Used Julabo Cryo-Compact Thermostat for sale (4,110)

Condition: new, Indramat DDC01.2-N200A-D Digital A.C. Servo Compact Controller DDC, SN 270812-04032, unused after overhaul by the manufacturer, 100% functional Fjdpji Ebdzefx Ad Nopg

Condition: ready for operation (used), Contraves Varidyn Compact ADB 190.30M frequency inverter , serial no. according to photo ,used, little traces of use, 100% functional Fsdpfsi D Umtjx Ad Njpg

Condition: ready for operation (used), Indramat DDC01.2-N200A-DL05-01-FW Digital A.C. Servo Compact Controller DDC SN: 270012-03456, used, 100% functional Fodpsi Ebd Njfx Ad Nspg

Condition: ready for operation (used), Contraves Varidyn Compact ADB190.30 M frequency converter , used, good condition, 100% functional Fpedpfxoi D Umlj Ad Nog

Condition: ready for operation (used), Indramat DDC01.1-K150A-DL02-00 Digital A.C. Servo Compact Controller DDC SN: 257450-01139, with cooling fan, used, 100% functional Fodpei Ebdhsfx Ad Nopg

Condition: ready for operation (used), Indramat DDC01.2-N200A-DL01-01-FW Digital A.C. Servo Compact Controller DDC SN: 270812-08138, used, normal signs of use, 100% functional Fpedpfx Aji Ebd Eed Nog

Condition: used, Year of construction: 2010, Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle  Fedpjuca Amefx Ad Njpg

Condition: good (used), Year of construction: 2015, operating hours: 5,790 h, load capacity: 1,000 kg, lifting height: 5,300 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, empty load weight: 3,000 kg, mileage: 5,790 km, This TRIPLEX reach truck from STILL is from 2015 and is in good condition; Capacity of 1,000 kg; Lifting height up to 5,300 mm; Overall lowered height is 2,300 mm; Equipped with FREELIFT and SIDESHIFT; Fork length 1,150 mm; 5,790 hours on the meter; The battery comes with an external charger and automatic filling system; Video to follow. Fjdjxwdhqjpfx Ad Nepg

Condition: good (used), Year of construction: 2017, operating hours: 1,021 h, load capacity: 1,600 kg, lifting height: 1,010 mm, fuel type: electric, mast type: duplex, construction height: 1,400 mm, empty load weight: 596 kg, mileage: 1,021 km, MULTIPLE IN STOCK. This DUO electric stacker from LINDE, year 2017, has a capacity of 1,600 kg as a pallet truck. Lifts 800 kg up to a height of 1,010 mm. The stacker is equipped with INITIAL LIFT, making it ideal for uneven floors. All functions work well. ONLY 1,021 hours on the clock. The stacker comes with a battery featuring an automatic filling system and an INTERNAL charger. Delivery within three working days. Immediately ready for use and, if desired, can be supplied with inspection certificate. Video follows. Fodpfxoxzzx Ue Ad Nspg

Condition: used, Year of construction: 2003, total width: 1,200 mm, total height: 1,600 mm, Colour: Grey Dimensions (LxBxH): 365 x 120 x 160 cm Four-sided planer SCM Compact P Year of construction 2003 Min/max working height 6/120mm Min/max working width 25/230mm Minimum input length is 450mm Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 120/165mm Input table length 2480mm Exclusive tools. Engines 1st Spindle - Under 5,5kW 2nd/3rd Spindle - Left/Right 7,5kW 4th Spindle - Above 7,5kW Dimensions 3600x1200x1500mm (LxWxH), Weight 1500kg - Year: 2003 - Documentation available: No - CE certificate present: No - Serial number: 021918 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 2: - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 3: - - Motor power [kW]: 5.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - └ Spindle 4: - - Motor power [kW]: 4 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - - Max. planing block diameter [mm]: 125 - Max. planing width [mm]: 230 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 1 - Feed speed: - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 12 Fsdpfxewnhtzo Ad Nopg - Transport dimensions: 3650mm x 1200mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2000, Colour: Grey Four-sided planer Leadermac LMC623C Year of construction 2000 min/max Working height 10/150 mm min/max Working width15/230 mm Working speed 6-24m/min Spindle speed 6000 rpm Spindle diameter 40mm engines1st. Spindle - right 5.5kW 2nd Spindle - left 5.5kW 3rd Spindle - right 5.5kW 4th. Spindle - above 7.5kW 5. spindle - above 7.5kW Fpjdownhv Aepfx Ad Njg 6th. Spindle - Universal 7.5kW Dimensions 4500 x 2000 x 2000 mm (L x W x H), weight 3500 kg - Year: 2000 - Documentation available: No - CE certificate present: No - Serial number: LMC623C Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, total width: 1,550 mm, total height: 1,500 mm, Colour: Grey Dimensions (LxBxH): 325 x 155 x 150 cm Four-sided moulder SCM Compact 23K Built in 2002 Min/max working height 120mm Min/max working width 230mm Fpodpfx Aewnhk Tod Neg Working speed 6/12 m/min Spindle speed 6000 Rpm Spindle diameter 40mm Min/max tool diameter vertical spindle 100/180mm Input table length 2500mm CNC Program Engines 1st Spindle - Under 5.5kW 2nd/3rd Spindle - Left/Right 11kW 4th Spindle - Up 7,5kW Dimensions 3250x1550x1500mm (LxWxH), Weight 1800kg - Year: 2002 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 3250mm x 1550mm x 1500mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2016, operating hours: 4,710 h, load capacity: 1,600 kg, lifting height: 5,220 mm, fuel type: electric, mast type: simplex, construction height: 2,260 mm, empty load weight: 3,200 kg, mileage: 4,710 km, Electric compact triplex forklift Brand: Still (Germany) Year of manufacture: 2016 Capacity: 1,600 kg Lifting height: 5,220 mm Clearance height: 2,260 mm ONLY 4,710 operating hours Equipped with FREELIFT Equipped with SIDESHIFT And a FOURTH VALVE Battery: with external charger Automatic filling system Watch the video on YouTube Fsdpfx Adoy Iwl He Nepg

