Used Grob-Werke C6 for sale (1,124)

Condition: used, Year of construction: 2007, operating hours: 361 h, lifting height: 6,100 mm, Year of manufacture: 2007 Drive: Wheel Empty weight: 1.860 kg Working height: 810 cm CE mark: yes General condition: average Technical condition: average Visual appearance: average Specification Details Manufacturer Skyjack Model SJ4620 (SJIII 4620) Year of Manufacture 2007 Machine Type Electric Scissor Lift Drive System 24V DC Electric Application Indoor use and level surfaces Certification CE Marked (European version) Performance Specification Details Maximum Working Height 8.10 m (26 ft 7 in) Maximum Platform Height 6.10 m (20 ft) Platform Capacity 590 kg (1,300 lb) Maximum Occupants 3 persons Gradeability 25% Travel Speed (Stowed) Approx. 2.9 km/h Travel Speed (Raised) Approx. 1.0 km/h Platform Specification Details Platform Length 2.13 m Tsdpfxjz H Igto Ahmoc Platform Width 1.07 m Extension Deck Length 1.20 m Total Extended Platform Length Approx. 3.33 m Dimensions Specification Details Overall Length 2.31 m Overall Width 1.17 m Overall Height (Rails Up) 2.07 m Wheelbase Approx. 1.75 m Ground Clearance Approx. 0.10 m Weight Specification Details Machine Weight 1,860 kg Maximum Platform Load 590 kg Tires and Drive Specification Details Tire Type Solid Non-Marking Tires Tire Size 16 x 5 x 12 Drive Configuration 2-Wheel Drive Inside Turning Radius Approx. 0.71 m Outside Turning Radius Approx. 2.64 m Safety Features * Proportional controls * Emergency lowering system * Tilt alarm with drive cut-out * Pothole protection system * Automatic braking system * Overload protection * Dual holding valves on lift cylinders * Emergency stop controls at both platform and ground stations Electrical System Specification Details Power Supply 24V DC Battery Pack 4 × 6V Deep-Cycle Batteries (configuration may vary) Charger On-board Automatic Battery Charger Transport Information Specification Details Transport Length 2.31 m Transport Width 1.17 m Transport Height 2.07 m Transport Weight 1,860 kg = More information = Please contact Bas Sindorf , ) for more information

Year of construction: 1988, condition: ready for operation (used), functionality: fully functional, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is in operational condition and can be demonstrated by prior arrangement. - The machine has undergone a subsequent technical modification. This provides a second, higher speed for processing smaller tube dimensions. Tsdez Hcp Njpfx Ahmjc - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used for preparing or attaching various profiles. - The control panel has been expanded. This now allows up to 10 set values to be pre-programmed. - The existing standard tools are part of the machine. All spindle diameters are 60 mm. - The original operating manual is available. - The scope of supply includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light spindles Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - In total, 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. Disassembly, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned shipping company. Subject to prior sale and errors in this offer.

Year of construction: 1988, condition: used, Module filter, free-standing with 4 stainless steel feet with adjusting screws Volume: 197 l Operating pressure: 10 bar Max. operating temperature: 121 °C Length: 0,442 m Width: 0,442 m Height: 1,93 m Material: Stainless steel Base construction: standing on feet Features: Closure with 12 clamp screws; tank connections DN 50; with all fittings, pressure gauge Height of the sieve pipe: = 0.99 m; diameter of the sieve pipe 47 mm Tedpoxwy U Hofx Ahmjc

