: 6, This 6-axis TRUMPF TrumaBend V 1300 was manufactured in 2005. It features a press force of 1300 kN and a bending length of 3230 mm, making it suitable for various bending applications. The machine has a robust weight of 10,200 kg and offers a maximum backgauge range of 860 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V 1300 press brake we have for sale. Contact us for further details. • Free pillar passage: 2690 mm • Throat depth: 420 mm • Table width: 120 mm • Installation height: 385 mm (Standard) / 615 mm (Extended Height) • Working height (with 100 mm die): 1050 mm • Beam stroke: 215 mm (Standard) / 445 mm (Extended Height) • Beam positioning accuracy: 0.005 mm • Beam inclination: ±10 mm • Y-axis rapid/working/return speed: 220 / 0.1–10 / 220 mm/s • X-axis travel: 600 mm; positioning accuracy: 0.04 mm; speed: 0–1000 mm/s; max backgauge range (X): 860 mm • R-axis travel: 250 mm; positioning accuracy: 0.08 mm; speed: 0–330 mm/s • Z-axis travel: 2400 mm; positioning accuracy: 1.00 mm; speed: 0–1000 mm/s • I-axis: Lower tool displacement (pneumatic or CNC-controlled) • V-axis (crowning): Manual or CNC-controlled • Control: TASC 6000 with 15" TFT screen • Storage: 2 × 40 GB hard drives • Interfaces: Parallel, RS232, USB, Ethernet • Electrical connection (connected load): 23 kVA • Pneumatic connection: 6 ± 1 bar • Hydraulic oil volume: 208 liters • Input voltage (measured): 401 V (target 400 V) • Control voltage (measured): 25.70 V (target 24 V) • After-run travel/time: 5 mm (at 220 mm/s) / 33 ms • Total machine hours (05.03.2026): 57,547 h • Total hydraulic hours (05.03.2026): 30,627 h Itedpey A Inbsfx Abbjf Additional equipment • BendGuard safety system • Foot switch included • Optional available: ACB Measuring Tools • The Hydraluk cylinder is slightly leaking but still works Technical Specification Bending Length 3230 mm