Used Hess Rh 1500 for sale (6,907)

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, Drill, HESS door handle. Single-unit with pneumatic clamps. For PVC and ALU windows. Cgodpfxsv H E Ale Ad Ajt

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Cgodet Tqy Ejpfx Ad Ast Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 1990, Used machine Cgedpfxjyq T Hwe Ad Aot Year of manufacture: 1990 Features and technical data: - Electro-hydraulic - Automatic final pressure release and follow-up switching for constant pressure maintenance - Central pressure beam with quick-adjustment cylinder, pressure cylinder, and abutment - Additional horizontal pressure cylinder - Press area approx. 3000 x 2250 mm - External dimensions 4000 x 2750 x 850 mm - Equipped with 3 horizontal pressure cylinders - Equipped with 2 vertical pressure cylinders - Cylinder stroke 150 mm - Pressure force per cylinder: 2000 kp at 100 bar - Working pump pressure capacity: 100 bar - Support and pressure plate depth: 100 mm - Electric connection: 1.5 kW Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1988, - Grinding width: 190 mm - Grinding height: 4 - 150 mm Cgsdpfoymnz Uox Ad Ajt - 2 grinding units - Belt speed: 25 m/s - Feed speed: 5 - 25 m/min - Sanding belts: 1850 x 200 mm - Electrical connection: 400 V, 3/N, 50 Hz - Ex stock

Condition: used, Year of construction: 2017, operating hours: 1,907 h, mileage: 1,907 km, power: 15 kW (20.39 HP), first registration: 10/2017, overall weight: 1,900 kg, fuel type: gas, color: red, axle configuration: 4x2, maximum load weight: 800 kg, empty load weight: 1,100 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, Equipment: cabin, * German vehicle * 1st hand * Ideal for operation in large halls, logistics and parking garages, as NO exhaust fumes due to gas drive * See photos for condition * Original only 1907 operating hours * Hako Sweepmaster 1500 RH ride-on vacuum sweeper * Working width with 1 side brush 127cm * Area performance theoretically with 1 side brush, main sweeping roller 12.700 m2/H * Working speed 10 Km/h * GAS drive * Central brush rollers * Long, uninterrupted work thanks to filter systems with long service life and large containers * Simple, electronically supported 1-button operation * Maximum machine availability thanks to robust chassis and brush protection against damage * Easy maintenance: The operator platform can be quickly and easily folded up or forward for servicing. Codpfxjvhqimj Ad Aogt * Clean exhaust air and long operating times: Cassette filter system with large filter surface and patented R²S filter cleaning technology. * Simple wear compensation: Adjustment of the main sweeping roller with ABBA system (automatic container-broom adjustment) for a perfect sweeping pattern over the entire service life of the roller. * 250 liter dirt container * Discharge flap at the rear * High discharge for the hopper * Unladen weight: 1,100 kg * Tare weight: 1,900 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, empty load weight: 450 kg, maximum load weight: 1,050 kg, overall weight: 1,500 kg, loading space length: 3,050 mm, loading space width: 1,600 mm, tire size: 195/50R13C, Extremely stable single-axle flatbed high loader from trailer manufacturer HAPERT model AZURE H-1 1500kg 305x160 with 13" tires. Thanks to its fold-down drop sides, a flatbed can be used very universally. Pallets can be loaded very easily from the side or from the rear. All flaps and corner stanchions can be removed, so the high loader quickly becomes a pure platform. All Hapert overloaders have a wide range of standard equipment such as sturdy aluminium side panels, eccentric locks, lashing eyes, net hooks on hinged lower sections, automatic support wheel, extremely stable welded and hot-dip galvanized steel frame and reinforced and bolted V-drawbar. Technical data can be found below. Cgjdpfx Ajq Nfxhjd Aet We also offer optional trailer accessories for Hapert car trailers such as 40cm drop sides, lattice extension, drop side extension, total weight up to 1800kg, ramps, rear support set, 100km/h approval, tool box, lashing straps and trailer lock.

Condition: used, Year of construction: 2017, working width max. 240 mm Sanding height max. 140 mm weight ca. 2200 kg Csdpfoxwtwuox Ad Aegt

Condition: reconditioned (used), Overhauled Dorin CD1500M/OP semi-hermetic reciprocating compressor for R744 (CO2) with AC&R oil level system. The compressor provides a displacement of 11.7 m³/h at 50 Hz. Brand: Dorin Model: CD1500M/OP (Overhauled) Refrigerant: CO2 Refrigerant type: R744 Cgodpfxsycwvgs Ad Aet kW at 0ºC/+40ºC: 58.4* kW at -5ºC/+40ºC: 50.2* kW at -10ºC/+40ºC: 42.5* kW at -20ºC/+40ºC: 29.5* kW at -30ºC/+40ºC: 19.5* kW at -40ºC/+40ºC: 12.9* Oil level system: AC&R Oil sight glass Displacement: 11.7 m³/h at 50 Hz Weight: 164 kg Dimensions: 670x470x390 mm (LxWxH)

