Used Gsl Coil Spring for sale (6,730)

Condition: used, machine/vehicle number: Nr. 84064. Nr. 86016 Nr. 82013, 3 winding machines, 4-fold flyer Winding diameter: 40 mm, laying width: 150 mm Max. wire diameter: 1.0 mm Nodpfxeylzurs Aa Rjda HKW 2/7 no. 82013, 4-fold reversing bar Tool EI 84/20/5

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft Njdpewvv Rqofx Aa Rsda - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/1990, suspension: steel, tire size: 425/65-R22.5, Year of construction: 1990, Equipment: ABS, = Additional options and equipment = - Leaf suspension Nsdow I D Imepfx Aa Rsda - Drum brakes = Remarks = 1990 FLANDRIA 20FT chassis with leaf springs (3 leaves), ROR axles with drum brakes (2 x 10,000 kg), 20FT, 425/65-R22.5 tires (L: 8/6 mm; R: 8/11 mm), unladen weight: 3,095 kg, permissible total weight: 30,000 kg, Belgian registration with valid technical inspection until: 12.06.2026 = Further information = Axle configuration Axle make: ROR DRUM Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 50%; Tire tread right: 50% Rear axle 2: Tire size: 425/65-R22.5; Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 70% Weights Unladen weight: 3,095 kg Payload: 26,905 kg Gross vehicle weight: 30,000 kg Functional Body make: FLANDRIA OP CC 2 A Condition General condition: average Technical condition: good Visual condition: average Further information Please contact Arne Honingh for further information.

Condition: used, Year of construction: 1988, gebraucht 1988 070009 prompt, Zwischenverkauf v Deutschland 1600 € 1 400 mm 700 mm 1500 mm 2050 mm 820 mm 1000 mm with brake with 2 spare mandrels Nedpfxswirq Te Aa Roda

Condition: used, Year of construction: 1990, Gebruikte ponsmachine van Kingsland Type: 55 P 625 Nedpfx Aasyu Sqij Roda Capaciteit: 55 ton Keeldiepte: 625 mm Bouwjaar: 1990

Year of construction: 1996, condition: used, functionality: unexamined, machine/vehicle number: 2566, Marsilli coil winding machine with 6 spindles, No. 437 Nedoyuthiepfx Aa Reda Type WM 2002/6 - 100, serial no. 2566

Condition: used, Single-acting hollow piston cylinder with spring return ENERPAC Hydraulic ram, hydraulic cylinder, hollow piston cylinder, machine lifter, clamping cylinder Model: BRH 1003, predecessor of RCH 1003 Lifting capacity: 100 tons Operating pressure: 700 bar Piston stroke: 76 mm Piston rod diameter: 127 mm Outer diameter: 215 mm Closed height: 255 mm Through-hole diameter: Ø 79 mm Internal thread: Ø108 mm 12G" Hydraulic connection thread on cylinder: M18x1.5 - Hydraulic connection with high-flow quick-coupling type CH-604, thread M30x1.5 mm Net weight: 55 kg Very good condition Nsdpfx Aoxciuaoa Reda 16 units available, price per unit

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Nedey D S Sgjpfx Aa Roda

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Ndsdpfey Ep Ryox Aa Rja

Condition: used, SPRINGER revolver log turner Nsdpfxjzdq N Ie Aa Reda

Condition: new, Ø2.0mm/2-Axis compression spring machine. Cam-driven. Nsdpfx Aolf Ek Doa Rjda

Condition: good (used), Features: Manufacturer: Interroll Nedpfofgvwlex Aa Reda Condition: good (used) Mounting length: 630mm Roller length: 610mm Roller diameter: 60mm Rollers with spring axle Material: Steel Stock: 39 pieces Price per piece Tailored solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic systems for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or additional components such as picking shelves or containers.

