Used Jet Jcdc-2 for sale (78,102)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t Pedpfx Ansxc Syreyerb equipped with Rockstroh Drain Jet 100-2 high-pressure flushing unit Internal Number: #558 Rockstroh Drain Jet 100-2 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF32 * Approx. 120 liters / minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work spotlights * LED interior lighting * LED roof-mounted warning lights * Various storage options * Watertight, non-slip plastic floor covering * Standard cleaning nozzle set Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, trailer socket 13-pin, battery disconnecting switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, suspension: stability level III, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), ambient lighting in passenger/cargo compartment, charging package dashboard (USB sockets and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, fog lights with cornering function, auxiliary drive 2B with reduction gear, parameterizable special module, crossmember for trailer coupling, crossmember with integrated step, sliding door cargo/passenger compartment left, mud flaps rear, seats in the driver's cab: driver's seat comfort, fuel level sensor for auxiliary heater, separating relay for battery additionally, front axle reinforced, preparation for transmission oil cooler, preparation for cargo compartment partition, winter package, sliding door assist left, sliding door assist right Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, automatic activation of driving lights, entry handle on rear pillar rear right, entry handle for sliding door on cargo compartment partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: driving information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: intelligent speed assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: box high

Condition: ready for operation (used), Year of construction: 2018, operating hours: 24,257 h, This STEINER Projet MJP 2500 Plus was manufactured in 2018. It's a plastic 3D printer designed for detailed and precise object creation. Ideal for prototypes and small-scale production, this machine represents a significant opportunity for those looking to enhance their 3D printing capabilities. Contact us for more information. Machine Benefits Prsdpfjx Nr Thex Anysb Qualitative Machine Benefits • Offer consist of printer + easyclean postprocessing kit + resin material Technical Machine Benefits • Total print time: 2132 hours 5 minutes • Time since last printer restart: 2905 hours 45 minutes • Total part material used: 74. 5 kg • Total support material used: 67. 2 kg • Layers printed: 295736 • Mco cleaner 2500: 0. 8 kg • Visijet m2 sup: 67. 2 kg • Visijet m2g-cl: 19. 2 kg • Visijet m2r-bk: 3. 2 kg • Visijet m2r-gry: 51. 3 kg Extra Information Machine still under powerAll post processing tools are included

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. Podsxzk U Sepfx Anyorb The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 322276, Year of construction: 2016, operating hours: 1,202 h, total length: 870 mm, total height: 1,200 mm, total width: 735 mm, type of input current: AC, overall weight: 250 kg, feed length X-axis: 255 mm, feed length Y-axis: 252 mm, feed length Z-axis: 200 mm, power: 1.5 kW (2.04 HP), We are offering for sale a Stratasys Objet Eden 260VS PolyJet 3D printer, originally purchased in 2017 and maintained in excellent working condition. The printer has been used in our architectural studio primarily for producing highly detailed architectural models of buildings designed by our office. Because of this specific use, the printer has very low operating hours and has always been handled with great care. The machine has only 1202 total printing hours, which is exceptionally low for this type of professional PolyJet system. Condition: - Fully functional and operational - Very low usage – only 1202 print hours - Maintained in excellent cosmetic and mechanical condition - Operated in a clean professional studio environment - Preventive maintenance performed regularly - Service and maintenance logs available upon request The printer was cleaned before and after every print using Stratasys-approved cleaning fluids and maintained according to the manufacturer’s recommendations. A couple of years ago the printer was properly cleaned and placed into long-term standby/storage mode following the appropriate procedure and has been stored safely since then. During its lifetime the only repair required was the replacement of the vacuum pump, which was carried out at the time and the printer has operated normally since. No other issues have occurred. The sale includes: - Stratasys Objet Eden 260VS PolyJet 3D Printer - Cleaning / washing station with pressure washer - Spare parts and accessories shown in the photos - Maintenance tools - Various filters and replacement components Prsdpfx Ajyt Rk Ejnyjb - The printer includes the original Stratasys HASP license dongle with material packages installed. Additional photos and log data can be shared upon request

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer Pedpfx Ajwt E Tvenyerb XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, suction capacity: 4,900 m³/h, intake manifold diameter: 250 mm, Dust extraction unit, wood chip extractor, pneumatic self-cleaning vacuum filter – Alko Mobil JET 250 The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and for extracting all types of dry dust in various technological processes. Fan power: 6.5 kW Capacity: 4900 m3/h Prjdozlcxqspfx Anyeb Vacuum: 2740 Pa Nozzle diameter: 250 mm Air return Stock number: 0904

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, resolution (max.): 360 dpi, paper width (min.): 290 mm, paper width (max.): 750 mm, paper height (min.): 360 mm, paper height (max.): 1,200 mm, TECHNICAL DETAILS Production Speed Production speed, UV spot coating: max. 3,123 ISO-B2 sheets/hour Production speed, Evo 75: max. 4,200 ISO-B2 sheets/hour Production speed, Evo 75: max. 2,291 ISO-B1 sheets/hour Production speed, hot foil embossing: max. 2,300 B2 sheets/hour Format and Printing Area Paper width: min. 290 mm Paper width: max. 750 mm Paper height: min. 360 mm Paper height: max. 1,200 mm Sheet format: min. 420 mm × 297 mm Sheet format: max. 750 mm × 1,200 mm Printable width: max. 540 mm or 730 mm Hot foil embossing area: max. 740 mm × 1,190 mm Resolution Resolution max.: 360 dpi Material Thicknesses and Basis Weights Material basis weight: min. 135 g/m² Material basis weight: max. 800 g/m² Material thickness before printing and lamination: min. 150 µm Material thickness before printing and lamination: max. 800 µm Material thickness for hot foil embossing: min. 150 µm Material thickness for hot foil embossing, standard version: max. 600 µm Material thickness for hot foil embossing, optional: max. 800 µm Prsdpfezrfh Ijx Anyob Foil Rolls Foil roll diameter: max. approx. 300 mm Foil roll length: 400–2,000 m Number of foil rolls that can be used simultaneously: max. 5 Foil roll width: min. 100 mm Standard core diameter: 1 inch MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,720 x 1,860 x 1,840 mm Weight: approx. 4,524 kg EQUIPMENT iFOIL-L module for hot foil finishing Evo-75 version for sheet formats up to 750 mm × 1,200 mm Holder for up to five foil rolls on one shaft Quick-change core for 1-inch foil rolls

Condition: like new (used), Year of construction: 2025, 110V.6 – Low Flow MERN Nozzle. Demo model. Used a few times. Suitable for Cold Jet blasting machines. Aero: 30 Aero: 40 Prodpfxsz Dkz Ue Anysb Aero: 75 Aero: 80 Aero: 100 Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3480x1100x2500 mm Weight 900 kg Pedpfx Anovz Hc Ajyjrb Total power requirement 5,5 kw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers a pressure range of 200 to 2800 bar and a flow rate of 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is made of hot-dip galvanized steel, which ensures long service life and corrosion resistance. For aesthetic appeal, the frame is primed and then painted. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet at all four corners, as well as forklift pockets and lifting eyes at all four corners. The machine features a galvanized roof plate with a side bracket for protecting and storing, for example, high-pressure hoses. Similar, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Psdpjhgbhnefx Anyjrb Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 lpm CD200-250 250 bar 250 lpm CD200-1000 1000 bar 63 lpm CD200-1380 1380 bar 42 lpm CD200-2500 2500 bar 25 lpm CD200-2800 2800 bar 23 lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optional without ADD blue) Drive engine power: 149.1 kW Drive engine speed: 1950 rpm Tank: 135 L for skid and 200 L for trailer Max. fuel consumption: 18-20 l/h Dimensions and dry weight SKID: 2170mm x 1350mm x 1810 mm (1785 kg) Dimensions and dry weight TRAILER: 3800mm x 1900mm x 2000 mm (2500 kg) Includes standard accessories.

Condition: used, Year of construction: 2013, operating hours: 14 h, functionality: limited functionality, machine/vehicle number: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, total width: 1,500 mm, total length: 3,000 mm, total height: 2,500 mm, pressure: 2,800 bar, operating pressure: 2,800 bar, fuel: diesel, overall weight: 3,000 kg, rotational speed (min.): 700 rpm, rotational speed (max.): 1,500 rpm, high-pressure hose length: 60,000 mm, year of last overhaul: 2025, Equipment: rotational speed infinitely variable, A Bundle of 5 ea. UHP waterblast machines, c/w a vast variety of spares and accessories, as follows: 1 x High-Pressure Water Jet Unit with Deutz-MWM V-8 Diesel Engine adjustable pressure 0–1400 bar and 0–2800 bar, dump system, with plunger changeout kit as follows: 1400 bar at 99 liters/minute, and 2800 bar at 46 liters/minute. The fluid head of this pump, including stuffing boxes and valves will be used for both 1400 bar and 2800 bar. Changing pressure range between 1400 and 2800 Bar is carried out by a simple and easy plunger changeout. Prjdpfxsxc E Trj Anyeb The unit was built in 2013 and kept operational as a backup machine, but was only used once for 14 hours at 2800 bar for a bundle heat exchanger cleaning project. This UHP machine is mounted on a zinc coated steel skid. The Deutz-MWM engine was purchased as a used engine, with approx. 3,000 operating hours , and was fitted in 2013 with a new Jetech UHDW high-pressure water jet pump. In addition, a large amount of accessories and spare parts are included, such as dump guns & foot valves, swivel joints, surface cleaners, rotary nozzles, high-pressure lances, nozzle inserts, seals, special tools, etc. An identical UHP waterblast unit is also available, but with a Scania V-8 engine and counting 850 operating hours at max. 1400 bar / 99 liters/minute. That unit is housed in a 20ft. container, with an 800 l Diesel Tank, a work bench /vise, Furthermore, there are 3 additional high-pressure water jet units with 110 kW power each, 2 of which have Volvo TD71A Diesel Motors, plunger changeout kits for 1400 and 2800 bar. A third unit is a Kamat K11000 with 2800 Bar OP. and a JCB Dieselmax engine. Also available is a hydraulic heat exchanger cleaning device with a rotating lance mounted on a scissor lift table, suitable for very large heat exchangers. All equipment comes from the closure of my company due to retirement. A buyer is sought for all machines and accessories as a complete package.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 3.324287, • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG Prsdpfowh Shcox Anyob • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original cleaning device for the ink system of the machine Including EXHAUST HOOD over the whole machine

Condition: used, mileage: 1,001 km, first registration: 01/1995, color: orange, driver cabin: other, gearing type: other, loading space volume: 12 m³, loading space length: 5,350 mm, loading space width: 2,300 mm, loading space height: 1,020 mm, Year of construction: 1995, Vehicle location: Bovenden, steel superstructure, jet drop sides, flap Body: Meiller body approx. 12.5cbm. Dismantling from vehicle DB ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Predpfevhgy Ijx Anysb - .

Condition: used, functionality: unexamined, Ferwood Code: RU0011435 - Manufacturer Code: 054.120.000 - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Pjdpfxov I A A Ss Anysrb

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 45 l/min. The standard version has solid rubber tires with a parking brake at the rear and swivel casters at the front. The “Slim version” has a narrower design and also narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal components with all-round side frames made of stainless steel. The standard model has dimensions of 1060 x 760 mm. The "Slim" version has a very compact size of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others, see datasheet and available upon request. General specifications: ----- Power of the drive motor: 15 kW (50Hz) / 15 kW (60Hz) Prjdpjhf Nbdefx Anyob Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Including standard accessories.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. Podei Hckrepfx Anysrb The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: like new (used), Year of construction: 2021, Various types of machinery for sale due to company liquidation. Check out my other listings too! . For sale: an automated, fully functional labeling and dating machine line. Small-character printer: Leibinger Jet2 neo, label dispenser, conveyor belt. Predey Ahilspfx Anysb

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, number of axes: 5, This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Additional equipment • Smart Abrasive Reserve Tank Included • Tank Capacity: 350 kg • Tank Pressure: 6 bar • Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Machine Benefits Technical Machine Benefits • Axes: 5-axis waterjet cutting machine • Cutting size: 4000 × 2000 × 250 mm • Type: cnc 5-axis, bridge type • Step accuracy: 0. 01 mm • Controller: esa 5-axis controller with ethernet, usb, and manual handwheel (x/y/z) • Cam program: semi-automatic nesting / automatic input-output system • Rapid traverse speed: 30000 mm/min Prsdpfxszbcmhe Anyeb Extra Information Condition: Very good technical condition, low number of working hours Movement Axis Motors: X-axis: 1 × 3.2 Nm servo motor Y-axis: 2 × 3.2 Nm servo motors Z-axis: 1 × 1.6 Nm servo motor with brake A-axis: 1 × 1 Nm servo motor with brake C-axis: 1 × 1 Nm servo motor with brake Transmission System: Helical hardened racks and pinions Linear Bearing: THK linear slides and rails Injection Unit High Pressure Pump: MJT-4000 Operating Pressure: 4000 bar constant (24h non-stop) Motor: 50 HP / 37 kW, 1500 rpm, 50/60 Hz High Pressure Flow Rate: 2.3–3 L/min Pressure Adjustment: 1000–4000 bar in 500 bar steps Orifice Diameters: 0.18 / 0.25 / 0.30 / 0.35 mm Hydraulic Pump: 71 cm³ (103 L), axial piston pump max. 200 bar Cooling Water Flow: 30 L/min Optimum Water Inflow: 4 bar Adjustable Pressure Water Pump: 10–16 bar

