Used High Speed 12-Spindle Fine Thread Drill for sale (61,215)

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Rsdpfewnn S Rox Ad Ajt Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Rsdpfx Ajxpfglsd Aet Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Rsdpfxjxpfhvs Ad Aot Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Rodpfxoxn A Spj Ad Ast Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PRJ062775, Machining capacity: Drilling capacity into solid steel 60/40 mm Drilling capacity into solid steel 20/50 mm Tapping capacity into solid steel 60/M 36 Tapping capacity into solid steel 20/M 42 WORKING AREA: Boom travel (Y-axis) 1050 mm Column stroke (W-axis) 410 mm Quill stroke (Z-axis) 200 mm Distance from spindle bottom edge to table top edge, drilling radius 80-690 mm Swivel angle (C-axis) 330 degrees Central clamping of boom and column MACHINE TABLE Working table surface 1800 x 600 mm With 4 T-slots according to DIN 650 in the X-direction (width/spacing) 18 h9/125 mm Machine table height 900 mm CONTROL / OPERATION CNC control S-Box III Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides. 215 x 160 mm, Cartesian or polar. Interpolation: 2 axes (X, Y) Technology database: Tool management. Tool suggestions based on machining type. Material-dependent cutting data suggestions. Tool management: Max. 500 tools. Machining cycles: Cycles for centering, drilling, thread cutting, reaming, countersinking, and boring. Chip breaking/removal: Possible with drilling cycle. Drilling patterns: Hole row, bolt circle matrix. Basic software: Programming in dialog. 38 zero points can be saved. Rotate and mirror. Teach-in for X, Y. Z. Test graphics: Graphic display of drilling patterns Data interfaces: V.24/RS 232-C USB: For reading and reading data with an industrial-grade 256 MB MAIN SPINDLE DRIVE: Frequency-controlled three-phase asynchronous motor Drive power (100% duty cycle) 5.5 kW Torque (100% duty cycle) 250 Nm Constant from 15-200 rpm Spindle speed range continuously variable 12-2800 rpm Steep taper spindle: Tool holder according to DIN 69871 SK40 with pull studs according to DIN 69872-19 AXIS DRIVES C-axis, Y-axis, Z-axis, W-axis max. 0.35/0.35/2.90/2.40 kW Rapid traverse speed continuously variable C-axis max. 4.5 rpm, Y-axis and Z-axis max. 7.5/5.0 m/min W-axis max. 3.0 m/min Feed speed continuously variable C-axis, Y-axis, Z-axis, W-axis 5-2000 m/min Feed force (Z-axis) max. 12,000 N LUBRICATION Centralized manual lubrication MACHINE ENCLOSURE Protective grille system arranged around the machine. with mesh grille External dimensions 6000 x 6000 ITTTI (w x h). Height of system element approx. 2000 mm 1 access (wing gate located at the front of the machine. Opening width approx. 2000 mm) Manual opening and closing. Safety door switch with magnetic locking. ELECTRIC, PNEUMATIC, HYDRAULIC DECORATOR POWER CONNECTION Mains connection 400/50 volts/Hz Control voltage 24 volts, power consumption 13 kVA, fuse 35 A Operating voltage: 3 x 400 volts AC/N/PE +5% -10%. N conductor load capacity. Frequency: 50 Hz. PAINT DD textured paint Machine upper section light gray RAL 7035, machine lower section RAL 5023 TRANSPORT DIMENSIONS Width 1900 mm Depth 2,565 mm Rjdpfx Adowmcato Ajt Height 2,788 mm MACHINE WEIGHT Machine as a transport unit with standard table approx. 2,950 kg OPTIONS: Base plate with circumferential coolant channel. Clamping area 1,000 x 1,400 mm. Height 100 mm with 4 T-slots Electronic probe Including SK 40 chuck Pick-up tool magazine Programmable tool change for rear workstation. The magazine arrangement with 5 tool positions including protective cover is attached to the right side of the machine. Coolant system version A integrated in the machine base for machines without a base plate, consisting of: Coolant tank with a capacity of 35 l. Coolant pump complete with fittings, flow rate approx. 40 rpm at 0.4 bar.

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Rjdpfx Ajvtpdged Ast Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Rjdpfjwz Ufwex Ad Ajt

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Redowz Ukyspfx Ad Aet Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: good (used), Bacciottini Pit Stop AF High Speed ​​Automatic Creaser Fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the option of adding material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Machine with an enlarged format up to 1000mm. Technical data: Redpfx Adeyrz Ule Ast Maximum sheet size: 500×1000 mm Min. sheet size: 100×150 mm Maximum speed (for A4 format): 10,500 sheets/h Material weight: 80-600 GSM Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 233 kg Dimensions: 170 x 85 x 120 cm

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Rsdpfx Adjxvy Hmo Ast

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 Rjdpfx Aodkx Aned Ast - right - left rotation - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm no. of strokes 60-300 Hub/min table surface area 730x750 mm Redpswz Rv Ejfx Ad Aet weight of the machine ca. 14 t

Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Jogging unit 3643 and Spiral Raceway element 3641 M.M. automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Rodpey Ib S Rjfx Ad Aot Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: used, 2016 Brother Speedio X1 R650. Brother Speedio S650X1 CNC Machining Centre – Available Immediately The Brother Speedio S650X1 CNC machining centre is a high-speed vertical machining centre designed for precision machining and high productivity. Built in 2018, this machine offers excellent reliability and fast cycle times, making it ideal for subcontract machining and production environments. Equipped with the Brother C00 control, a high-speed spindle and automatic tool changer, the machine delivers efficient and consistent machining performance. Machine Details Machine: Brother Speedio S650X1 CNC Machining Centre Year: 2018 Control: Brother C00 Control Spindle Speed: 16,000 rpm Tool Capacity: 22 Tools Table Size: 800 mm x 450 mm Availability: Immediate Equipment & Options Through spindle coolant Swarf conveyor Coolant system Automatic tool changer High-speed machining capability This machine is well suited for subcontract machining environments and precision component production. Redpfx Aoy E E Uked Ajt

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 991217, total height: 1,600 mm, total width: 2,300 mm, total length: 2,200 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 120 mm, feed length Z-axis: 40 mm, drilling depth: 40 mm, spindle speed (max.): 2,800 rpm, rotational speed (max.): 2,800 rpm, collet bore: 13 mm, power: 15 kW (20.39 HP), drilling capacity: 35 mm, number of spindles: 2, workpiece height (max.): 40 mm, We offer this used COMEC multi-spindle drilling machine FFR 2+2 1200 + CA, year of manufacture 1999. Brand: COMEC di Bergamasco L. & C. snc Model: FFR 2+2 1200 + CA Type: Milling/Drilling Machine Serial Number: 991217 Rodpfx Asy Idzhsd Aot Year of manufacture: 1999 Additional information: COMEC twin-column drilling machine for wood Machine dimensions: 2200 x 2300 x 1600 mm Power: 15 kW Voltage and frequency: 380V and 50Hz Spindle speed: 2800 RPM Chuck: from 0 to 13 mm Drill diameter: 35 mm Supply: electric and pneumatic Drilling capacity: - Length: 100 to 1500 mm - Width: 15 to 120 mm - Thickness: 15 to 40 mm If you have any questions or need more information, please don't hesitate to send us a message or call us.

Condition: used, mileage: 1 km, power: 187 kW (254.25 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 44.400 kg Please contact Emal Jaweed for more information Rjdsy Iadrjpfx Ad Aot

Condition: used, The COMEC MM05/3L is a multi-spindle oscillating drilling machine equipped with seven spindles, designed for automatic drilling of holes in materials of specific dimensions. The machine features an automatic feeder that streamlines the machining process by automatically feeding and clamping the material. The MM05/3L's technical specifications include: - 7 oscillating spindles, - adjustable oscillation, - pneumatic material clamps, - production capacity of several hundred pieces per hour. The machine features a robust construction, flexible work settings, and CE certification, ensuring safety and compliance with European standards. It is suitable for production applications requiring precise multi-point drilling on a variety of materials, typically found in the furniture and woodworking industries. Rjdpfx Aexrpcijd Aot The automatic material feeder, working in conjunction with the multi-spindle drilling unit, increases the efficiency and repeatability of production processes, minimizing operator involvement and improving work ergonomics.

Condition: used, Automatic drilling machine/multi-spindle drilling machine with units for front-mounting sleeves. - 2 horizontal units - 2 vertical units Rsdjxrmptopfx Ad Ast - 4 front-mounted units (two on each side)

Year of construction: 2026, operating hours: 7 h, condition: new, functionality: fully functional, Brand new wood stack New design New Program New control system Sew Motors for Length adjustment and Lift Servo Motor for Sweeper up to 120 Boards pr Min Rodpfx Adoy Hxm Ne Aot Wood Stack for boards from 600mm to 1200mm. With brick, zigzag and normal stacking. Sticks can be added as an optional. Technical info: Board length 600-1200mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 incl Pallet ( Max 1000 Kg)

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Redpfx Aey E I Rned Ast Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: good (used), Code: 0342 Brand: VITAP Model: ALFA 35 - CE Standard Semi-automatic multiple boring machine with 35 spindles for furniture, kitchens, bathroom furniture, custom-made furniture, panels - CE Standard Technical data N° 35 spindles with quick coupling Centre distance between each spindle mm 32 Centre distance between first and last spindle mm 1088 Max depth of hole mm 70 Board dimensions mm 1330 x 500 Spindle rotations per minute 2800 Motor power Hp 3 Turret with 6 different depth positions Side fence Horizontal/vertical 45 degree pneumatic tilting head Metric bar 3000 mm with stops Operating pressure 6- 8 atm Overall dimensions mm 1590 x 860 x 1250 h Rsdpfx Ajywm A Hod Ast Weight kg 454

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed Redpoyk Ip Tofx Ad Aet ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Redoy En I Hepfx Ad Aot Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Bruderer roll feed, BBV 202/120, left-hand side, suitable for installation on BSTA 25/250 or BSTA 50/500 presses Feed length 0-120 mm Roller width 120 mm Rjdpfx Adow S Hv Is Ast Strip inlet width max. 203 mm Strip thickness max. 6 mm Feed length adjustment motorized. Fully overhauled in 2025. Available for immediate delivery. Also in stock are other feeder models, such as BBV 190/85, BBV 195/85, BBV 205/120, BBV 320/200 etc. Please contact us for more information!

Condition: ready for operation (used), functionality: fully functional, Comec FMC 900+ AGG Drilling Machine Automatic loading from magazine Number of spindles: 3 Number of milling spindles: 1 Main motor power: 3 kW Milling motor: 0.5 kW Max workpiece length: 900 mm Rjdpfsy Htk Asx Ad Ast Max workpiece width: 100 mm Maximum drilling distance: 800 mm Application: for large series production of chairs, beds, cots, and components for other types of furniture