Used Indramat Ac Servo Controller Servo Drive for sale (61,480)

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC Hnedpfswywi Aox Aamor O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Condition: used, Transistor pulse converter for three-phase feed drives with analog control, servo controller Hnodpfx Aaeh D Syvjmor SIEMENS, Type Simodrive 610, 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse converters were developed to power the three-phase servo motors 1FT5/1FS5. The dynamic characteristics of these motors are to be utilized optimally. By using appropriate components in the power unit, the pulse converters can be used for a wide variety of tasks. This flexibility is further increased by expansion modules for the power unit area. Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in the scope of supply)) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 % Number of feed axes: 4 Speed setpoint: +-10 Volt Auxiliary voltage: 24 Volt Relay contact for alarm/ready messages Dimensions WxHxD: 339 x 440 x 300 mm Weight: approx. 25 kg The servo controller is still operational and is installed in a Gildemeister GDM42. Further components from the Gildemeister can be found under the following stock numbers: 60343, 60347, 60348

Condition: new, Indramat TCM 2.1-02-7 A.C. Servo Capacitor-TCM, unused, in good condition, 100% functional. Hnedpsi Ebmmofx Aamer

Condition: ready for operation (used), Indramat RAC 2.3-150-380-A-00-W1 spindle drive, serial number as shown in the photo, used, fan missing, minor signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Hnedpsi Eblljfx Aamer

Condition: ready for operation (used), Indramat DDS02.1-W050-DS01-01 Digital AC Servo Controller, serial number 263500-25392, used, with normal signs of wear, 100% functional. Hnjdpfoi Ebf Usx Aamor

Condition: ready for operation (used), Indramat DDS 2.1-W050-DS01-01 Digital A.C.Servo Controller, SN 263500-16655, used, scratches on the front window, otherwise in good condition, 100% functional Hodpfjrly Sgjx Aamjnr

Condition: ready for operation (used), Indramat RAC 2.2-250-380-A00-W1 main spindle drive SN:232713-05451, used, normal signs of wear, 100% functional, delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Hodpfsx Dw H Hex Aamjnr

Condition: new, Indramat TDM 2.1-030-300-W1-220 AC servo controller, unused, in opened original packaging, 100% functional. Hnedsi Ebpdepfx Aamor

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. Hnjdoyl Av Dspfx Aamor DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Omron R88D-UP04H AC servo driver, serial number 406910-10-60, manufactured in March 1995, unused in original packaging, 100% functional. Hnsdpfxsi Ecbzj Aamor

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Hnedoxpqy Dopfx Aamsr Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: ready for operation (used), Indramat MAC 71A-0-ES-2-C/095-A-1 permanent magnet synchronous motor, serial number as shown in the photo, mounting hole spacing: 92 x 92 mm, drive shaft diameter: 19 mm, used, with normal signs of wear, 100% functional. Hodpoi D Iktsfx Aamsnr

Condition: ready for operation (used), Indramat MAC 090C-0-KD-2-C/110-B-0/S001 permanent magnet synchronous motor, serial number as shown in the photo, used, with significant signs of wear, 100% functional, scope of supply as shown in the photos. Hsdsi D Ih Aepfx Aamonr

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005, serial number: 68351, permanent magnet AC servo motor, mounting hole spacing: 152x152 mm, drive shaft diameter: 32 mm, used, shows normal signs of wear, 100% functional. Please request shipping costs separately! Hnjdpfxei D Ii De Aamer

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 Permanent magnet synchronous motor + Heidenhain Rod 1424.003-600 encoder. 250 040 12, serial number as shown in the photo, used, professionally and completely overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Hedpfx Aaoi D Ipqsmsnr

Condition: ready for operation (used), Indramat MAC 112D-0-FG-3-F/180-A-0/S011 servo motor, serial number: 71378, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. NOTE: Please request a separate quote for packaging and shipping costs! Hedji D Ikajpfx Aamsnr

Condition: ready for operation (used), Indramat MAC 071A-0-ES-2-C / 095-A-0, permanent magnet synchronous motor, serial number: 12254, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Hnsdpfx Aasvy N Sqjmor

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; Hnodomk S Slopfx Aamsr 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-PD-1-B/110-A-0/-I01250 servo motor, part no.: R911222784, serial no.: MAC090-6315, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Hjdpslrzlisfx Aamjnr

Condition: ready for operation (used), Indramat Rexroth MAC090B-0-JD-1-B/110-A servo motor, part no. 223455, serial no. MAC090-59923. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Hjdpfxslmta Ee Aamjnr

Condition: ready for operation (used), Indramat MAC 071B-0-TS-2-C/095-A-1/S001 permanent magnet synchronous motor, serial number as shown in the photo, used, with significant signs of wear, 100% functional, scope of delivery as per photos. Hsdpfx Aasi D Ihfemenr

Condition: ready for operation (used), Indramat MAC093B-0-JS-4-C/130-B-0/WI522LV / 256278 servomotor SN: MAC093-48736 / Tacho 3.0 V / 1000 rpm, used, in good condition, 100% functional, scope of delivery as shown in photos. Hjdpfexp T Hgjx Aamonr

Condition: ready for operation (used), Indramat MAC093A-0-LS-2-C/110-A-1// Permanent three-phase servo motor SN:7846, used, normal signs of use, 100% functional, scope of delivery as per photos Hnjdpfjvy N S Dex Aamsr

Condition: ready for operation (used), Indramat MAC090C-0-GD-1-B / 110-A Permanent Magnet Motor, serial number: MAC090-49089, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Hodpfx Aaolmtazjmenr

Condition: ready for operation (used), Indramat MAC 071B-0-PS-2-C/095-A-0 Permanent magnet three-phase servo motor SN:43146,used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdpfx Aeq N Ufdjamjnr