Condition: used, Year of construction: 2006, machine/vehicle number: M 91317, Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Nodpeuqd Udjfx Aa Reda Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm Standard configuration Coil loading unitStroke 500 mm Load capacity 5000 kg Material width max. 500 mm

Condition: new, type of cooling: air, For sale: 8x Nordmann AT4 humidifiers. Brand new units, immediately deployable and easy to refill. Suitable for industrial applications and HVAC systems where precise humidification is required. Quantity: 8 units Condition: New Immediately available Ndsdpfotncckex Aa Rja Note: Sale as a set Transport available on request

Condition: used, maximum load weight: 32,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2016, loading space length: 13,630 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, Equipment: ABS, * NET TOP PRICE * SAF axles with disk brakes * 2 x lift axles (1/3) * Coil trough 9 meters * Lashing eyes l&r * Edschaverdeck * Portal doors * Tool box * LxWxH: 13.63 x 2.48 x 2.72 * Unladen weight: 6,700 kg * German vehicle * good condition Njdpfx Aaouc Inwj Roda Subject to errors and prior sale !!! Sale takes place under exclusion of any warranty! - Mi goworim po Russki - We speak english - Mówimy po polsku

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW Njdpfscdrmmjx Aa Roda coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Year of construction: 2026, condition: new, functionality: fully functional, working width: 400 mm, drive type: Direktgetriebe, funnel diameter: 400 mm, nominal power: 7.5 kW (10.20 HP), number of blades: 33, rotational speed (max.): 150 rpm, rotor diameter: 300 mm, rotor width: 400 mm, sieve perforation: 6 mm, Direct driven staggered rotor Special knife design makes adjustment unnecessary Easy access for maintenance and cleaning Gegqxgljx Slow rotor speed creates less noise and dust Easily customizable to suit different applications Rotor diameter (mm) 300 Rotor width (mm) 400 Rotor speed (rpm) 150 Drive capacity (kW) 7.5 Rotor knives (pcs) 33 Ndjdpfjn Hqxfjx Aa Roa Stator blades (rows) 2 Screen size (mm) > 6 Weight approx. (kg) 550

Condition: ready for operation (used), Lot of Well Ascent copper coil/winding wire Various widths and thicknesses: 0.274 x 2.070, 0.190 x 2.760, 0.080 x 1.000, and more. Total of 25 reels Copper wire weight: ~115 kg (approximate) Ndsdeym Amfopfx Aa Roa Manufacturer: Well Ascent

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Ndodezmuntspfx Aa Rea Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Year of construction: 1991, condition: good (used), coil weight: (2 x 15 t) / 1 x 30 t coil width: max. 1.900 mm Ndjdpfx Aasbh Dg Ss Rsa coil OD: max. 1.900 mm

Condition: excellent (used), Year of construction: 2002, coil weight: 25,000 kg, coil width: 1,550 mm, sheet thickness (max.): 4 mm, strip width: max. 1.550 mm strip thickness: 0,4 - 4 mm coil weight: 25 t mandrel Ø: 508/610 mm coil OD: max. 2.000 mm Ndjdjy Nxn Eopfx Aa Roa speed: max. 135 m/min working direction: left-> right

Condition: good (used), SPRINGER Log Cutting, Packaging, and Sorting Line The SPRINGER packaging and sorting line offered is a robust and high-performance system for the continuous transport and processing of logs. The line is in very good used condition, is immediately available, and can be dismantled and loaded for transport on short notice. Technical Data * Manufacturer: SPRINGER * System Type: Log Conveyor Line * Overall Length: approx. 33,000 mm * Package Dimensions: 1,200 × 1,200 mm * Log Length: 2.90 m - 5.50 m * Conveyor Speed: 80 pieces/min, approx. 8 cycles/minute * Capacity: approx. 80 cycles * Conveyor Direction: from left to right * Steel Structure: including maintenance platforms, railings, and foundations * Configuration: material feed, tilting table, singulation, cut-off saw, reject box, transfer stations, stacking, and removal Special Features: * Very good used condition * Immediately available Nodpfxezv Trie Aa Reda * Robust industrial design from SPRINGER * Ideal for sawmills and log processing * Complete with steel structure and maintenance platforms

Condition: good (used), Händi P3 consisting of 78 galvanized uprights (480 cm x 105 cm) and 253 grey beams (270 cm x 10 cm). Of these, 11 uprights are slightly damaged. Ndedpfoywd Rnox Aa Roa Robering SLP SL consisting of 53 uprights (400 and 450 cm x 110 cm) and 266 orange beams (270 cm x 11 cm). For sale only as a complete package.

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Ndodpfxji El Uco Aa Roa

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line Ndedpfx Ajyzbm Uja Rea 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries