Used Juaristi Ts1 for sale (220)

Condition: good (used), Code: 0364 Brand: SAC Model: TS 110 - CE Standard Bdjdpfx Adoy Erk Sj Ajb Spindle moulder for milling and jointing operations on wood, plastics, composite materials, and various - CE Standard Technical specifications: Table dimensions mm 1100 x 900 Table height mm 860 Spindle diameter mm 40 Max applicable tool diameter mm 240 Spindle vertical stroke 2900-4500-6000-10000 rpm Motor power 5,5 Hp Overall dimensions mm 1100 x 900 x 1100 h Weight kg 780

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm Bdedpsy Ayiqefx Ad Aeb PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Bdsdpfx Adoy D D A Ds Asb Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: excellent (used), mileage: 192,835 km, power: 70 kW (95.17 HP), first registration: 02/2017, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, CO₂ emissions: 30 g/km, fuel tank capacity: 75 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, total length: 5,400 mm, total width: 1,960 mm, permissible axle load (axle 1): 1,585 kg, permissible axle load (axle 2): 1,650 kg, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power assisted steering, sliding door, soot filter, trailer coupling, General information Number of doors: 5 Registration number: V-542-DT Bjdjwqdlfopfx Ad Asdb Technical information Number of cylinders: 4 Engine capacity: 1.598 cc Axle configuration Tyre size: 205/65R16 Brakes: disc brakes Front axle: Max. axle load: 1585 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Rear axle: Max. axle load: 1650 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 1.875 kg Carrying capacity: 1.065 kg GVW: 2.940 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption (WLTP): 6,7 l/100km (42 MPG) Urban fuel consumption (WLTP): 8 l/100km (35 MPG) Extra urban fuel consumption (WLTP): 6 l/100km (47 MPG) Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - Alloy wheels - Multifunctional Steering Wheel - Parkingsensors back - Particulate filter - Side Door Right - Stability control = Remarks = = Additional options and accessories = - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Euro 6 - Front fog lights - Multifunctional steering wheel - Panelling - Sliding side door right - Towbar

Condition: used, empty load weight: 2,290 kg, maximum load weight: 8,710 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 02/2017, loading space length: 6,230 mm, loading space width: 2,470 mm, suspension: steel, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 18 x lashing points, loading height approx. 0.89 m, surcharge for aluminum ramps €800, -- Typographical errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Bdjdpfx Adoy Di Tzs Aeb

Year of construction: 1996, condition: used, machine/vehicle number: 20254, with pre-installed and add-on roller conveyor as well as frame rack Bedpfx Adoy Aqczo Asdb

Condition: ready for operation (used), Year of construction: 1998, SAC milling machine €2,000 Set of 20 cutter tools €2,000 Bjdpfsx Av Aqsx Ad Aedb

Condition: used, Year of construction: 2015, working width: 9 mm, Equipment: lighting,

Condition: used, Year of construction: 2004, total length: 4,000 mm, total width: 2,200 mm, total height: 2,100 mm, Weight: 9.800 kg Price: On request - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: B8820 - Drive system: CNC - Drive type: Hydraulic - Power [kW]: 15.0 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3100 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic Bjdpfx Adeyf Hpzj Ajdb - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Ball-bearing table - Transport dimensions: 4000mm x 2200mm x 2100mm (l x w x h) - Transport weight [kg]: 9800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, lifting height: 15,100 mm, fuel type: electric, color: other, Year of manufacture: 2011 Drive: Wheel GVW: 5.120 kg Dimensions (LxBxH): 328 x 122 x 236 cm Lifting capacity: 400 kg Working height: 1.710 cm Technical condition: very good Visual appearance: very good Please contact Ton for more information Manufacturer: PB Lift Type: S171-12E Year of manufacturing: 2011 Weight: 5.120 KG Hourmeter: Unknown Drive: Electric, 4x2 Product number: 24012 Platform height: 15,10 m Working height: 17,10 m Platform measurements: 119x274 cm Extendable platform: 100 cm Total measurements LxWxH: 328x122x236 cm Max. platform load: 400 KG Bedpjyywqyofx Ad Ajdb Fitted with hydraulic outriggers Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 11.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: good (used), Year of construction: 2008, fuel type: electric, color: other, Year of manufacture: 2008 Drive: Wheel GVW: 4.670 kg Dimensions (LxBxH): 300 x 122 x 236 cm Lifting capacity: 400 kg Working height: 1.710 cm Technical condition: good Visual appearance: good Please contact Ton for more information Manufacturer: PB Lift Type: S171-12E Year of manufacturing: 2008 Weight: 4.670 KG Hourmeter: 0 Drive: Electric, 4x2 Product number: 23035 Platform height: 15,10 m Working height: 17,10 m Platform measurements: 119x274 cm Extendable platform: 100 cm Total measurements LxWxH: 300x122x236 cm Max. platform load: Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Bdjdpfx Adeyywp Ao Aeb Price: € 9.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, empty load weight: 2,800 kg, maximum load weight: 9,200 kg, first registration: 08/1995, next inspection (TÜV): 05/2016, total width: 25,500 mm, suspension: steel, tire size: 295 / 80 R 22.5 / 8mm, front tire size: 295 / 80 R 22.5 / 8mm, operation weight: 12,000 kg,

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Bedpfxsx Sxg Ho Ad Aedb

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Bsdpfx Adjx Sxgye Asdb

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system Bjdpeqmc Raefx Ad Aodb 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm Bdsdpfx Adey D Hias Aob

Year of construction: 2025, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, spindle motor power: 20,500 W, spindle speed (max.): 5,000 rpm, table load: 3,000 kg, number of axes: 5, This 5-axis SACHMAN TS10 bed type milling machine was manufactured in 2025. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details. • Gooseneck: 1,000 mm • Axis speed (rapid): 25 m/min • Table size: 2,700 x 800 mm • Handwheel: Portable HR 510 • Milling head: KOSMO3 Universal • Spindle taper: SK50 BIG PLUS • Indexing: B/A 0.02°/0.02° (Hirth coupling) • Tool magazine: MRT24 (24 positions), vertical change position • Enclosure: Standard housing (no roof) • Training: 2-day operator course at customer site • Delivery time: Approx. 4 months from order Bodjyxpmqopfx Ad Ajdb • Warranty: 12 months Additional equipment • Chip management: 2 x screw conveyors along X-axis + additional belt conveyor in Y-direction • Internal cooling: 15 bar through-spindle coolant with bag filter • External blow-out air

Condition: used, Year of construction: 2004, functionality: fully functional, motor manufacturer: SEW, Equipment: type plate available, Curved Belt Conveyor, Conveyor Belt Curves, Belt Curve 45 Degrees with Drive Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-105/45Degree Total external length: approx. 1200 mm Total internal length: approx. 540 mm Total width incl. motor: 1100 mm Conveyor width / belt width: approx. 700 mm Belt type: smooth belt, KT58-smooth Including support legs Including SEW motor with Movimot unit 1.1 kW, 2900/393 rpm Stock quantity: 3 units Price: per unit Internal item number: 2026032306 Conveyor technology – reliable and ready for immediate use The conveyor system offered here was in continuous operation up until dismantling and is fully functional. Features: • Condition: fully functional, with normal signs of use • Ideal for efficient and fast material handling • Properly dismantled and packaged for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to high-quality workmanship, this conveyor system ensures smooth and gentle material flow – even under heavy loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We are happy to assist you with the planning, design, and implementation of customized solutions. Upon request, we will provide you with a tailored offer. Simply let us know your requirements and site conditions. Benefit from our many years of experience and our strong network of specialists. We successfully realize projects for a wide range of industries, including: • Logistics Bsdoywwc Dspfx Ad Asdb • Pharmaceutical industry • Trades • Electronics sector Together, we develop economical and sustainable solutions to optimize your material flow. We also provide comprehensive support in automated sorting technology and complementary systems such as pick racks or container solutions.