Condition: used, Kieselguhr frame filter. Sterilizable universal filter for liquid filtration with kieselguhr. Stationary filter with square elements in a vertical row arrangement. Hydraulic filter sheet pressing with hydraulic control on the built-in electrical control panel. Additional title: kieselguhr filter, years of manufacture 1979 - 2010 Capacity approx.: 850 hl/h Kieselguhr filter - filtration area approx. 174 - 242m2 Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Tsdpfjxbn Ntox Ahmec Base construction: Frame Features: Filter plates; filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Sterilizable universal filter for sterilization filtration. Stationary sheet filter with square filter elements in a vertical row arrangement, hydraulic filter sheet pressure. Hydraulic control from built-in electrical control panel. Additional title: Sterilisation filter, years of manufacture 1979-2010 Capacity approx.: 750 hl/h Sheet filter - filtration area approx. 356 - 493m2 Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Vertical row arrangement Material: Stainless steel Position: Horizontal Tjdpfx Ahjxbn N Hemjc Base construction: Frame Features: Filter sheets; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Tjdpfx Ahez Duvvsmec Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 Tedpfsu Idnmsx Ahmsc bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, Technical details: tank capacity: 4,2 l Tsdpfxsu Nzwho Ahmsc filter: Inhalt/volume ca. 8,0 l REFUELING PUMP; GASOLINE PUMP WITH ENGINE; FUEL PUMP Comes from military stock. The pump is gasoline powered. It refuels fuel into fuel tanks e.g. car; truck. Mix gasoline with two-stroke engine oil in the ratio 25:1. There are 4 pieces of pumps for sale. With 2 nozzles! *

Condition: ready for operation (used), Year of construction: 2003, CNC Milling Machine OPS Type OPS HSC 600 Year of manufacture 2003 CNC control system Andronic 3D path control with Ethernet interface Tjdpfx Ajz Huz Rohmjc Travel distances X/Y/Z 625/375/350 mm Tool changer based on Erowa system, 40 positions Spindle speeds 5000 – 40,000 rpm Fixed table, load capacity up to 600 kg Travel speed up to 20 m/min Repeatability 0.002 mm Tool changer, 32 positions Spindle HSK 32 E Drive power 9 kW Weight 3500 kg Price: Euro 3,750.00 (plus VAT), ex works

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Max. turning diameter. 400 mm Turning length. 650 mm Circumferential diameter. 600 mm X-axis travel. 275 mm Z-axis travel. 700 mm Bar capacity. 85 mm Main spindle. 3,400 rpm for 85 mm bore Spindle nose. A8 / DIN A8 Chuck Driven tools. MC = Milling/driven tools Control system. Siemens 16-station BMT45 turret, axial - all stations driven Chip conveyor in the tailstock High-pressure pump, 15 bar Tsdpfx Aez Hyy Ejhmjc Siemens Sinumerik One Measuring probe for tool measurement in the work area Direct measuring system in the X-axis Automatic door

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,738 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: i series, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DOOSAN VC 630/5AX was manufactured in 2017. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a robust table size of Ø 630 mm and can accommodate workpieces up to Ø 730 x 500 mm with a maximum weight of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5AX vertical machining centre we have for sale. Contact us for further details. • A axis travel: +30° ~ -120° • C axis travel: 360° • Rapid feedrate (X/Y/Z): 40 / 40 / 36 m/min (1574.8 / 1574.8 / 1417.3 ipm) Tsdjz Hwgpepfx Ahmjc • Rapid feedrate (A/C): 20 / 30 r/min • Table size: Ø 630 mm (Ø 24.8 in) • Max. workpiece size: Ø 730 x 500 mm (Ø 28.7 x 19.7 in) • Max. workpiece weight: 500 kg (130.1 lb) • Total operating hours (ACCESO): 5679 H 6 M • Total working time (TMP LAV): 2748 H 23 M 44 S • Total cutting time (TEMPO TAGLIO): 2400 H 32 M 35 S • Total parts count (PEZZI TOTALI): 103 Additional equipment • Chip conveyor

Year of construction: 1975, condition: used, Stationary sheet filter with quadratic filter elements in a row. Additional title: sterilisation filter Capacity: 140 hl/h Number of plates: 119 plates Length: 7500 mm Width: 1600 mm Tsdpovcqzljfx Ahmsc Height: 2000 mm Formats: Quadratic filter elements - 100 cm x 100 cm Layer patterns: Vertikale Reihenanordnung der Filterelemente

