Used Hydraulic Double-Sided Press for sale (47,060)

Condition: used, Year of construction: 1996, machine/vehicle number: 14.194, Pressure total: 80 - 800 ton Hedpfx Asu Saaajntot Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Hedeuqdi Uspfx Antjt Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Year of construction: 1986, Pressure total: 500 ton Hodpfx Aneuqdqlotst Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton Standard configuration The press was completely overhauled mechanically, hydraulically and electrically in 2008.

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Hodjuqd Nujpfx Antot Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Hodpfx Anovmfzbstst Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, Year of construction: 1985, Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Hjdpfeyvkuksx Antot Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 2 t, stroke length: 100 mm, total length: 4,120 mm, total width: 2,300 mm, total height: 2,650 mm, overall weight: 2,000 kg, working width: 2,000 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, height adjustment type: mechanical, pressure plate depth: 120 mm, warranty duration: 12 months, working height: 180 mm, Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Hjdpewgybusfx Antjt Engineered for High-Performance Industrial Production This double frame press excels through: large-scale processing capacity, adaptability to various frame types and materials, efficient and reliable operation. It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: good (used), Year of construction: 1977, Druck 250 t Staenderweite 1120 mm Hub 250 mm Entfernung Tisch/Stoessel, gr. Hub oben, Verst. oben 500 mm Tischflaeche 1100 x 900 mm Tischhoehe ueber Flur 950 mm seitlicher Staenderdurchgang 700 mm Stoesselflaeche 1100 x 900 mm Geschwindigkeit ab mm/s Geschwindigkeit auf mm/s Arbeitsgeschwindigkeit mm/s Ölinhalt 730 l Antriebsleistung 56 kW Hjdpfx Anox Ug Detet Gewicht 25 t Raumbedarf (BxTxH) 2,3 x 1,55 x 3,96 m Zusatzinformationen u mit oelhydr. Antrieb, hydr. (§20) und elektr. Steuerung nach UVV, Lichtschranke (Sick), obere und untere Hubbegrenzung, druck- und wegabhaengig steuerbar, Schnittschlagdaempfung, Kurzhubsteuerung, neue Steuerung (Mitsubishi), Sicherheitssteuerung (PNOZ Multi), Bildschirmsteuerung mit Touch-Screen, Schaltschrank

Year of construction: 1993, condition: used, TYPE: DEA 400/2000 Year: n.d. MAXIMUM RAM CAPACITY: 400 tons SLIDE STROKE: 1,100 mm MAXIMUM SHUT HEIGHT: 1,600 mm Hodpfx Asihf R Uontst TABLE DIMENSIONS: 2,000 x 1,600 mm FAST STROKE: 650 mm/sec CUSHION CAPACITY: 160 tons CUSHION STROKE: 400 mm HEIGHT ABOVE GROUND: 5,800 mm DISTANCE BETWEEN UPRIGHTS: 3,400 mm LATERAL WINDOW: 1,600 mm

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-1200/2 Year: 1993 Condition: Used Hsdpfxex R U Ide Antot Stock number: 0375 Pressing force: 1200 t Number of pressing points: 2 Die table size: 3,700 x 2,700 mm Ram size: 3,700 x 2,700 mm Ram stroke: 1,000 mm Max. vertical clearance: 1,590 mm Die opening at BDC: 610 mm Lower blankholder stroke: 400 mm Movable bolster: Present at the front

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 900daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 103 Lt./min (REXROTH - Axialkolbenpumpe)motor: 22 kw - 1500d / minmessurements (LxWxH): 2000x3200x4300weight approx.: 10.000oil filling: 700 Capacity: 250 tons (at 245 BAR) Operation : Via key switch Manual / set-up mode using two hands without light sensor Automatic via two-hand operation at full speed with light sensor Hjdpegta Rcjfx Antjt Main cylinder: Ø 350 mm Auxiliary cylinder: 2 pcs. Ø 80 x 60 mm Motor: 22 kW. – 45 hp. Pump: 103 lt./min REXROTH - axial piston pump Speed: Forward 120mm Pressure 13-4mm return 170mm./sec. Clear width: 1100 mm Table top: 1000x1000 mm/ with T-slots Ram plate: 1000 x 1000 mm./ with T-slots & spring welds Installation height: 600 mm (max. distance between table & ram plate) Stroke length: 400mm max Table height: 900 mm floor to table top edge Hydraulics: Block & Valves ( REXROTH ) (Hydraulic Accessory on Top of Press) priming valve Hydraulic & mechanical ram protection Pressure setting via PLC (min. pressure 35 ton) Speed setting via PLC. Pressure hold valve for 600 sec. Air cooler (temperature control adjustable via screen) Automatic lubrication for guides (adjustable via screen) Side of the working area closed with sheet metal wall Guide rails for parallelism Auxiliary engine: 5.5 kW+ 2.2 kW Auxiliary pump: 22cc.+5.5cc Safety rails around the hydraulics and side ladder Oil tank: 800 liters Oil quantity: approx. 700 liters Control: SIEMENS S7 - 1200 main switch box Giftable control panel Soft starter for engine Safety PLC: Sick PLC screen 9'' Siemens Two hand operation (movable) Ruler measuring stick for setting the stroke length 450 mm. - NOVOTECHNOLOGY Light sensor for the front and back of the work area - SICK 900 + 150mm. SECOME & Ethernet connection for remote maintenance - Siemens Working space lighting 2 compartment 8 free inputs and outputs on the PLC Automatic print refill if lost Operating instructions in German hydraulic plans control plans

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Hodpfxompfwdo Antjt Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw Hjdetndu Uspfx Antet UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions Hsdpfxjcmat Ue Antst

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters Hodpfx Aneu Axfcjtjt -Customized Overall Gluing Height

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Hedpfx Aezt H T Ijntot 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Press force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Transport packages: 1 piece EQUIPMENT Movable press cylinder Documentation CE certificate Hodjzxcldepfx Antst CE marking

Condition: used, Colour: Green Empty weight: 8.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional Hsdezxhxiopfx Antet - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 250 - Table length [mm]: 1000 - Table width [mm]: 600 - Table bore diameter [mm]: 140 - Ram length [mm]: 300 - Ram width [mm]: 300 - Height adjustment [mm]: 250 - Column spacing length [mm]: 2000 - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Ram stroke 35 mm Table size 280 x 210 mm Hedpfxsd Swtaj Antet Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 1975, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Hjdezxqztspfx Antot Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Hedpfx Anszxqyvstjt Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: excellent (used), Year of construction: 1973, Description to follow! Hsdpfjzxh S Nox Antst

Condition: used, Year of construction: 2000, pressing force: 1,600 t, total length: 6,000 mm, total width: 3,000 mm, total height: 8,000 mm, overall weight: 200,000 kg, Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Hsdpfx Anszxkrrstjt Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces. Pressing force max.: 1,600 t Dimensions (LxWxH) approx.: 6000 x 3000 x 8000 mm Weight approx.: 200,000 kg Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Hedpox R U Epsfx Antst Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: ready for operation (used), Year of construction: 1992, Available immediately from our location: Hydraulic single-column press, Edelhoff Type HEP 45 Year of manufacture 1992 Machine complies with the latest UVV regulations Pressing force 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive power 7.5 kW Weight 6 tons 4 guide pins of the upper ram are broken. These need to be unscrewed and replaced. Apart from that, the machine is in perfect working order. Price: EUR 3,000.00 plus VAT, ex works. Hodozwuclepfx Antst