Used Hydr. Univ. Notching Machine for sale (68,902)

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm Hnsdpfx Aksxab Srorou blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: used, 5-way combination profile steel shear, PEDDINGHAUS Type 210 AD/13 Machine No. 529A059, Year of manufacture approx. 1970 Punching unit: Punching force 60 tons Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Hsdpfx Aoi Duh Ijkrjnu Ø 20 mm in 19 mm sheet metal Overhang 365 mm Round bar shear: Cutting capacity, round 42 mm Square 38 x 38 mm Flat bar shear: Cutting capacity at shear angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shear: Shearing capacity, angle iron at 90° 110 x 10 mm Shearing capacity, angle iron at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notching up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz - Center-finding device via hand lever and centering device - Mechanical stroke release via hand lever - Flat bar shear equipped with 2° blade - Mechanical clamp on the profile steel shear, round bar shear and on the flat bar shear Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg Good condition

Condition: used, Year of construction: 1989, plate thickness 3 (VA), 4 (ST 40) mm cutting angle adjustment 30 - 120 ° cutting length 200 mm throat 300 mm table height 900 mm Hedpfx Asyv Nz Ajkrjnu work stroke max. 40 mm no. of strokes max. 40 Hub/min total power requirement 4 kW weight of the machine ca. 2.000 kg dimensions of the machine ca. 1500x1300x1400 mm

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW Hsdpfx Asftd Uaskronu weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Model: 220 6 S Hodpfxjyu H T Ej Akrjnu Capacity: 220 x 220 x 6 mm

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° Hedpermkl Aofx Akronu - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: used, Year of construction: 1992, plate thickness 6,0 mm ST Hnjdou Dbv Tepfx Akreu plate thickness 4,0 mm VA table-size 780 x 1000 mm blade length 200 x 200 mm strokes per minute 60 min engine output 3 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1400 x 800 x 1300 mm Features: - Electro-hydraulic notching machine - 3x locking precision stop - Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels - Electric stroke adjustment via digital display - Replacement blade (used) - Machine light - Side cut material ejection - Freely movable foot switch - Operating instructions

Year of construction: 1996, condition: good (used), machine/vehicle number: 9182, Offer 23168 Technical data: - Notching possibilities + miters in 3 planes Hjdpfx Aomb U E Ajkrsnu - right-angled, one-sided + two-sided + three-sided oblique . - Can be used as a shift cut crosscut saw - Pneumatic profile clamping Machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3,5 x 40 mm positive - horizontal 500 x 3,5 x 40 mm negative - notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. positioning with digital display - Swiveling range saw blade horiz. with vert. saw blade Saw blade - 45° - 90° - 45° mot. positioning with digital displays - Notching height adjustment with digital displays - profile stop shoulder manually tiltable 30° - 90° - 45° - pneumatic coolant check device - air connection 6 bar - drive 400 V / 2 x 3 kW - space requirement approx. W 2400 x H 2000 / D 1400 mm - weight approx. 1200 kg

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) * Hnsdpfx Akou Icq Torsu

Condition: used, functionality: fully functional, Year of construction: 2004, sheet thickness steel (max.): 4 mm, cutting length (max.): 200 mm, Type HKA 200 x 4 Capacity 200x200x4mm Variable angle adjustment Hjdpfxjv Efu So Akrjnu Blades reground

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm Hodoy Tif Aopfx Akronu total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Year of construction: 1990, condition: ready for operation (used), A hydraulic Euromac notching machine is available. Notching capacity steel/stainless steel: 6mm/5mm, blade length: 220mm, working angle: 90°, angle adjustment: 30°-140°, stroke rate: approx. 50/min. Machine dimensions X/Y/Z: approx. 1100mm/950mm/1300mm, weight: approx. 800kg. An on-site inspection is possible. Hnedpezd Ei Aofx Akrou

Condition: used, Year of construction: 1983, plate thickness 4 mm blade length 220 mm pressure 0 t weight of the machine ca. 1,5 t dimensions of the machine ca. 1,6 x 1,7 x 1,6 m total power requirement 2,5 kW Hjdpfjynbcuox Akrenu Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert.

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment Hsdsxabpdepfx Akrjnu - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm Hodpfsxabx Ejx Akrenu total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: excellent (used), functionality: fully functional, Boschert LB 13 KE Hydraulic 2-station machine for notching and cutting. The LB 13 KE differs from the basic model by having a second work station. Station 1 Notching with a fixed angle of 90°, cutting length 225mm x 225mm, 6mm steel (St 40), 4mm stainless steel. Station 2 Cutting to a depth of 100 mm, 25 mm wide (adjustable width), 4 mm thick in steel (St 40), 3 mm thick in stainless steel. The LB 13 KE is in very good condition and is fully functional. Length: 1350 mm Width: 1100 mm Hodpfx Akoznlavjrenu Height: 1400 mm Table height: 900 mm Weight: 1100 kg

Condition: used, plate thickness 4,0 mm ST plate thickness 3,0 mm VA table-size 800 x 800 mm blade length 250 x 250 mm strokes per minute ca. 55 min engine output 4 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1300 x 1300 x 1300 mm Features: - Electro-hydraulic notching machine - 2x locking precision stops, with stop bars Hnjdpfx Akjvg R Rhorsu - Single/continuous stroke selectable - Front finger guard - Freely movable foot switch

Condition: used, Year of construction: 1990, plate thickness 8 mm pressure 60 t Hjdpfxsxgn Dno Akronu notching: width x thickness 310-310-8 mm mm weight of the machine ca. 3,5 t

Condition: good (used), Year of construction: 2025, functionality: fully functional, Sales from the location 97424 Schweinfurt Manufacturer: SPINNER Model: U5-630 Hnodpfxjz Iz Rhs Akrsu Type: CNC machining center Year of construction: 2025 Used, with signs of wear, in good condition Technical data according to the manufacturer: Axes: 5 X-axis: 630 mm Y-axis: 530 mm Z-axis: 465 mm Milling spindle: 20,000 rpm Tool interface: HSK63 Tool magazine: 32 tool stations 2-axis swivel-tilt table D=650 mm in precision design T Rotary table diameter 650 mm Table load: 500 kg Swivel range B=-90° (-50°)/+110° Direct measuring system in B and C axes Hydraulic brake for swivel axis B and rotary axis C Direct measuring systems in X/Y/Z axes HEIDENHAIN control system We will gladly provide further technical data and information upon request if you are interested in purchasing. The machining center is currently powered and can be inspected after scheduling an appointment. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: used, Year of construction: 1981, plate thickness 4 mm blade length 250 mm Hodop U Utfspfx Akrenu angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop

Condition: good (used), Year of construction: 2009, Technical data can be seen on the data plate! Hnsdpewqmrhjfx Akrju

Condition: used, Year of construction: 1999, plate thickness 3-4 mm pressure 0 t Cutting length 220 mm Hedpfsynbczox Akrsnu table height 900 mm quantity of oil 35 l Table dimensions 950 x 790 mm total power requirement 4 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,0 x 0,86 x 1,2 m Foot switch angle adjustment 30°-140° automatic cutting gap adjustment

Condition: used, Year of construction: 1989, Year 1989 Hedpfsliuihjx Akrenu angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available Hsdpjzil Uiofx Akrjnu (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 1985, plate thickness 4 mm cutting length 225 mm blade length 225 x 225 mm Hjdpfx Aozyyy Iokrsnu table surface area 710 x 500 mm total power requirement 3,5 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 0,8 x 1,1 m 90° Notching machine Large table Adjustable stops Footswitch Emergency stop switch Scrap collection bin