Used Hbm Bf 60 for sale (22,672)

Condition: new, table length 1600 mm table width 800 mm stroke height 900 mm 310 mm weight max. in kg 500 kg weight of the machine ca. 0,16 t 1,7 x 0,82 x 0,33 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety. Fpedpfx Aoupxgfofuon

Condition: used, Year of construction: 2022, Technical details: Fodpeu Nig Rjfx Afuspn cutting diameter: 128 mm saw band length: 1640 x 13 mm saw band width: 0,64 mm cutting range 90 degrees: round: 128 mm cutting range 90 degrees: flat: 100 x 150 mm cutting range 45 degrees: round: 90 mm cutting range 45 degrees: square: 90 x 75 mm band speed: 24 - 35 - 55 m/min electrical connection: 220 V / Hz. total power requirement: 500 Watt machine weight approx.: 80 kg dimension machine xH: 0,95 x 0,52 x 1,1 m The machine is unused-new, in the original box. The band saw can be moved manually. Application for steel, cast iron and non-ferrous metals. Workpiece clamping by means of clamping jaws by hand wheel, 1x fixed and once movable, clamping range 165mm, swivel range 60°. limit stop for length adjustment max. 85mm i.D. *

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car Fpjdpfstiy Ntsx Afujn 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: new, table length 855 mm table width 500 mm stroke height 900 mm 340 mm Fsdsupw Uhjpfx Afuopn weight max. in kg 500 kg weight of the machine ca. 0,085 t 950 x 550 x 450 mm The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Condition: new, table length 820 mm table width 520 mm stroke height 730 mm weight max. in kg 300 kg 260 mm weight of the machine ca. 0,065 t dimensions of the machine ca. 1,0 x 0,6 x 0,82 m The mobile work and lifting table has an easy-to-use foot pedal to raise the table. You can safely lower the table again using the hand pedal. Fjdpfx Afoupxlueujpn There are four rollers under the table. Two of them are equipped with brakes. The work table is equipped with a fall protection for additional safety.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 600 mm, machine/vehicle number: 3002097/2, TECHNICAL DETAILS Fodpfxsz I Ti Aj Afuepn Temperature range: Ambient temperature to -110 °C Design: Stainless steel mesh belt Belt length: 4,000 mm Belt width: 600 mm MACHINE DETAILS Power supply: 3-phase EQUIPMENT Stainless steel mesh belt Continuous conveyor belt system Suitable for integration into continuous hardening systems

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg Fpodpfxez Hq Ako Afujn - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, working width: 1,100 mm, working length: 2,350 mm, machine/vehicle number: 8081.02, TECHNICAL DETAILS Working length: 2,350 mm Working width: 1,100 mm Fpodpfxjydn Nmj Afuen Max. processing thickness: 35 mm EQUIPMENT double working surface cutting device for the sheet to be processed

Condition: excellent (used), mileage: 420,998 km, power: 427 kW (580.56 HP), first registration: 08/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, loading space length: 4,700 mm, loading space width: 2,550 mm, Year of construction: 2017, Equipment: retarder, trailer coupling, = Additional options and accessories = - Aluminium fuel tank - Coupling - Extra steering axle - Intarder - Light (metallic) rims Fedsywirkspfx Afuopn - Low-noise - Reversing camera - Toolbox - Visor - Xenon lighting = More information = Axle configuration Front axle 1: Steering Rear axle 1: Lift axle; Steering Weights Empty weight: 21.675 kg Carrying capacity: 15.325 kg GVW: 37.000 kg Functional Make of bodywork: HMF 4020-K6 + JIB FJ 600-K4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: used, Coil Width: 12″ – 60″ Fpodpfx Ajihf Tpjfuen Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Fpjdpfjlwtzysx Afuon Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 350 153 09 095, overall weight: 180 kg, input voltage: 400 V, We are offering this ready-to-use Meurer CMW/AL 60/40 angle welding machine, manufactured in 1995. Manufacturer: Meurer Model: CMW/AL 60/40 Year of manufacture: 1995 Welding current range: 60–400 A Fpsdpfx Asz Ii Uzofujn Open-circuit voltage: 60 V Mains voltage: 400 V Frequency: 50 Hz Duty cycle: 60% at 400 A Protection class: IP21 Weight: 180 kg If you have any questions or require further information, please do not hesitate to contact us by sending a message or calling us.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Fjdpfx Afsznkpvjuopn Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Fsdpfsz Ixqxjx Afujpn Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Fsdpfx Aez Inm Aefuspn

Condition: like new (used), Year of construction: 2017, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 380 V, pressing force: 60 t, stroke length: 150 mm, table width: 500 mm, table length: 900 mm, overall weight: 5,600 kg, ram adjustment: 75 mm, stroke adjustment: 75 mm, Equipment: safety light barrier, APA 60 ton eccentric press with air clutch for sale in mint condition Manufacturer: HE Shenzhen HONG-ER Machine LTD type: APA 60 Year of manufacture: 2017 pressing force 60t two-handed operation central fattening Inovance IT600 control Fpodpfx Aju Hautefuen required air pressure: 6 bar stroke length: 150mm number of strokes: 35-90/min table-bear distance: 300mm stroke adjustability: 75mm table size: 900x500mm bear size: 500x360mm total response time: 170ms voltage: 3x380v 50Hz 5.5kw machine weight: 5600 kg

