Used Guideway for sale (376)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails Kedpfx Ahjyaqgyj Ajdp - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication Kodpfxjyh Ri Is Ah Asdp - Control cabinet cooler - Spindle oil cooler - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted Kodpfx Ahou N D Rqs Ajdp - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: like new (used), Year of construction: 2008, Retrofitted: 2026 Numerical control: SIEMENS 840D Kjdeyvwchspfx Ah Aodp Technical features Dimensions Table dimensions: OptionalNumber of T slots: UndefinedT slots dimensions: Undefined Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 0 / 2500 mm (adjustable) Milling head Head type: Universal Auto-indexing UAD (0,1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 20 - 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table (kg/m2): OptionalMachine weight approximate: 70000 kgMachine dimensions approximate: 17560 x 12800 x 4270 mm Accessories Guarding: pendular with automatic front door and perimetral wire-mesh fenceAutomatic tool changer: ATC80 with electrical motorsChip conveyor: 1 front longitudinal and 1 transversalElectronic handwheel: 6FX2007-1AE14 SiemensCoolant: external internal high-pressure through spindleOperator’s cabinet: adjustable in vertical traverse Other technical features 2 ROTARY TABLES:Model:   DEMMELER DRLTS1800Table surface: 2400 x 1800 mmMaximum load on table: 40 TT slots number: 9T slots dimensions: 22 mmRotary axis: HydrostaticMaximun speed (S1/S6): 3.4 / 5.4 rpmClamped tangencial torque: 175000 NmW axis: 1500 mm.Maximum feedrate: 20000 mm/min.Quantity of guideway (W axis): 4 Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: new, Maximum turning height: 250 mm Turning diameter over slide: 350 mm Turning diameter in the curve: 695 mm Distance between centers: 1500 mm Spindle nose: DIN 55029, cam lock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Motor power: 5.5 kW Dimensions L x W x H, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Kdsdpogt E Ilofx Ah Asp Features: - Toolmaker's precision - Stepless speed control (3 pre-selected stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in the main spindle - Easy-to-operate feed drive with a large feed range, running in a closed oil bath. - Low-maintenance central lubrication system - Removable bridge - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - Frequency inverter - Machine stand with a high splash guard and integrated lighting - Chip tray that can be pulled out to the front - 3-jaw chuck - Fixed steady rest - Traveling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop push buttons and a foot pedal with an electrical braking system - End-switch protected chuck guard, tool holder guard, and cover for the lead and feed screw according to European safety standards CE - Coolant system - Fixed center - Reduction sleeve for the main spindle - Operating tools in a toolbox

Condition: new, Made in Italy. Ksdpfx Ahod Nk Ncs Aodp Maximum turning height: 300 mm Turning diameter over bed: 600 mm Turning diameter over slide: 380 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm Motor power: 9.2 kW (optional equipment / standard: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide travel: 340 mm Top slide travel: 150 mm Tailstock ram diameter: 85 mm Tailstock ram travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital readout - Automatic lubrication of the guideways - LED lighting - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick-change tool holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g., Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: chuck guard with Plexiglas panel, secured by microswitches. Tool holder guard with Plexiglas panel. Rear splash guard over the entire length. Lead screw and feed screw protection by light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip container on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price including 3-axis digital readout.

Condition: new, Universal tool milling machine according to DIN 8615. The torsion-resistant machine stand made of MEEHANITE® quality casting and the high-precision, hardened and ground guides in all axes guarantee high precision and durability. With the 3-axis digital display, all values can be called up directly and with the user-friendly control panel on the jib arm (OPTION), it can be positioned individually. Clamping area of the fixed angle table: 900 x 500 mm Kdedpfxouxt N Is Ah Asp Max. Workpiece weight: 360 kg Horizontal and vertical tool holder: ISO 40 Main spindle motor power / 100% ED: 3.75 kW Power feed motors X/Y/Z-axis: 1.0 / 1.0 / 1.5 kW Total connected load: 7.4 kVA Speed range: 40 - 3800 1/min Speed steps: 18 Manual drill sleeve stroke: 120 mm Swivel range: +/- 90 Travel X (automatic/manual): 600 mm Travel Y (automatic/manual): 460 mm Z travel (automatic/manual): 380 mm Feed range, infinitely variable X/Y/Z: 10 - 650 mm/min Rapid traverse: 1000 mm/min Dimensions LxWxH, approx.: 1850 x 1650 x 1900 mm Weight, approx.: 1780 kg Equipment: - 3-axis digital display (e.g. FAGOR® Innova), with various comfort functions, on user-friendly swivel arm (OPTION) - DC servo motors for all X/Y/Z axes, e.g. from DELTA® - Spindle concentricity max. 0.005 mm, incl. test report to DIN 8615 (SKF®/NSK® roller bearings) - Spring-loaded safety handwheels in all axes, e.g. from GANTHER® - Torsion-free machine bed made of MEEHANITE® quality casting - High-precision, hardened and ground guideways in all axes with TURCITE®-B coating - Backlash-free HIWIN® precision ball screws in all axes - Electrical overload protection in all axes - Multi-adjustable spindle protection device secured via micro limit switch - Automatic interval central lubrication - Drilling quill - Swivel-mounted control panel on extension arm (approx. 1,600 mm) (OPTION) - Hydraulic tool clamping - SIEMENS®, BALLUFF® electrical equipment - Coolant device - Horizontal device - LED machine light - Spacious chip collection tray - Test report according to DIN 8615 - Operating tool - Operating instructions, spare parts list, incl. electrical circuit diagrams etc. in German - CE

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed Kjdsp Dt Ttspfx Ah Aedp - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light Kodsp Dt T Nspfx Ah Aedp - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors Kdjdjp Dt Uijpfx Ah Aop - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: good (used), Year of construction: 1992, Measuring Range X – axis 700 mm Y – axis 600 mm Z – axis 450 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C wax. workpiece weight 500 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S Ksdpfshrulkjx Ah Asdp DC motors all axis Guideways air bearings Tilt&swivel head Renishaw PH1 (PH10 on demand) Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5

Condition: refurbished (used), Year of construction: 2004, Complete refurbished Sheffield D12 with very new controller; probe, software etc. (2017) - 3D measuring machine with liner guideways (no air necessary) - Machine is moveable (wheels) - Measuring range X / Y / Z = 500 x 900 x 400mm - Accuracy acc. to ISO 10.360 MPE = 4,9 + 4L/1000µm - Pantec Eagle Controller Kdsdpefmkxijfx Ah Aep - Temperature control on demand (new) - Renishaw PH1, on demand PH10T (used or new) - Renishaw TP20 (used or new) - Renishaw MCR200 probe change rack (on demand) - Software Inspect3D Inca Professional (new + options) - Computer HP Workstation W10 (like new) Machine is ready for demonstration

Condition: ready for operation (used), Year of construction: 1992, Measuring Range X – axis 700 mm Y – axis 1000 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm at temperature range 18 … 22 °C Kjdpfx Aogvg I Eoh Aedp wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1, option PH9 or PH10M Probesystem Renishaw TP200 Computer Windows 10 Workstation Software MCOSMOS-1 V3.5

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady. Kdjdpfozgw Tfox Ah Aep

Condition: excellent (used), Year of construction: 2015, DOOSAN DNM 750 L II Highly Rigid Vertical Machining Centre CNC Hours on display: 2,513 h; Travel distance X-axis: 2,160 mm; Travel distance Y-axis: 762 mm; Travel distance Z-axis: 650 mm; Table size: 2160 mm x 760 mm; Maximum Table Load: 1800 kg; Spindle Speed: 12.000 RPM (Direct Drive); Tapper: Big-Plus CAT 40 / BT40 (Dual-contact for extra rigidity); Power: 15.6 kW; Torque: 165.5 Nm; Tool storage Capacity: 30; Tool Change Time: 1.3 sec (Tool-to-Tool); Rapid Traverse (X/Y/Z): 24 m/min (945 ipm); Guideways: heavy-duty 45 mm roller linear guideways, Kjdpfjzk Nfhox Ah Asdp Serial number: MV0062-000372; Machine still in production, hours on display may increase; Sold without accessories and tools.

Condition: like new (used), Year of construction: 2011, measuring range X-axis: 505 mm, measuring range Y-axis: 705 mm, measuring range Z-axis: 405 mm, Mitutoyo CMM Crysta Apex C574 Measuring Range X – axis 505 mm Y – axis 705 mm Z – axis 405 mm Accuracy acc. ISO 10360 E = [1,7 + 3,0L/1000] µm at temperature range 18 … 22 °C max. workpiece height 445 mm wax. workpiece weight 180 kg base material granit dimension measuring table 638 x 1160 mm fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0001 µm Kdedpezilyrefx Ah Ajp DCC Controller Mitutoyo UC200 DC motors all axis Guideways air bearings Tilt&swivel head Renishaw PH10M/PHC10-2 Probesystem Renishaw SP25M/SM25-1 Probe Changer FCR25 3x Computer Workstation (Windows 10) Software MCOSMOS-1 V4.2

Condition: new, Z-MaT CNC/Cycle Lathe FTL660-2000mm Control: Siemens 828D Shop Turn, 15" Touch Flat bed with linear roller guideways and telescopic cover Hydraulic 3-jaw chuck 380 mm Ø Max. swing over bed: Ø700 mm Max. workpiece length: 1800 mm (with chuck) Max. turning diameter over cross slide: Ø480 mm Spindle Spindle bore: Ø120 mm Max. bar capacity: Ø110 mm Spindle nose: A2-11 Max. spindle speed: 1000 rpm Spindle power: 22/30 kW Tooling 12-position servo turret Tailstock Ksdpfowwt Trsx Ah Aedp Hydraulic tailstock MK5 Quill stroke: 100 mm Tailstock travel: 1850 mm (manual) Axes X-axis travel: 370 mm Z-axis travel: 2000 mm X/Z-axis rapid traverse: 15/15 m/min Bed type/guides: box bed/linear roller guides Bed width: 600 mm Accessories: Manual steady rest 110–260 Overall dimensions (L×W×H): 4.5 x 1.96 x 2.1 m Weight (approx.): 6.4 t The machine will be displayed at EMO, Hall 12/D10, and will be available immediately afterwards. Further sizes of this series can be found in the PDF.

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM CNC Router (2100 × 4200 mm) 1. Worktable Sectioned vacuum worktable with four independent vacuum zones, manufactured from rigid and durable HPL panels. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces of various sizes. The worktable surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. 2. HQD Spindle High-performance 9 kW brushless HQD spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System Energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, delivering excellent machining quality while maintaining high feed rates. Brushless servo motors drive the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for maximum durability and long-term reliability. Professional HIWIN linear guide rails are installed on all axes and undergo strict quality inspection. A centralized automatic lubrication system continuously lubricates the linear bearing blocks and ball screw, minimizing maintenance requirements and extending component life. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in improved machining accuracy and superior surface finish. 5. 8-Position Automatic Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump & Dust Extraction Hood (Optional) Four independent vacuum zones for efficient workpiece clamping. 7. Industrial Control System & Software Equipped with the NK-105 G3 CNC control system. Compatible with the latest CAD/CAM software solutions. Optional UCanCAM V13 software available in Polish/English versions. Technical Specifications Working Area 2100 × 4200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Kedpfx Asvupu Uoh Aodp Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 2 × 7.5 kW vacuum pump Software Optional UCanCAM V13 (Polish/English version) Machine Dimensions 5070 × 2870 × 1900 mm Machine Weight 3350 kg

Condition: new, Year of construction: 2026, CORMAK IND 2131 CNC Router (2100 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with six independent vacuum zones, manufactured from rigid and durable HPL panels, individually controlled directly from the electrical control cabinet. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are equipped with sealing plugs, allowing efficient clamping of workpieces in various sizes. The table surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. The table is equipped with pneumatic positioning stops on two axes, enabling fast and repeatable positioning of workpieces in exactly the same location. 2. Spindle High-performance 9 kW brushless spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System High-efficiency YASKAWA AC servo drives, controlled by a digital CNC controller, delivering outstanding machining quality while maintaining high feed rates in all axes. Brushless YASKAWA AC servo motors drive the X and Y axes via precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives manufactured from hardened and heat-treated steel, ensuring long-term reliability and accuracy. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in superior surface finish and machining precision. 5. Automatic Tool Changer & Tool Length Sensor Equipped with a 12-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 2 pcs 3–4 mm – 2 pcs 5–6 mm – 4 pcs 7–8 mm – 2 pcs 9–10 mm – 2 pcs Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Industrial CNC Control System The machine is controlled by an industrial SYNTEC CNC controller, commonly used in professional machining centres. Supplied with a handheld control pendant and LCD display. Optional UCanCAM V13 CAD/CAM software available in Polish and English language versions. Technical Specifications Parameter Value Working Area 2100 × 3100 mm Z-Axis Travel 300 mm Kdedpfovup Unex Ah Asp Machine Construction Cast iron gantry / Welded steel frame Drive System 1500 W Hybrid AC LEADSHINE servo motors Table Type Hybrid vacuum table Spindle Power 9 kW Gearbox Shimpo Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 7.5 kW vacuum pump with 8 independent vacuum zones Software Optional UCanCAM V13 (Polish/English version)

Condition: new, Year of construction: 2026, Machine Description 1. Worktable Sectioned vacuum worktable with FOUR independent vacuum zones, manufactured from rigid and durable HPL panels. Each zone features vacuum ports connected via a piping system to the vacuum pump. Main vacuum openings are fitted with sealing plugs, allowing efficient clamping of workpieces in various sizes. T-slots are also provided for manual workpiece clamping when required. 2. HQD Spindle High-quality 9 kW brushless HQD spindle, powered by an inverter with built-in overload protection. High-speed electro-spindle equipped with an innovative air-cooling system. Designed for automatic tool changing (ATC), significantly reducing machining time by eliminating manual tool changes. 3. Drive System High-performance, energy-efficient Leadshine 1500 W AC servo drives with high holding torque (dual drive on the Y-axis), controlled by the NK-105 G3 digital controller, ensuring excellent machining quality at high feed rates. Brushless servo motors driving the X and Y axes through precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. X and Y axis movement is transmitted through HIWIN linear guideways and precision helical rack-and-pinion drives, manufactured from hardened and heat-treated steel for long-term reliability. All axes are equipped with professional HIWIN linear guide rails, which undergo strict quality inspections and testing throughout the manufacturing and assembly process. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining operations, resulting in improved surface finish and machining accuracy. 5. 8-Position Tool Changer & Tool Length Sensor Equipped with an 8-position linear automatic tool changer (ATC), supplied with ISO30 tool holders and ER32 collets. Included collets: 1/2" – 6 pcs 1/8" – 1 pc 3–4 mm – 1 pc 5–6 mm – 2 pcs 7–8 mm – 1 pc 9–10 mm – 1 pc Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Vacuum Pump (Optional) & Dust Extraction Hood Four independent vacuum zones for efficient workpiece holding. Kjdsvupcrspfx Ah Ajdp Pneumatically operated dust extraction hood mounted around the spindle, allowing connection to virtually any dust extraction system while maintaining a clean working environment, improving operator safety, and preserving machining accuracy. Technical Specifications Parameter Value Working Area 2100 × 3200 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System Leadshine 1500 W AC servo drives Table Type T-slot / Hybrid vacuum table Spindle Power 9 kW Spindle HQD air-cooled (oil mist cooling optional) Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump 2 × 7.5 kW (optional) Software UCanCAM V13 (Polish language version, optional) Machine Dimensions 4070 × 2870 × 1900 mm Machine Weight 2050 kg

Condition: used, Hydro-mechanical NC machine vice, VIS - HYDRAULIQUE\nPrecision machine vice, clamp\nType 20700\nYear of manufacture approx. 2000\nJaw width 150 mm\nJaw height 42 mm\nClamping range 0 to 250 mm\nMax. opening width 253 mm\nClamping force 6 tons\nGuideway height 51 mm\nGuideway length 450 mm\n- Hydro-mechanical machine vice\n- Quick adjustment with clamping ball lock in 8-position hole grid\n- Rigid base body, precision ground on all sides\n- Can be clamped horizontally, vertically, or laterally\n- Guideway with 19 mm guide slot\n- Additional set of prism jaws included\nDimensions (L x W x H): 480 x 150 x 107 mm\nWeight: 32 kg\nGood condition Kdodsy Sbxfjpfx Ah Aep

Condition: refurbished (used), Year of construction: 1987, functionality: fully functional, turning diameter: 4,300 mm, faceplate diameter: 4,000 mm, Vertical Turning Lathe SC43 CNC, retrofitted and upgraded with CNC Fanuc 0𝑖-TF Plus Made in Romania by TITAN Year of manufacture: 1987 Kjdpfx Ahey A Iifs Ajdp The machine was completely retrofitted in 2026 Main technical data: FACE PLATE DIA. MM 4000 MAX. SWING MM 4300 MAX HEIGHT UNDER THE CROSSRAIL MM 2000 MAX. LOADING ADMITTED KG 18,000 FACEPLATE SPEED RANGE 1-92 RPM FEEDS RANGE MM/ROT 0.05-5 CARRIAGE RAPID FEEDS MM/MIN 2500 MAIN D.C. MOTOR POWER KW 55 SIEMENS WITH SIEMENS DRIVER MACHINE WEIGHT APPROX. 63 TONS The machine has the following brand new components: - New electrical equipment with parts made by Schneider, Shrack, Siemens, with a new cabinet - New control panel - New micro switches - New hydraulic pump and components - New pump for guideway lubrication, and the entire installation was redone - New CNC Fanuc 0𝑖-TF Plus 55KW Main motor, Siemens, refurbished in 2018 with Siemens driver The main gearbox was checked and refurbished with new bearings. The machine was repainted. We grant a 6-month guarantee for parts. We can send more photos and a video showing the machine’s precision measurements. Do not hesitate to contact us.

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Kdsdpfx Aeumtbrsh Aop Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Kdedpfx Ahswtctyo Ajp Cooling unit for Rittal electric cabinet *

Condition: used, Year of construction: 2024, Used machine Year of manufacture: 2022 Commissioning: 8/2024 As-new condition The heavy-duty worktable made of highly ribbed grey cast iron and the base frame made of welded steel ensure high torsional rigidity and vibration-free operation. Smooth-running and precise sliding table made of anodised aluminium with proven, long-lasting ball contact system on hardened guides, 10-year warranty on guideway wear. Grey cast iron saw unit with permanently precise dual pivot segment guidance and zero-point tilt, 6-year Holzkraft warranty on wear of pivot segments. Equipped with a powerful three-phase motor. Saw blade tilt displayed on a scale at the unit. Large outrigger table with roller facilitates panel handling. Angle-adjustable aluminium telescopic fence with two professional folding stops. Folding parallel fence with quick-release and fine adjustment. Standard features include table extension, table widening, and eccentric clamp. Made in Italy Sliding Table and Worktable: Sliding table length: 2600 mm Sliding table width: 360 mm Sliding table height: 142 mm Worktable length: 840 mm Kedpfx Asxua N Seh Aodp Worktable width: 560 mm Worktable height: 900 mm Saw Unit: Cutting width with parallel fence: 900 mm Maximum crosscut width left of saw blade: 3200 mm Ripping length: 2660 mm Saw blade tilting range: 90 - 45° Maximum cutting height at 90°: 100 mm Maximum cutting height at 45°: 70 mm Note on max. cutting height: Independent of scoring unit Saw blade diameter: 315 mm Note on saw blade diameter: Independent of scoring unit Saw blade speed: 3800 rpm Motor: 5.5 kW The hose visible in the picture is not included in the scope of delivery! Availability: Short term Location: Flörsheim