Used Jorns Twin-Matic 150 Sf-1150-Cnc 5000-10-Hs for sale (50,142)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Bjdpfjwcfgbsx Ahmsln Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications Bodsz Ernlspfx Ahmoln • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1998, Year 1998 Control Fanuc In our opinion, the machines are in very good used condition Bjdpjxc Nyvsfx Ahmjln Condition and can be viewed under power by appointment. Accesories: - Suction - Felsomat loading system An accessory package can be purchased additionally. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. Bljdpfju N At Rex Ahmon *

Condition: used, Year of construction: 2007, Machine No. 78, control system, manufacturer Boschert, tool quick-change system, manufacturer Trumpf, punching force: 3 x 280 kN, station 1 Trumpf system tool size 3 (105 mm) with spray device, station 2 Trumpf system tool size 3 (105 mm), freely indexable rotation, station 3 Trumpf system tool/Boschert Revotool size 3 (105 mm), including Revotool 8-position tool holder, travel distances X – 3,000 mm (adjustable up to 9,999 mm), Y – 1,580 mm, punching arm overhang 1,730 mm, sheet thickness max.: 6 mm (clamp opening), stroke height max.: 90 mm, programmable in increments upwards and downwards, punching slug extraction, ball bearings in the machine table Blodez Dv Tvspfx Ahmjn Table width left + right: 3,200 mm each, table depth: 2,810 mm, table height: 900 mm, overall width: 6,482 mm, overall depth: 4,600 mm, overall height: 2,110 mm; with workshop cart, manufacturer KS Tools, 7 drawers, contents: various hand tools.

Condition: good (used), Year of construction: 1998, Boschert TRI1000 x 2000 CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel distances: x – 2000 mm (adjustable up to 9999 mm) y – 1200 mm Punch arm reach: 1350 mm Bjdpfx Ahoizctcjmjln 3 punching heads, Trumpf tool system, size 1-3 (105mm) Head 1-3 Control system: Labod 32040 graphic control / workshop programmable Max. sheet thickness: 6 mm (clamp opening) / 10 mm Stroke height: 45 mm, infinitely adjustable upwards and downwards Table width left + right: 2100 mm each Table depth: 1800 mm Table height: 900 mm Overall width: 4082 mm Overall depth: 3500 mm Overall height: 2080 mm Drive power: 20 kVA Machine weight: 11,200 kg Hydraulic oil capacity: 80 l Color: Blue / Light Grey RAL7035 Machine year of manufacture: 1998 Good condition / refurbished, new safety light barriers New memory module with USB/SD card and LAN New HMI with display Lots of accessories 4 tool cabinets suitable to be placed under the machine table

Condition: used, Year of construction: 2009, machine/vehicle number: IntNr2314500, A proven, high-performance bar loader magazine, LNS, type Hydrobar 6.42 HS-4.6, is for sale. Technical data Manufacturer: LNS (Switzerland) Model: Hydrobar 6.42 HS-4.6 Year of manufacture: 2011 Working range (diameter): Ø 6 mm to Ø 42 mm Max. bar length: 3,000 mm Guiding principle: Hydrobaric (complete oil bath) Feed drive: Hydraulic Oil capacity: approx. 150 - 170 liters (HLP 46 or equivalent) Total length of the magazine: approx. 4,850 mm Weight (empty): approx. 650 kg The machine can be inspected in operation by prior appointment. Blsdsz E Ragspfx Ahmon Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Bedpfx Aozbhh Rshmsln Includes a set of tools.

Condition: used, DMG Gildemeister GMX 400 linear multi-tasking twin spindle CNC lathe with Siemens 840D control & pneumotec gantry parts loading system with coolant paper filtration system, chip conveyor, IFM mist extraction unit, oil chiller, automatic doors, foot switches, wash gun, handwheel, signal tower & manuals. Overall dimensions: L9,347mm x W4,646mm x H3,018mm. Weight 24,000kg. With dual rohm KUBF-400/4 Ø400mm power chucks. Swing Ø640mm. Bodpfxjz Hzuwo Ahmsln Maximum turning Ø640mm. Maximum turning length 1,500mm. Axis travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle bore Ø107mm. Maximum bar capacity Ø92mm. Maximum main spindle speed 4,000rpm (45kW Motor). Maximum sub spindle speed 4,000rpm (45kW Motor). Maximum rotary spindle speed 12,000 (22kW Motor). Rotary spindle taper capto C6. 60 position ATC. 12 position sauter turret. 20 position loading station with air blast cleaning tank.

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. Bledpfxjtq Ufvs Ahmon The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: excellent (used), Year of construction: 2021, 2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). Bljdpfxez H U Uko Ahmon Overall Dimensions L4,350 x W2,040 x H2,515mm. Weight 5,900mm.

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring Bsdpfx Ahjgn Edlomoln

Condition: used, TOS lathe Bljdpfx Aszxpzxjhmjn Type SUA 150 CNC Capacity: 6000 m Year: 1998 CNC Siemens 840 Accessories: Supplied with eye shields.

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic press, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in new condition. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please request a price including transport (location within the Netherlands). If you would like to purchase this machine now, please send us your company details and your VAT number. We will then send you a proforma invoice. Bedozc I Exjpfx Ahmjln Regards, Henk Hoos.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. Bjdjxdmgvepfx Ahmeln 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: excellent (used), mileage: 508,877 km, power: 110 kW (149.56 HP), first registration: 09/1991, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, Year of construction: 1991, Tail lift: Yes WVML044053G070621 Bledpfx Ahoymrvpemsn = More information = Empty weight: 5.260 kg Carrying capacity: 5.140 kg GVW: 10.400 kg Technical condition: very good Visual appearance: very good Registration number: 1WBE674 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Bodpfxsu Nyxwj Ahmoln Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands

Year of construction: 1994, condition: good (used), Manufacturer: Rollomatic Year of manufacture: 1994 Type: CNC 24-F Machine number: 142 Bsdpfx Ahowhznxemjln 3 x 380 V, 50 Hz

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Blade 500mm Bledpfxjxrg R Re Ahmon

Condition: used, Year of construction: 1984, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Bljdpfx Ahjb Hv Twomjn Rotary table Skoda E20

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data Bledpfx Ahoz Dai Uemon • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Bjdpfx Ahjxnzd Djmeln Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading - Fire protection system

Condition: new, sheet width 3100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 14 Stück no. of strokes 13 Hub/min oil volume 260 ltr. cutting angle 2,0 ° throat 350 mm engine output 22,0 kW Bodpfx Ahjxabdbjmeln back stop - adjustable 1.000 mm weight 10.575 kg. range L-W-H 4,05 x 2,5 x 2,17 m ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Quantity * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Bsdswcgdnepfx Ahmsln used - efficient

Year of construction: 1995, condition: ready for operation (used), Generator: Agiepuls 60 HSF, travel X/Y/Z: 350mm/250mm/350mm, table dimensions X/Y: 600mm/450mm, max. workpiece weight: 400kg, max. workpiece dimensions X/Y/Z: 840mm/600mm/250mm, max. electrode weight: 100kg, machine dimensions X/Y/Z: approx. 2450mm/1750mm/3000mm, weight: approx. 4000kg. The machine has PCB damage. Documentation available. An on-site inspection is possible. Blodpjyugmfjfx Ahmsn