Condition: excellent (used), mileage: 11,000 km, power: 310 kW (421.48 HP), first registration: 12/2023, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), loading space length: 6,300 mm, Year of construction: 2023, operating hours: 750 h, Equipment: crane, = Additional options and accessories = - Heavy duty engine brake - PTO - Visor - Xenon lighting = More information = Axle configuration Fpjdoyll S Uspfx Afuon Suspension: parabolic suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Reduction: hub reduction Rear axle 2: Reduction: hub reduction Weights Empty weight: 21.000 kg Carrying capacity: 10.925 kg GVW: 32.000 kg Functional Make of bodywork: HMF 4020 K6 + JIB FJ 600-K4 CE mark: yes Condition Technical condition: very good Visual appearance: very good Financial information Price: On request

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Fpsdpszlgz Nofx Afujn Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C1400394, Double miter saw, Fom Industrie BLITZ 60, 6.6 m, year of manufacture 2026. Equipped with a second and third intermediate profile support (pneumatically retractable), automatic profile height gauge with mobile sensor and vertical clamp, pneumatic lift roller on the loading side, central conveyor belt for chip removal, chip conveyor belt with inclined end (6.6 m version), software license for cutting with special dimensions and at variable angles, and label printer. Fpjdpfjz Ngh Nsx Afuon

Condition: new, Year of construction: 2025, neu 2025 080091 prompt, Zwischenverkauf v Türkei 51120 € 781.19 € 1 40900 € 60 to 2550 mm Y1 / Y2 und X Achse 160 mm 2150 mm 250 mm 350 mm hydraulisch 120 mm/s 9 mm/s Fodpfx Afswva Igjuspn 70 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 813 mm 104 mm 100 l 5.5 kW 3250 mm 1200 mm 2350 mm 4250 kg Special price for demo machine Like-new condition 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTIONS: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840 D, rotational speed (max.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 100 h, coolant supply: 70 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 4-position pallet changer and 180 magazine slots Year of manufacture: 2007 Control system: Sinumerik 840D Technical data: Spindle speed: 0-18,000 rpm Drive power: 35 kW Torque: Spindle connection: HSK 63 Number of magazine slots: 180 Number of pallets: 2 Pallet size: 500x500 mm Travel distances: X-axis: 630 mm Y-axis: 800 mm Z-axis: 650 mm C-axis: 0.001° All axes have linear drives Fpodpfox Dlgnex Afuon Accessories: -Coolant system -Chip conveyor The machine has been regularly maintained. It is still very accurate! More pictures will follow. Video available upon request.

Condition: used, - 3-layer blown film line on rotary platform - Product-specific modifications and adjustments are possible (subject to charge) Fodpfxoxq Hcds Afuepn - Spare screw, spare cylinder and various spare parts are additionally available for this line Freight terms: ex location Delivery time: by arrangement Payment terms: 100% in advance before machine takeover, strictly net

Condition: ready for operation (used), Year of construction: 2005, Make: DMG Fedjz I Rfhepfx Afujpn Type of machine: DMC 60 T Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Machine's weight: ca. 9 t Tool holder: SK 40 x-travel: 780 mm y-travel: 560 mm z-travel: 560 mm Speed range: 12.000 1/min Number of tools in the magazine: 120 Pl. Internal coolant supply: 40 bar. 3D Measuring probe: Heidenhain TS641 : 360 ° : x

Condition: used, Year of construction: 2019, operating hours: 585 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, tank capacity: 60 l, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 dates back to 2019 and has 585 operating hours. It has been completely disassembled by us. During this process, each component was checked for its functionality and cleaned. The B 60 W Bp scrubber-dryer with chemical dispensing system and drive system is ideally suited for maintenance cleaning in retail stores, hardware stores, shopping centers, commercial facilities, industrial plants, and airports. Fsdjz Ngaljpfx Afuepn It features a 60-liter fresh/dirty water tank and has a cleaning performance of 1,000 m² to 2,500 m². Our machine is equipped with a roller brush with a working width of 65 cm. This makes it particularly suitable for removing coarse dirt particles.

Condition: used, Year of construction: 1980, operating hours: 4,035 h, gearing type: mechanical, color: red, Transmission: 4 gears, Manual gearbox Mileage: 4.041 km Suspension: leaf suspension Axle 1: Tyre size: 18R19,5 Axle 2: Tyre size: 280/80R18; Steering Drive: Wheel Number of cylinders: 4 GVW: 5.000 kg Wheelbase: 220 cm = Additional options and accessories = - PTO Fedpfxjz Hbr Ae Afuspn