Used Hebrock Hff 08 for sale (4,526)

Condition: ready for operation (used), Year of construction: 2004, Brand: Hebrock Model: AKV 83 F Year of manufacture: 2004 Machine no: 10759 Bwedpfsu Racxex Ahmju Technical data: Workpiece thickness: from 10 - 50 mm Feed speed: 3 - 4 m/min Electrical connection: 220/380 Volt, 50 Hz. Power: 3 KW Dimensions: 1750 x 800 x 1250 mm (complete) Weight: approx. 95 kg. Heating: 3 KW, with stepless electronic temperature control, 0 - 650 degrees C Motor: 3.5 kW Stock no: 2002311BXA

Condition: used, Year of construction: 1994, for pre-coated edges including a lot of edge material with outriggers on both sides Bwjdpfevwfzvjx Ahmsu end cap station 3-roller feed used, good condition Make Hebrock Type AKV-83 Year of construction 1994 Edge band thickness 1.0 mm Workpiece height max. 50 mm Workpiece width min. 50 mm Workpiece length min. 170 mm Space requirement approx. 1700 mm x 690 mm x 500 mm Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave Bwedpoxrb Tgsfx Ahmeu External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Bsdpfx Aoywmzijhmowu Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: M04I/9012, Offer Number: M04I/9012 Machinetype: pointing machine Info: vibratory feeder Make: HILGELAND Type: SKM 08 Constr. year: 2011 diameter range: 2-8 mm shaft length under head: 150 mm output pieces/min: 70-300 Location: Germany Bsdpewzkn Iefx Ahmewu

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2016, total width: 2,510 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,880 mm, color: blue, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - EBS (Electronic Braking System) = Further information = Axle configuration Tyre size: 385/65R22.5 Axle make: BPW Brakes: Disc brakes Bwjdpfx Ahsz Hkllomeu Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,750 kg Payload: 33,250 kg Gross vehicle weight (GVW): 39,000 kg Identification Registration number: OP-52-HT

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Bwodozf Admepfx Ahmeu Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Bwodpszumnzjfx Ahmou Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: excellent (used), Furniture Carcasse (Case) through-feed Press Clamp "LIGMATECH" Mod. CabTeq T200 (MDE 120 / 25 / 08) - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) Bodez D A Iyjpfx Ahmowu - Adjustable feeding speed m/min 12-40 - HOMAG powerTouch - Total installed power Kw 10 - Total length of the machine mm 6350 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2500 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 220 /1320 Motorized transport carpet (length mm 3000) Motorized transport carpet (length mm 3000)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand large-format scanner, the “WideTek-36-600 Scanner” Item for sale: 1 x WideTek-36-600 Scanner Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. Bwsdpfx Ahsz A Axcjmsu For further information, you are of course welcome to contact us directly.

