Used Index C200 Cnc Lathe for sale (12,499)

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Gusdpfxjz Rnrre Aqgjh Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly.

Condition: used, Year of construction: 2018, turning diameter over cross slide: 525 mm, turning length: 1,255 mm, turning diameter: 520 mm, travel distance X-axis: 305 mm, travel distance Z-axis: 1,305 mm, rotational speed (max.): 2,500 rpm, overall weight: 8,600 kg, DL-35M motorized turret, FANUC Series Oi-TF control Godpfxjz Sqwtj Aqgsuh Workholding fixtures and tools not included AVAILABLE: late January/early February 2027

Condition: good (used), Year of construction: 1989, CNC turning machine WEILER Primus 2 CNC, serial number 160, CNC Bosch. Gusdpoz R R E Njfx Aqgeh

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 500 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 500 mm, spindle motor power: 15,000 W, rotational speed (max.): 4,000 rpm, total height: 1,800 mm, total length: 4,000 mm, total width: 1,900 mm, quill travel distance: 210 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, spindle nose: 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 54 mm Max. workable diameter from chuck: 250 mm Max. workable length: 500 mm Max. rotating diameter: 520 mm MAIN SPINDLE: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 6’’ Spindle bore: 80 mm Chuck diameter: 250 mm Motor power: 11/15 kW (50%) TAILSTOCK: Rotation range: 40 – 4,000 rpm Spindle nose: ASA 5’’ Spindle bore: 52 mm Chuck diameter: 165 mm Motor power: 5.5/7.5 kW (50%) BI-DIRECTIONAL TURRET: Number of positions: 12 Rotation time: 0.6 sec POWERED TOOLS: Number of positions: 6 Rotation range: 50 – 3,000 rpm Motor power: 3.7 kW (50%) C-AXIS: Type: CS (direct drive) Minimum programmable value: 0.001° Max. rapid traverse: 80 rpm Gedpsz Ig Urefx Aqgjuh AXES: X-axis travel: 210 + 5 mm Z-axis travel: 500 + 10 mm B-axis travel: 510 + 5 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 20 m/min B-axis rapid traverse: 24 m/min COOLANT: Tank capacity: 200 Lt Pump flow rate: 100 Lt/min DIMENSIONS: Overall dimensions with chip conveyor: 4,000 x 1,900 x 1,800h mm Weight with chip conveyor: 5,000 kg Machine complete with: • Drilling kit with tailstock on B-axis for simultaneous drilling and turning • 9 bar pump • Chip removal paddle L 150 mm • Monitoring system • Spindle bore 71 mm • Simple collet chuck, Morse taper 42 • Chuck diameter 165 mm • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, We offer this used Okuma LB300 CNC lathe, manufactured in 2001. Manufacturer: Okuma Model: LB300 Year of manufacture: 2001 The condition is very good and meets the manufacturer's specifications. The machine is operational in our CNC turning shop and can be inspected at any time. All machines are under the manufacturer's service agreement. Last service in 2026. The following accessories will be included in the sale: Chip conveyor Gujdpfxjz Rv Rvo Aqgoh Extraction system Tool holder (available at an additional cost, negotiable) The machine is available for immediate delivery after consultation. If you have any questions or require further information, please send us a message or call us.

Condition: used, Year of construction: 1992, operating hours: 27,221 h, functionality: fully functional, machine/vehicle number: 474, turning diameter over cross slide: 240 mm, turning length: 800 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,005 mm, total length: 2,953 mm, total width: 1,990 mm, type of input current: three-phase, overall weight: 4,300 kg, Last maintenance performed by INDEX-Werke GmbH & Co.KG on September 29, 2025. Chuck diameter: 200 mm Main drive: 30 kW Speed range: 40-4000 rpm Spindle bore: 65 mm Turning diameter over cross slide: 240 mm Turning length: 800 mm Cross slide with turret Tool positions: 12 Slide travel, cross/longitudinal: 220/850 Powered tools: 6 Speed at the drive wheel: 4000 rpm Tailstock Arbor diameter / Arbor travel: 85 / 140 Mount according to DIN 228: MK5 Total power: 52 kW Gsdpfx Aqsz Ng I Asgsuh Machine weight: 4300 kg Dimensions (L/W/H): 2953/1990/2005 Technical data subject to change without notice. Errors and prior sale excepted.