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation no. A3002551 piece eccentric pusher with column andclamping cross no. A250055 Cedjvwfr Iepfx Ad Asgt

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Codpfxjvwfw Do Ad Aegt

Condition: used, Year of construction: 1992, second handMake HessType SO-1992-811Year of construction 1992Track length approx. 3200 mmBand width approx. 250 mmMotor 0.25 kWRequired space approx. 3250 mm x 800 mm x 1600 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaulwithout guarantee and warranty Codpfx Aovwf H Sjd Aegt

Condition: new, with quick stroke system- NEW -drilling width 240 mmdrilling depth 180 mmdrilling stroke 160 mm2-step motor 1400/2800 rpm instead of 2,2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricweight 246 kgitem no. 300015including accessories:1 piece 2-step motor 1400/2800 rpminstead of 2,2 kW no. A2500701 piece plug-in fence 90° no. A3501281 piece lling grid system with4 rows of holes 16,20,22,25 mmBowden cable operation No. A3002551 piece 4-wheeled trolley with 2 swivel castorsand 2 brakes on own frameNo. A3504151 piece eccentric pusher with column andclamping cross No. A250055 Codpovwf H Ejfx Ad Aogt

Condition: new, withquick stroke system, rotatable drill head,operating instructionsdrilling width 240 mmdrilling depth 180 mmdrilling stroke 140 mmmotor power 2.2 kWmotor speed 2800 rpmdrill chuck holder 20 mmtable size 600 mm x 320 mmpusher system 1 eccentricmotor rotation angle 65° right/leftweight 268 kgarticle no.: 320010A 2500702-speed motor, 1400/2800 rpminstead of 2.2 kw, (LLB/BS/BSK)A 250055Eccentric presser with column and clamping crossfor LLB 200/300/320A 3504154-wheel chassis for LLB 300/320/400with 2 swivel castors and 2 brakes onown wheels 2 brakes onown frameA 25012890° plug-in stop for LLB 200A lling grid system SH LLB 300 D/320 Dwith 4 rows of holes 16, 20, 22, 25 mm,Bowden cable operation Cjdpsvwfrzofx Ad Aegt

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Cjdpfxoxuv N Uj Ad Asgt Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: good (used), Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm Codpfob A Hkysx Ad Aegt

Condition: used, power: 1 kW (1.36 HP), Year of construction: 2025, operating hours: 1 h, Empty weight: 798 kg Csdox R T Hxjpfx Ad Aogt Please contact Emal Jaweed for more information

Condition: excellent (used), 2 heaters 2x1400V Cjdpfx Adetrf Tkj Aegt In very good condition .

Condition: ready for operation (used), Siemens 6SE6440-2AD27-5CA1 MICOMASTER 440 SN:XAS415-003084, professionally fully overhauled and tested, with 24 months warranty, 100% functional. Scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire for price separately! Codpfx Adsx Dxgbs Aogt

Condition: ready for operation (used), Mattke MTR5000-170/25 servo controller, SN:4150038299, the servo controller has been overhauled by a specialist company, used, in good condition, 100% functional, scope of delivery as per photos Cgedpfx Asi Eb A Ued Aet

Condition: ready for operation (used), Siemens 1HU3104-0AH01 - Z servomotor, SN: E7L81515001010, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please enquire for price separately! ATTENTION: Please enquire separately for packing and shipping costs! Cgedpfxsx Dvnvs Ad Aet

Condition: like new (used), functionality: fully functional, total width: 2,600 mm, total height: 1,250 mm, Motor power: 0.75 kW Cgjdpfx Adox Ez Uae Aet with a drill head for drilling corner bearings and olives automatic height sensing

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Codpex Ez Nkjfx Ad Aegt

Condition: ready for operation (used), Grinding and polishing machine of a shoemaker company . Manufacturer Hess SB- Automatenbau , Model 802 / 114 Cgjdpfxsvb Uqhj Ad Aet

Year of construction: 2024, condition: new, Punching knives eroded from solid steel Our punching knives are manufactured from selected steels and are available in a wide range of geometries and standards of all types such as ISO, DIN, JIS, ASTM, IEC. They are characterized by: - competent steel selection - material specific cutting geometry - optional equipment with various specimen ejectors and clamping spigots Cgjdpfx Adekkhkus Aet - individual production in different heights possible - also possible as multicutter - long tool life - excellent cutting finish - optimal cutting results - suitable for every type of press e.g. manual toggle presses, pneumatic and hydropneumatic presses

Condition: like new (used), Year of construction: 2018, machine/vehicle number: STHP 80KN, functionality: fully functional, pressing force: 8 t, table width: 300 mm, total length: 200 mm, total width: 510 mm, total height: 1,320 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr Cgsdpfxot Rhb Is Ad Ast with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.