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Bwodpeg Tu Rkjfx Ahmeu Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: used, mileage: 264,000 km, power: 110 kW (149.56 HP), first registration: 10/2009, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 6,360 mm, total width: 2,240 mm, total height: 2,980 mm, Year of construction: 2009, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, 1st owner. Well-maintained vehicle. Inspection and TÜV (German vehicle inspection) recently performed. All-wheel-drive ambulance Mercedes Sprinter 515 CDI with WAS box body. Euro 4 engine, 4-cylinder, 2148 ccm / Green environmental badge. 6-speed manual transmission. 148 km/h. All-wheel drive can be engaged via a button. Wheelbase: 3665 mm. CD radio. GARMIN navigation. Automatic climate control (Tempmatik). Airbags for driver and front passenger. Auxiliary heater Eberspächer Hydronic D10W (diesel heater). ABS and ASR. ESP. Rearview camera with monitor. Exterior mirrors and power windows. Central locking via remote key. 2 original Mercedes remote keys plus 2 manual box body keys included. Previously registered as "Other motor vehicle, ambulance, closed ambulance". Last registered with green license plates. With emergency warning system. Overall vehicle dimensions: Length 6.36 m. Width 2.24 m. Height 2.98 m. Unladen weight according to vehicle documents: 3785 kg. Permissible total weight: 4600 kg. Electrically extending step at the sliding door on the right side of the box body. 5 registered seats, including 3 emergency seats for accompanying personnel in the box body, plus 1 cot. DUNLOP winter tires from 2015 with snowflake symbol, all in good condition, twin tires at the rear. TÜV valid until 08/04/2026, valid until August 2027. Last inspection at 263,224 km, with oil changes for engine, transmission, front axle, and rear axle. Bwsdszztm Rjpfx Ahmou This Sprinter initially operated in regular ambulance service and then only occasionally with the "Ambulance Support Group" in recent years. Despite the limited use, it was always maintained and parked in a garage to ensure full operational readiness until the last day of use. The Sprinter was deregistered by the first owner on 09/07/2026, and after that, it was driven to us without any problems over 700 kilometers on the highway. No error messages or other malfunctions, the car works perfectly. Interior clean. Appearance is quite appealing for its age. Air conditioning is said to be weak according to the driver. 1 boot of the lower right suspension arm is damaged (status GM "minor defect" during TÜV inspection. Otherwise, the inspection report is without defects). This offer is only valid for commercial businesses and freelancers of all kinds and from all industries, as well as for authorities and emergency services of all kinds. Direct sale to private end users is unfortunately not possible. Subject to prior sale and errors. The selling price is the final price/amount gross = net. The differential tax rate according to §25a UStG applies. This means that the VAT cannot be deducted separately and is not due additionally.

Condition: used, Year of construction: 2002, operating hours: 3,680 h, Internal vehicle number: G400103 Bwsdoy Ekncepfx Ahmeu Available immediately at our site in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HAMM tandem roller with vibration and oscillation, TYPE DV 08V Super complete in standard configuration with CE marking and declaration of conformity, including: - ROPS-integrated driver's cab - Cab heater - Sound insulation - Edge compaction & cutting system - Cutting wheel - Pressing roller, 45°, 5 cm surface - Track indicator for KAG (bulk goods handling) - Hydraulic connection - Asphalt temperature indicator - TÜV (Technical Inspection Association) approval - On-board tools and documentation - Seat belt Special paint: RAL 8017 / 1001 - Fuel tank, 155 liters Total compaction force: 288 / 323 kN Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, compressed air connection: 8 bar, table width: 2,000 mm, cutting current: 260 A, positioning accuracy: 0.01 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, double-sided, For sale: used AJAN CNC plasma cutting machine with water table. The table is filled with water to a set level and cutting takes place just above the water surface. The water captures fumes and dust and cools the workpiece, so no separate filtration system is needed. The machine is compact and takes up little floor space. The gantry has dual-side servo drive. AJANCAM nesting software is included free of charge. ⭐️ Manufacturer AJAN Elektronik (Turkey) ⭐️ 1st Commissioned December 2015 ⭐️ Table size 2000 × 6000 mm ⭐️ Plasma power source AJAN HP 260A ⭐️ CNC control AJAN own controller ⭐️ Nesting software AJANCAM nesting software – included free of charge + free updates in future. ⭐️ Cutting currents 30 A, 80 A, 130 A, 260 A ⭐️ Max. cutting thickness quality cut up to 30 mm ⭐️ Input voltage: 380 V ⭐️ Phases: 3 ⭐️ Frequency: 50 Hz ⭐️ Torch height control automatic ⭐️ Gas control automatic ⭐️ Condition in working order ⭐️ Price 16 500 EUR + VAT ⭐️ Transport and installation 5 500 EUR + VAT (in Baltics, Finland) Bsdpfx Asy Annbehmewu ⭐️ Availability immediately ⭐️ Photos, layout, attached to this post ⭐️ video on request Need more information or a formal quote? please send a e-mail or give us a call.

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, including adhesive dispensing device, HF milling station with pneumatic milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Bodpfeh Hl Aysx Ahmswu Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: used, Year of construction: 2003, MANUFACTURER: ALUP MODEL: SCK 101-08 Serial number: 217586 Year: 2003 Power (kW): 75 Bedpsyi D Hrefx Ahmswu Capacity (m³/min): 12.9 Pressure (bar): 8

Condition: used, functionality: unexamined, Ferwood Code: RU0012082 - Manufacturer Code: V15-30-00-08 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8KG - Dimensions: 70X46X34 cm - If interested, we offer a refurbishment service; please contact us. Bjdpfx Ajyz U Sdohmowu

Condition: used, axle configuration: 3 axles, first registration: 07/2016, color: other, Year of construction: 2016, Empty weight: 5.325 kg Axle 1: left 12 mm right 12 mm Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 12 mm We have the possibility to stack trailers! Bwsdpfxsu Au Tce Ahmou

Condition: ready for operation (used), Year of construction: 1989, • Gear grinding machine NILES ZSTZ 08 CNC • CNC: Fanuc 180i-M • Minimum/maximum module: 2/14 • Maximum grinding diameter: 800 mm • Maximum grinding diameter without tailstock: 1000 mm • Minimum grinding diameter: 50 mm • Grinding wheel speed: 2450 rpm Bwsdpfjzk Hfrex Ahmju • Maximum helix angle: 45° • Rotary table diameter: 630 mm A set of change gears is available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 750 h, STILL R08-20 electric transport vehicle with cabin – 2000 kg – only 750 hours Specifications: Load capacity: 2000 kg Battery voltage: 80 V Drive power: 5 kW Bedpjy Dr Hwofx Ahmswu Working hours: 750 h Year: 2011 Manufacturer: STILL (Germany) Electric industrial transport vehicle with enclosed cabin for operator. Equipped with a large aluminum loading platform. Suitable for warehouses, factories, airports, logistics centers and industrial facilities. Machine in good working condition, ready to use. Very low working hours. It might need battery service - sold as is, where is, or after maintenance (to be agreed) Available for inspection. Contact for more information.

Condition: used, functionality: unexamined, Year of construction: 2012, Rotating Device Stabau S 08 - DE 80 - S - G Year of manufacture: 2012 Was mounted on an 8-ton forklift. Bwsdjy Av Ntepfx Ahmju

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Bodpfxew Aguyo Ahmowu

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Bwjdei Am U Dopfx Ahmju Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: used, functionality: fully functional, machine/vehicle number: 510127B00195, Year of construction: 2011, fuel type: electric, gearing type: automatic, overall weight: 4,100 kg, empty load weight: 3,200 kg, total height: 2,600 mm, total length: 3,990 mm, total width: 1,300 mm, color: blue, Equipment: cabin, lighting, trailer coupling, Technical specifications at a glance: Manufacturer/Model: STILL R 08-20 Year of manufacture: 2011 (First registration/delivery: June 2012) Drive: Electric Payload (platform): up to 2,000 kg Towing capacity: 2,000 kg Speed: 20 km/h (without load), 15 km/h (with load) Dimensions (L x W x H): 3,990 mm x 1,300 mm x 2,600 mm Unladen weight: 3,200 kg Highlights & Features: Driver's cabin with standard doors Bsdpfxsza Txro Ahmjwu Comfortable driver's seat (textile upholstery) with lumbar support Rear trailer hitch (Rockinger 244A, 12 Volt / 7-pole) Box body with tarpaulin Front impact protection Complete lighting system in accordance with StVZO (German Road Vehicle Act) Air tires for high driving comfort Paint finish in RAL 5011 (steel blue)

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Intermercato TG 22 PRO-SR5 grapple saw / 5-finger grapple / incl. MS08 adapter plate / in stock & immediately available / year of manufacture: 2023 Price: €9,890.00 net / €11,769.10 gross - Weight (kg): 156 - Cross-sectional area (m²): 0.20 - max. working pressure (bar): 200 - Oil flow (l/min): 50 - Closing force (kN): 11.6 - Excavator class: 4-10 t - Grapple opening width (mm): 1,225 - max. capacity (kg): 3,000 Equipment: Bwjdoznrxxopfx Ahmeu - incl. MS08 adapter plate - incl. hoses (see photos) We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various grapples that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Westtech sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Intermercato range for you! !!Errors and prior sale excepted!! Internal ID: 3068 = Further information = New: No Unladen weight: 156 kg Part suitable for: Intended use forestry Please contact Marius Herden for further information.