Condition: good (used), Year of construction: 1987, CNC turning machine WEILER Primus 2 CNC, serial number 151, CNC control system by Bosch. Guedpfxoz R R Eij Aqgsh

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Gujdpfx Ajrtrlzeqgeh Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Machine come with equipement from pictures. Gujdpfxjvx Tike Aqgsh Parts shown by hand not come.

Condition: good (used), Year of construction: 2002, Control system OSP U 100L, Swing over bed 530 mm, Swing over cross slide 420 mm Max. turning diameter 340 mm Turning length 1000 mm Gusdpsz Hwf Eofx Aqgsh Travel X 260 mm Z 1020 mm C 0.001° Spindle speed (2 ranges) 38 – 3,800 rpm Spindle power 22/15 kW Spindle bore 80 mm Bar capacity 70 mm Number of tools in turret/driven 12/12, VDI 40 Driven tool speed 4,500 rpm, 5.5/3.3 kW, Chuck diameter 315 mm Machine dimensions 3310 x 1895 x 1925 mm, 6.000kg 3 pcs driven tool holders, 5 pcs fixed tool holders. Chip conveyor, Tailstock with hydraulic locking, Tool measuring equipment,

Condition: excellent (used), Year of construction: 2008, turning length: 3,000 mm, spindle bore: 155 mm, spindle motor power: 51,000 W, total height: 3,200 mm, total length: 9,500 mm, total width: 3,200 mm, turning diameter over bed slide: 1,420 mm, workpiece weight (max.): 5,000 kg, overall weight: 16,000 kg, Make: Krewema Type: HFDM 55 Control: SIEMENS 840D YOP: 2008 4 chuck 1600 mm 4 chuck   900 mm 3 chuck   630 mm ( bore 310) Sauter 8 position revolver Vdi 60 tool system Internal coolant tool holder Radial live tool holder Axial live tool holder Chip conveyor double  Guedpfxsz R Rdms Aqgoh Internal coolant tool holder Swing over bed Ø: 1420mm Swing over cross slide Ø:920mm Swing in the gap Ø: 2050mm DBC Turning Length: 3000/4000mm Gap length: 1000mm Spindle bore: 155mm Spindle power: 51kW Bed width: 750mm Tailstock spindle Ø: 160Ø Stroke pinole: 300mm Workpiece weight: 5000 Speeds / ranges: 1200Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 6000mm/min. Length: 9500mm Width: 3200mm Height: 3200mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TA 15 Year: 2015 Gjdsz Alqdepfx Aqgjuh CNC: Fanuc Series 32i-Model B

Condition: used, Year of construction: 2022, operating hours: 1,990 h, Doosan DN Solutions LEO 1600 Year 2022 Fanuc i Plus control system 6-inch (170mm) chuck Spindle bore 45mm Travels: X-175mm Z-330mm Gsdez R S T Ispfx Aqgouh Max turning diameter 320mm Max turning length 303mm 12-tool turret MT4 tailstock Included with the machine: Chip conveyor with tank and pump Very good condition PDF specification file available

Condition: used, Year of construction: 2023, control SIEMENS Sinumerik 828D turning diameter 360 mm turning length 520 mm spindle tunring speed 4.500 U/min number of tool places 12(24) Pos. weight approx. ca. 4.000 kg Condition: Used Technical features & accessories: - SARA UC1SD filtration system - SUN KOREA SL2000 chip conveyor Gedpfx Aqez Nqbmegouh Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: used, Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, CMZ lathe 2 axes (X, Z) Godpfx Aqsz Alp Tegjuh TL 15 model Year 2012 Fanuc Series 32i-Model B CNC Chip conveyor ✅ Hydraulic steady rest ✅