Year of construction: 1979, condition: used, Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel. Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979 Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108m2 KG; 18m2 Sheet with beer filtration Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Todjvcqn Sopfx Ahmec Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: used, Year of construction: 2005, operating hours: 130,948 h, functionality: fully functional, machine/vehicle number: 155136, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production cycle. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It is a robust design from a reputable manufacturer, ensuring reliable and precise operation. Tjdpez Enu Ijfx Ahmoc The machine can be inspected by prior arrangement. Technical documentation is available. Assistance with organizing loading is provided.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0520090257, center height: 230 mm, spindle bore: 58 mm, swing diameter over cross slide: 270 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 30 rpm, type of input current: three-phase, swing diameter over bed slide: 460 mm, turning diameter over cross slide: 270 mm, overall weight: 1,810 kg, turning diameter: 460 mm, turning diameter over bed slide: 460 mm, input voltage: 400 V, rotational speed (min.): 30 rpm, rotational speed (max.): 2,000 rpm, total height: 1,370 mm, total length: 2,750 mm, total width: 1,080 mm, bed width: 300 mm, quill diameter: 60 mm, quill stroke: 130 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, Torno Mecânico Convencional C6246VX / 1500mm - Ano 2020: Torno mecânico universal com 460mm de giro sobre a bancada e 1500mm entre pontas. Motor trifásico 400V/50Hz. Equipado com visor digital (DRO) de 2 eixos, torre porta-ferramentas de mudança rápida, sistema de refrigeração e proteção de segurança articulada no fuso. Máquina em bom estado de conservação, adquirida em 2020 e utilizada em ambiente de I&D. Ideal para oficinas de manutenção, ferramentaria ou produção de pequenas/médias séries. O comprador deve organizar/tratar da recolha. IVA incluído no preço Conventional Mechanical Lathe C6246VX / 1500mm - Year 2020: Todpfx Ajzxrkiohmec Universal mechanical lathe with 460mm swing over bed and 1500mm between centres. Three-phase motor, 400V/50Hz. Equipped with a 2-axis digital readout (DRO), quick-change tool post, coolant system, and a hinged safety guard over the spindle. Machine in good condition, purchased in 2020 and used in an R&D environment. Ideal for maintenance workshops, toolrooms, or small/medium-batch production. Buyer must arrange collection. VAT included in price.

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options Todpfxew Uab Aj Ahmec • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: good (used), 1 used water-cooled spot welding machine Technical data: Max. welding power: 23.7 kVA Rated power at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Coolant flow rate: 4 l/min Weight: 77 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Tsdpfxjy Naq Io Ahmsc DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2002, - Brand : Oil & Steel / Nissan - Type : Scorpion 130 - Year of manufacture: 2002 - Hours: 4294 hours - Odometer: 61,205 km. - Weight: 3340 kg. - Drive: Diesel - APK: Working height: 13 meters - Lateral reach: 8 meters - Lifting capacity: 220 kg. - Aerial work platform book available - CE document available Tjdpez Hw Nkjfx Ahmec - Safety inspection possible - Dutch license plate - Export license plate possible - Video on our website - Trade-in and transport possible *Type: Scorpion 130 * Brand: Socage / Iveco * Construction year: 2002 * Hours: 4294 uur * Km. position: 61205 km. * Weight: 3340 kg. * Working height: 13 meters * Lateral reach: 8 meters * Lifting capacity: 220 kg. * APK: * Drive: Diesel

Year of construction: 1991, condition: excellent (used), Candle filter VelaCart B750, manufactured by Seitz-Filter-Werke Type: VELAcart B750 - 16H07 DN 080 Tedpfjfbckuex Ahmec Year of manufacture: 1991 Manufacturer's serial number: 1992 Filter element: Candle Volume: 105 liters Clamp screw type: M20 x 85 A2 (10 pieces) Candles: Quantity: 16 pieces Length: 73 cm Mesh size: 5 x 3 mm (length x width) Container: Permissible operating overpressure (bar): Liquid 10 / Gas 10 Permissible operating temperature (°C): Liquid 85 / Gas 85 Dimensions: Height: approx. 1.78 m Width: approx. 56 cm Weight: approx. 150 kg In very good condition!