Condition: used, Year of construction: 2020, functionality: fully functional, motor manufacturer: SEW, Equipment: documentation/manual, type plate available, Curve belt conveyor, belt curve conveyors, 90-degree belt curve with drive Manufacturer: Transnorm Year of manufacture: 2020 Condition: used Model/Type: TS 1600-090/90 Degree Overall outer length: approx. 1850 mm Overall inner length: approx. 760 mm Dimensions: RN: 600, BN : 600, WN: 60 deg Conveying width: approx. 600 mm Belt type: belt with fabric reinforcement Including 200 mm high side guides Including SEW motor with Movimot version, 1.1 kW, 2900/504 rpm Internal article number: 2026032305 Conveyor technology – reliable and ready for immediate use – The conveyor system offered was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with normal signs of wear • Ideal for efficient and fast material handling Bjdjywvr Dopfx Ad Aedb • Professionally dismantled and securely packaged for transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thanks to its high-quality workmanship, the conveyor technology ensures a consistent and gentle flow of materials—even under heavy loads. Tailored solutions for your intralogistics Whether roller conveyors, belt conveyors, incline conveyors, or telescopic conveyors for loading and unloading—we are your competent partner. We are happy to assist you with the planning, design, and implementation of customized solutions. Upon request, we will provide you with a tailor-made offer. Simply let us know your requirements and site conditions. Benefit from our many years of experience and strong network of specialists. We successfully realize projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts and trades • Electronics sector Together, we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support for automated sorting technology and complementary systems such as order picking racks or container solutions.

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Lotus LTS 14’ heat transfer press Item for sale: 1x Lotus LTS 14: Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested and is in working order Bsdpfxjywtz Ae Ad Aedb Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, mileage: 28,910 km, power: 129 kW (175.39 HP), first registration: 07/2023, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 6, total width: 2,500 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, MB FUSO 8 180 TT-S Horsetruck For 1-3 horses, rear and side ramp, pop-out, underfloor storage beneath the living area, external storage compartments all around. 4 berths, living room, video surveillance. Stationary air conditioning, auxiliary heater, 1 TV/SAT, real wood finishes, bathroom, shower, WC, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external tack locker, winch, cruise control, alloy wheels, navigation system, towbar, and much more. Errors/data entry mistakes & interim sale reserved. * NET SALE POSSIBLE. * Top leasing offers * Net price in Germany plus 19% VAT. Available immediately // Location and vehicle viewing: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 Bodpfx Adsywqxlj Asdb 23816 Leezen Sales and service for all makes in the area of horse transporters and trailers. Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Table Milling Machine TS110 Bjdpfx Aev Im Swod Aodb Year of manufacture: 1990 380 Volt, 7.5 HP Milling fence with fine adjustment 4 spindle speeds: 3,000, 4,500, 8,000, and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 feed speeds Feed rollers new Transport available at additional cost!

Condition: used, Year of construction: 2007, machine/vehicle number: M1348, Dimensions: 255 width x 170 depth x 254 height Weight: 4,100 kg Max pressing force: 400 kN (40 tons) Max bending length: 1,600 mm Distance between uprights: 1,600 mm X-axis travel: 600 mm Max stroke: 290 mm Controlled axes: X, Y, R Bedpfoylhkysx Ad Aodb Control: Equipment: 4 backgauges Condition: Original monitor defective --> Second monitor installed and connected to the machine. (Works) Crowning: Servo-mechanically operated Power Belt system --> even force distribution The machine is fully operational and in good overall condition.

Condition: used, Year of construction: 1986, HESSMERT - TS 100 - 1986 Bsdpfx Adjymr Uls Asdb - 100 t spotting press /Tuschierpresse/ - table 1400x1050 mm - open height 1200 mm - closed height 400 mm - stroke 800 mm - retrofitted hydraulics from 2024  - columns resealed from 2024 - very good condition

Condition: used, Year of construction: 2024, _____WTS-1200 Wet Salt Equipment Standard Equipment: Stainless steel folding cover, spreading container with brackets and drive, grating, removable parking stand, mounting bracket for category 2 and 3, fully hydraulic drive of the feed auger and spreading disc shaft, specially coated spreading container, stainless steel sliding plate, stainless steel spreading disc, stainless steel spreading disc device, equipment safety cover, protective cover for the hydraulic valves and electrical distribution, hydraulic block with anti-reverse protection, pressure oil filter, electronic spread pattern adjustment, LED lighting, color RAL 2011, Win-Icom road-dependent control system, stainless steel agitator shaft. Additional Equipment (for an extra charge): Work lights, wet salt system, 500L front tank made of plastic, rubber apron, winter service marking. Price from €23,450 (net). The photo is an example and may include special equipment. Storage location: null Bdsdpfju Ebk Hex Ad Aob