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, type of input current: AC, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, 6x HD2500 plus Very good condition Podpeyb R E Sofx Anysrb

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE125 series is an electrically powered high-pressure machine for pressures ranging from 200 to 2500 bar and a flow rate of 21 to 240 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. A lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz - bar - l/min. CE125-200-240 CE125-1500-35 CE125-2500-21 60 Hz and others, see data sheet and available upon request. General specifications: ----- Power of the drive motor: 90 kW (50 Hz) / 90 kW (60 Hz) Voltage: 400 V (50 Hz) - 440 V (60 Hz) Amperage: 81 A (50 Hz) - 108 A (60 Hz) Dimensions: 2150 mm x 1385 mm x 1750 mm Weight: 2000 kg Prjdpehga Rxjfx Anyob Including standard accessories.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, temperature: 60 °C, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages Psdpfxex Izwms Anyjrb - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of gasoline-powered high-pressure machines with a pressure of 170 to 500 bar and a flow rate of 16 to 46 l/min. The machine features pneumatic tires with a parking brake on the rear axle and steering rollers on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with continuous side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CP22-170 170 bar 46 lpm CP22-220 220 bar 36 lpm CP22-280 280 bar 27 lpm CP22-350 350 bar 23 lpm CP22-500 500 bar 16 lpm General specifications: ----- Pedpfxshga U Ae Anyjrb Drive motor: 2-cylinder, 4-stroke gasoline engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with manual throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high-pressure machine for a pressure range of 200 to 2500 bar and a flow rate of 25 to 350 l/min. The frame is made of hot-dip galvanized sheet metal components and side frames made of stainless steel. Four rubber feet ensure secure positioning. The lifting eye facilitates the transport of the machine. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others available upon request. Prjdpfehga S Dex Anyeb General specifications: ----- Power of the drive motor: 150 kW (50Hz) / 150 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Including standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The machines in the CD25 series are compact high-pressure cleaners, with pressures ranging from 170 to 500 bar and a flow rate of 17 to 42 l/min. The pump is driven by a 3-cylinder, water-cooled Kubota diesel engine. The robust frame is made of stainless steel for long-lasting durability and corrosion resistance. The powder coating ensures a very attractive appearance. The machine has very compact dimensions of 1200mm x 800mm, which corresponds to the same size as the well-known EURO pallet. The frame stands firmly on 4 large rubber feet. The high-pressure machine is also equipped with forklift pockets and a central lifting eye. This enables very easy transport. Similar to, but not a Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD25-170 170 bar 42 Lpm Psdpfxjhgbfhe Anysrb CD25-250 250 bar 32 Lpm CD25-350 350 bar 23 Lpm CD25-400 400 bar 21 Lpm CD25-500 500 bar 17 Lpm General specifications: ----- Max. pump speed: 1750 rpm Drive engine: Kubota Diesel 3 cyl., water-cooled Drive engine power: 18.6 kW Drive engine speed: 3000 rpm Tank: 28 L Max. fuel consumption: 5.7 L/h Noise level (7m): 80 dBa Dimensions and weight: 1200mm x 800mm x 1300 mm (350 kg) Includes standard accessories.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, product length (max.): 1,400 mm, product width (max.): 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of blast turbines: 4 Power per blast turbine: 22 kW Prjdpfx Anjyua D Reyjb Abrasive throughput per turbine: 7 kg/hour Shot flow rate: 450 kg/min Blast velocity: 80 m/s Maximum product dimension: 1,400 x 1,000 mm Cabin diameter: 2,200 mm MACHINE DETAILS Control system: Siemens EQUIPMENT Vibratory screen for abrasive media and discharged material Feed via external rail system CE marking