Condition: used, mileage: 250,300 km, power: 85 kW (115.57 HP), first registration: 09/2014, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 2,700 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 2,400 mm, loading space height: 1,300 mm, Year of construction: 2014, - Used Truck: Opel Vivaro 27 Van L1 H1, 3 seats. - Year: 2014, Engine: 2.0 CDTi 115hp Euro 5, 6-speed manual gearbox, Mileage: 250,300 km. VEHICLE WITH FAULTY / VERY NOISY GEARBOX - Van L1 H1, Cargo area dimensions: 2,400 x h. 1,300 mm, Load floor covering, Payload: 1,000 kg. - Equipped with: Air conditioning, Radio-CD with Bluetooth, Central locking, Double keys. - Bodywork with some scratches and dents, Interior in good condition, Mechanically running. - Inspection valid until March 2027, One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province) Lombardy. Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00, Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Ownership transfer on site. Carlo Mauri Srl declines all responsibility for any unintentional inaccuracies in this ad, which does not constitute a contractual commitment; prices shown exclude VAT and transfer fees. Fsdpoywrzzofx Ad Njpg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Fsdpfx Adey Icdhs Nspg

Condition: used, Year of construction: 1998, Compact welding cell ABB Robotics IRB 1400 with manual turntable and Fronius TPS 4000 welding unit Overall dimensions: approx. 4000x2350mm Robot: ABB Robotics IRB 1400 Control system: S4-M98A Max. working radius: approx. 1450mm Payload: 5kg Year of manufacture: 1998 Fedoy Niiyepfx Ad Nepg Spare parts are constantly available from stock. The robot is fully functional and can be inspected at any time. 2 weeks commissioning warranty. No further warranty.

Condition: new, Year of construction: 2016, Compact cell Fanuc ArcMate 100/7L with R30iB controller, new Lorch S3 pulse welding unit Number of axes: 6 Max. payload: 7 kg Max. working range: approx. 1633 mm Year of manufacture: 2016 Table area per side: 750x500 mm Overall dimensions: approx. 2500x1500x2200 mm Overall weight: approx. 2000 kg Fpsdpfsy Nih Nex Ad Nsg Spare parts are always available from stock. The robot is fully functional and can be viewed by arrangement. 2 weeks commissioning guarantee. No further warranty.

Condition: new, Year of construction: 2026, The THEOR 20 screw compressor with a refrigerated compressed air dryer. The CORMAK THEOR series screw compressor, manufactured by the Polish brand CORMAK, represents the latest solutions used in pneumatics combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and durable construction, and high efficiency guarantee effective and trouble-free operation. CORMAK screw compressors are synonymous with innovation and reliability, designed for the most demanding applications. Innovative design: Our compressors are based on advanced engineering and European precision manufacturing. The robust construction, enhanced with modern components, ensures long-lasting and reliable operation in all conditions. Integrated refrigerated dryer: The COMPACT version with an integrated dryer saves space and provides a complete all-in-one solution. The built-in refrigerated dryer ensures dry and clean air, protecting your installation from corrosion and damage. Quiet operation and comfort: Designed with attention to detail, our compressors feature exceptionally low noise levels. Effective soundproofing and vibration reduction systems provide a comfortable working environment, improving operator concentration and well-being. Intelligent control: The intuitive MAM series electronic control panel serves as the command center of your compressor. It enables precise parameter monitoring, maintenance scheduling, and quick diagnostics, ensuring stability and protection of key components. Adaptation to your needs: We understand that every application is unique. CORMAK compressors can be configured with additional air treatment systems, allowing perfect adaptation to the specific requirements of your industry. Dynamic working pressure: Automatic pressure regulation ensures that the compressor delivers exactly as much compressed air as needed at any given moment, maximizing energy efficiency and minimizing losses. Sustainable development: We focus on environmentally friendly solutions. The energy-saving technologies used in our compressors not only reduce your operating costs but also minimize environmental impact, while the heat recovery option allows maximum energy utilization. Technical Specifications Parameter Value Motor power 15 kW Voltage 400V / 50Hz Capacity at 0–6 bar 2100 L/min Capacity at 6 bar 2000 L/min Capacity at 8 bar 1700 L/min Capacity at 10 bar 1600 L/min Fpsdpfx Aey Rpmnsd Nog Outlet connection diameter (G) G1" Dimensions 1550 × 740 × 1180 mm Weight 500 kg

Condition: new, Year of construction: 2026, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW Fpedpfx Aomqlqded Nsg General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Manufacturer: APD Type: 12 SC Delivery capacity: 3600 l/s Max vacuum: 5x10-6 Torr Ideal for high vacuum Fjdjcwrn Eepfx Ad Nepg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Commissioned: 2025 Condition: Demo machine — less than 200 production hours, essentially as-new Type: CNC plasma pipe profiling machine (6-axis) Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a state-of-the-art 6-axis CNC pipe cutting machine capable of processing round pipes with diameters up to 914 mm and lengths up to 12,000 mm, with wall thicknesses between 3 and 50 mm. Installed in 2025 in Belgium, this machine has less than 200 running hours, making it virtually new but available at a pre-owned price point. The 6th CNC axis ensures a constant torch-to-material distance for perfect weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head offers torch adjustment of ±60° and 380° rotation, allowing highly accurate contour cutting for any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-bevel weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor system on rails — Dual-point fume extraction (at cutting head and through the chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — Electrical cabinet with CNC unit, PLC, IP54 protection, and power buffer — Industrial PC with 22” touchscreen and mobile control panel — All safety devices (CE certified to 2006/42/CE and 2004/108/CE standards) — Complete technical documentation, operator manuals, and installation drawings Key specifications: — Clamping diameter range: 50 – 914 mm Fsdpfx Ajy H I Trjd Njpg — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel angle: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation dimensions: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Important: COROBS machine control software licenses are not included and must be obtained separately from Voortman. Voortman offers professional reinstallation, commissioning, operator training, and maintenance contracts at the buyer's site. Why choose this machine? A new MO Compact 900 currently costs over EUR 350,000 and comes with a 6–12 month delivery time. This unit delivers identical capabilities, is immediately available, and represents significant savings. Full OEM support from Voortman is available to the buyer. Location: Belgium (inspection by appointment) Delivery: Ex-works. Dismantling and transport subject to agreement. For questions or further information, please send us a message or call.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system - Automatic door-up and table-out system - Dual temperature water cooling system - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands Fjdpevcbf Iefx Ad Njpg

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm Fsdpfx Adsywhvno Nspg - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: used, Year of construction: 2014,

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 1,800 mm, total height: 1,400 mm, total width: 1,000 mm, KALLFASS Shrink Tunnel COMPACT 450 SO (Used machine, year of manufacture 2003; sold as is, where is) On consignment from customer Description: Compact and economical shrink tunnel featuring the patented ring nozzle heating system with highly effective air flow regulation. Equipped with infinitely variable rod chain conveyor. The rotatable rod device prevents undesirable marks on the bottom of the packaged goods when using technical films such as Clysar ®, Cryovac ®, and others. This tunnel is particularly suited for shrinking small to medium format products with moderate throughput requirements. Comprehensive standard equipment includes: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Optional device for rotating transport rods • Infinitely variable speed control for the rod chain conveyor • Infinitely variable tunnel fan power, adjustable according to film quality • Energy-saving 2-stage heating system with highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Adjustable tunnel clearance height • Adjustable working height Technical data: Fedpfx Aoy Ic Aksd Njpg Tunnel passage width: 450 mm Tunnel passage height, adjustable: 100 - 400 mm Length of heated tunnel hood: 1,400 mm Working height, adjustable: 800 - 900 mm Conveyor speed, variable: 2.5 - 12 m/min Drive: AC motor 0.25 kW Airflow regulation: Patented ring nozzle system Temperature control: Electronic thermostat Power supply: 400 Volt three-phase, 50 Hz with protective earth Installed heating capacity, 2-stage switchable: 9 + 4.5 kW (continuous operation consumption approx. 40%) Rated power: 24 kW Rated current: 36.0 A Control cabinet position and operator side: Left, in direction of operation Finish: Kallfass anthracite Additional equipment: • 300 mm cooling station with ball-bearing mounted aluminium rollers at the tunnel outlet • Special cooling fan mounted above the tunnel outlet