Used Ingramatic Rp1 for sale (77)

Condition: excellent (used), machine/vehicle number: 46131, Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Nwodpfx Agex I Nfrersl Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

Condition: used, axle configuration: 2 axles, first registration: 01/1987, suspension: steel, color: orange, mileage: 1,001 km, power: 206 kW (280.08 HP), fuel type: diesel, gearing type: mechanical, number of seats: 2, driver cabin: day cab, Equipment: additional headlights, all wheel drive, cabin, differential lock, Vehicle location: Bovenden, Body: Schörling sweeper type P 17B Operating hours sweeper approx. 2138! Nwsdpsvhh Exjfx Agrol The vehicle was never registered as it was only used on the airfield! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2007, condition: excellent (used), Roll pallet, heavy-duty roll pallet, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagons -Platform: 7100/2820/H800 mm Nwsdpfx Aey Aybtegrel -Load capacity: 12 t -Stake pockets: 2 pieces -Tires: Pneumatic tires, dual tires, 4 pieces 7.00-12, see photos -Transport dimensions: 7100/2820/H800 mm -Weight: 2760 kg

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition Nwodpfx Agsu Rwa Ierjl

Condition: used, Year of construction: 1999, machine/vehicle number: 4127, SECOND-HAND 4 ROLLERS GLUE SPREADER OSAMA S4RP-1300 - WORKING WIDTH CM. 130 WITH GLUE MIXER - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Working width 1300 mm - Automatic washer for rollers - N. 4 rollers - Volt. 380/50 Nwjdpfx Agewr Dc Tsrsl - S/N 4127 - Year 1999 - *m57

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Weight 2300 kg Nwedpsv Ivuujfx Agrjl Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 7,636 h, load capacity: 1,600 kg, lifting height: 3,215 mm, fuel type: electric, mast type: duplex, construction height: 2,080 mm, drive type: Elektro, Electric 3-wheel forklift Nwedpfx Ajxpz Aisgrel Load center: 500 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Rear tires type: Superelastic Battery voltage: 48V Sideshift, 3rd valve, 4th valve, front windshield, interior mirror, 3-wheel,

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Nedpfjz Ai Tvox Agrewl Please contact us to discuss your project or to set up a site visit.

Condition: refurbished (used), functionality: fully functional, overall weight: 3,200 kg, spindle diameter: 6,995 mm, type of input current: three-phase, roll diameter: 210 mm, spindle speed (max.): 20 rpm, spindle speed (min.): 60 rpm, total height: 1,900 mm, total length: 2,700 mm, total width: 1,600 mm, roll width: 175 mm, year of last overhaul: 2026, warranty duration: 12 months, Equipment: documentation/manual, Thread rolling machine ORT RP18 B 2-roll overhauled Nwodevxa Dbopfx Agrsl See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: used, ORT RP12 2-roll 12 ton Thread rolling machine Nwjdoyvk S Aopfx Agrjl The machine is in our warehouse, under power

Condition: excellent (used), Year of construction: 2017, Technical data: Product number: MRP 150 Year of manufacture: 2017 Motor power: 1.5 kW Capacity: 127 m3/h Max. vacuum: 0.1 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 150 kg Dimensions (H x L x W): 851 x 441 x 410 mm Nsdpfx Aoyxh Dzogrswl The pump achieves a vacuum down to 1 mbar, as shown in our recorded video. The pump is in perfect condition, barely used.

Condition: used, ORT RP18B overhauled Nedpfx Ajuua H Rsgrswl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2850x2050x2200 mm Weight 5150 kg Nsdpov A Hfyjfx Agrowl Total power requirement 78 kw

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2 Nwjdpot Apugsfx Agrel

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Nedet H Nhhepfx Agrewl Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Total power requirement 172 kw Nwjdpfxov A Hf Te Agrjl Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1350*2620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50hz/3phases- Air jet for each belt Optional- Automatic centering of conveyor belt YES- Press roller (rubber) YESWide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad)- Max. Working width 1300mm- Min. Working Length 350mm- Working Thickness 10-100mm- First unit: Contact roller Ø255- Second unit: Contact roller Ø255- Third unit: pad- Total: Motor 95kw- First Unit: Motor 37kw- Second Unit: Motor 30kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 0.55kw- First unit: Contact roller shore 80sh- Second unit: Contact roller shore 70sh- Third unit: Contact roller PAD- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1320*2000mm- Air Pressure 0.6Mpa- Overall Dimensions 2175×2976×2727mm- Net Weight 7370 kgs- Working Table Fixed- Working table height from the ground 1038mm- Voltage 400v/50hz/3phases- Air jet for each belt YES- Automatic centering of conveyor belt YES- Press shoes(steel) YES

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Nodsv A Hftspfx Agrswl Weight 12160 kg Total power requirement 135,6 kw

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,334 mm, total width: 4,390 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Nwedpfot H Nc Sex Agrel Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-200 mm Feeding speed 0-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Dust cleaning brush 0,37 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Nwedpfx Agedflqasrsl Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2400mm Weight 3300kg

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Nsdpfsd H Sc Eex Agrewl Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: excellent (used), Year of construction: 2005, SEMIRIMORCHIO TECNOKAR mod: T3SPRP115 CON CASSONE RIBALTABILE POSTERIORE Anno immatricolazione: 2005 Lunghezza cassone: mt 11.50 Larghezza cassone: mt. 2.40 Altezza cassone: mt. 2.10 Portata: 26.300 kg 3 assi Nsdpfx Aswq I Evsgrjwl CON REVISIONE VALIDA Con sospensioni pneumatiche

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, time-delay relay, motor contactor, auxiliary contactor -Manufacturer: Siemens, time relay -Type: 3RP1540-1AN31 Nwodpfszmticjx Agrel -Quantity: 1 piece available -Cardboard dimensions: 105/90/H30 mm -Weight: 0.1 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Nwodpfx Asykukqsgrsl Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch Nodpfsfv H Edjx Agrswl - 7 pcs. Roll sets

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Nsdpfolyqrcex Agrjwl Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order