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,416 h, functionality: fully functional, turning diameter over cross slide: 950 mm, turning length: 4,000 mm, turning diameter: 950 mm, spindle bore: 254 mm, spindle speed (max.): 630 rpm, spindle speed (min.): 2 rpm, travel distance Z-axis: 4,000 mm, Hankook Protec 9NC Hollow Spindle Oil Country Lathe Model: Protec 9NC Control: Fanuc 21i-TB Year: 2010 Spindle Bore: 254mm Capacity: 950 x 4000mm Swing Over Cross Slide: 630mm Spindle Speeds: To 630 RPM (2 Ranges) Main Motor: 37 KW Machine With: Double 4 Jaw Manual Chucks (front or rear) Duplomatic 8 Station Turret Godpjzzq Sqjfx Aqgsuh 2 x Fixed Steadies

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Pinacho Tour lathe Guodpfxjz Ehx To Aqgsh Type SE 200 Year 2023 Fagor CNC Made in Spain Includes tooling Includes safety glasses Machine in like-new condition, with only 200 hours of use Exact Model: Pinacho SE 200-42 Ax1000/S1 Key Features: Only 200 hours of use Almost new condition

Condition: used, Year of construction: 2004, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 4 Axes: X, Z, C, B Type: TL 25 BTM Gujdpfxez Ih A Ds Aqgsh Year: 2004 CNC: GE Fanuc Series 18i-TB Video Available Inspection Possible Jaw Chucks: Included ✅ Tool Holder: Included ✅ Documentation: Included ✅ Chip Conveyor: Included ✅

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Guedey R A N Ajpfx Aqgeh Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Guedpfx Asxc In Soqgjh Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: used, Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Doosan Turning Center 2 Axes (X, Z) Godez St Tqopfx Aqgjuh Model: Puma GT2100B Year: 2018 CNC: Fanuc CE Certification Chip Conveyor: Operational ✅ Documentation: Available ✅ Chuck: Operational ✅

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Chuck:SAMCHULLY HS-12 (12 inch) Spindle Speed (Max.):3,000 RPM Gjdpfxjy Ea Hno Aqgeuh Spindle Nose:A2-8 Motor Power (Cont./Max):18.5 kW / 26 kW Max. Turning Ø x Turning Length:405 mm x 956 mm Tool Carrier (X/Z): Number of Tool Stations:12x BMT65 Max. Milling Ø:433 mm Travel (X/Z):245 mm / 1,040 mm Rapid Traverse (X/Z):24 m/min / 30 m/min Tailstock: Quill Ø:110 mm Quill Stroke:100 mm Equipment/Accessories: Additional Equipment:Tool touch probe (Tool Setter, swiveling) Collision Protection:Turret with Hirth coupling Year of Manufacture:2023 Weight:5,600 kg (according to configuration nameplate) Chip Management:Chip conveyor Electrical Connection:380 V / / 50/60 Hz / 42 kVA : :

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Godpezbam Eefx Aqgeuh Spindle: 11 kW Chip conveyor

Condition: refurbished (used), functionality: fully functional, Weiler Primus lathe with lead screw and drive spindle. Includes tailstock. The machine can be inspected while powered on prior to purchase. Shipping is possible for an additional charge. Gujdpfx Aoz Nh Epjqgeh VAT can be shown separately.

Condition: used, Year of construction: 2006, We are offering this used Okuma LU300-M CNC turning machine, manufactured in 2006. Manufacturer: Okuma Model: LU300-M Year of manufacture: 2006 Date of production: 11/2006 Serial number: 126842 Condition: used Machine category ID: 1182 Machine type ID: 190 Guedoz Rwfuspfx Aqgoh Machine type: CNC turning machine If you have any questions or require further information, please feel free to send us a message or call us.