Condition: used, Technical specifications: Max. blade diameter: 300 mm Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW Tsdpfjzht Saex Ahmoc

Condition: ready for operation (used), functionality: fully functional, turning length: 590 mm, turning diameter: 300 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel in X-axis: 221 mm Travel in Z-axis: 590 mm Swinging diameter: 300 mm Turning length: 590 mm Swinging diameter over bed: 425 mm Spindle speed: max. 4,500 rpm Spindle bore: 65 mm Tjdoz Ahxkjpfx Ahmoc MACHINE DETAILS Control system: Fanuc

Condition: used, Year of construction: 2002, - Brand: Niftylift - Type : 170 HDE - Year of manufacture: 2002 - Hours: No hour counter Tjdoz Hl Nljpfx Ahmoc - Weight: 1970 kg. - Working height: 17 meters - Lateral reach: 8.7 meters - Bi energy - Battery 24 Volt - Diesel / Kubota - New safety inspection possible - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Niftylift *Type: 170 HDE * Construction year: 2002 * Hours: No hours counter * Weight: 1970 kg. * Working height: 17 meters * Lateral reach: 8.7 meters Aerial work platform book: Yes CE document: Yes Maintenance history: Yes Video on website: Yes

Condition: used, mileage: 12,000 km, power: 103 kW (140.04 HP), first registration: 01/1950, fuel type: diesel, axle configuration: 4x2, color: grey, driver cabin: other, gearing type: mechanical, Year of construction: 1950, Vehicle location: Bovenden, Tjdpfxjvhgzrs Ahmoc Body: 3-sided tipper body Vomag body type H6, 6 cylinder engine VEB Dieselmotorenwerke Schönebeck / Elbe, restored collector's vehicle, vehicle was assembled from parts of the 40s and 50s, year of construction can therefore not be determined exactly !!! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors! - .

Condition: used, Year of construction: 2012, functionality: fully functional, IMA AC60 A OVERWRAPPER Fully automatic overwrapping machine. All components are fully accessible thanks to the balcony design. Ideal for pharmaceutical products. Built in 2012. CHARACTERISTICS - easy cleaning and maintenance - with high-speed stacking unit - film transport by pincers - scissor knife - transversal edge-sealing - driven movement of bottom and lateral film folders PRODUCTION Tedpfx Aoz E Icfjhmjc - Max speed/output: 60/80 ppm - Stacking unit output: up to 225 layers/min - Boxes dimensions: 50 x 23 x 60 - 220/280 x 100 x 220 mm - Film length: 100 - 450 mm - Wrapping film materials: cellophane; PE; PP; PVC; KRAFT - Electricity usage: 208 V/3 phases

Condition: good (used), Year of construction: 2005, operating hours: 10,762 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, CNC Milling Machine DMG DECKEL MAHO DMC 635 V TECHNICAL DATA: - Year of manufacture 2005 - Program run time 10 762 hours - Power-on time 37 612 hours - X 635 mm - Y 510 mm - Z 500 mm - Control SIEMENS SINUMERIK 840 D powerline (ShopMill) - Spindle speed max. 8 000 rpm - Table size 790 x 560 mm - Tool magazine 20 positions (SK40) - Machine dimensions 3.4 x 2.4 x 2.5 m - Weight approx. 4 000 kg EQUIPMENT: - Through-spindle coolant - Flushing system - Chip conveyor - Handwheel - USB - Technical and electrical documentation Todpfxjz Hkw Uj Ahmjc The milling machine is in very good technical condition: spindle fully overhauled, guideways and ball screws in very good condition. The machine is connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.