Used Jwei Cb03Ii-2516-Rm for sale (4,654)

Condition: ready for operation (used), Philips 4022 226 3656 RM DRIVE MOD card, condition and serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iodpfx Ahei Ech Sjzoaw

Condition: ready for operation (used), Philips 4022 226 3632 LM / RM DRIVE MOD card, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Isdpfx Aey Nrzxjhzsaw

Condition: ready for operation (used), Philips 4022 226 3653 RM DRIVE MOD card, serial number: D000619, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iodpfelpkvcjx Ahzeaw

Condition: ready for operation (used), Philips 4022 226 3652 RM DRIVE MOD card, serial number: D001184, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iasdpfxslpku Uo Ahzew

Condition: ready for operation (used), Philips 4022 226 3643 RM / RM DRIVE MOD card, condition and serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iajdpfxsi Echke Ahzsw

Condition: ready for operation (used), Philips 4022 226 3647, 2 RM / RM DRIVE MOD card, serial number as shown in the photo, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iaedpfei Echyox Ahzsw

Condition: ready for operation (used), Philips 4022 226 3656 RM DRIVE MOD card, serial number as shown in the photo, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Ahsi Eciaszoaw

Condition: used, Year of construction: 1984, material width:350 mm coil weight:1 t material thickness:0,5 - 6 mm coil internal diameter:380 - 540 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 weight of straightening machine:2 t dimensions straightener (WxDxH):2,0 x 2,0 x 1,9 mm Iajdpet Hmk Tjfx Ahzjw weight of decoiler:1,3 t dimensions decoiler (WxDxH):1,7 x 1,5 x 1,6 m

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm Iasdpfx Ahsdnzvdjzsw strip width: 50 - 200 (250) mm strip thickness: 2 - 10 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Iodpoynm D Djfx Ahzoaw Türkei 6700 € 129.31 € 1270 mm 2.5 mm 90 mm 6 m/min 1.1 kW 1850 mm 700 mm 1200 mm 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH

Condition: new, Year of construction: 2025, neu 2025 090120 Iajdpfx Ajwira Iehzew prompt, Zwischenverkauf v Türkei 7500 € 144.75 € 1 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6500 € 125.45 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor Iajdpfx Ahswiqnwezsw lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 7000 € 135.1 € 1550 mm 2 mm 90 mm 6 m/min 1.5 kW 2130 mm 700 mm 1200 mm 545 kg Iaedpfx Aewiqnkehzow 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,-

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, Rated voltage: 100V AC±10% Power consumption: 340VA Rotary microtome The LEICA RM2155 is a robust, fully motorized rotary microtome designed for the precise production of thin sections from paraffin- or resin-embedded samples for histological, pathological, and materials analysis applications. The instrument combines motorized automation with manual fine control, ensuring reproducible sectioning quality even at high throughput rates. Technical features: - Motorized sectioning with adjustable speed and motorized coarse advance, optimizing workflow for routine and demanding specimens. - Adjustable section thickness range from 0.5 µm to 60 µm with fine increments to accommodate varying material requirements. - Specimen advance: 27 mm via stepper motor - Vertical stroke: 70 mm - Maximum sectioning range without retraction: 65 mm (without specimen orientation) - Maximum sectioning range with retraction: 60 mm - Specimen retraction in motorized cutting mode: 10, 30, 70 µm (adjustable depending on speed, can be deactivated) - Specimen retraction in manual cutting mode: 5, 10, 15, 20 µm (can be deactivated) Iodpfx Ahoytrpvozjaw - Movability of knife holder base: N/S travel ±25 mm, E/W travel ±20 mm - Maximum specimen size (WxHxD): 50 x 60 x 40 mm - Specimen orientation: horizontal 8°, vertical 8°, rotation ±90°, trimming steps 5, 15, 30 µm - Electric coarse drive: 900 µm/s Cutting motor: - Cutting speed: 0; 0.5 – 420 mm/s - Return stroke speed: approx. 120 – 420 mm/s Application areas: Production of consistent tissue sections for microscopic analysis in histology, pathology, neuropathology, as well as in materials science investigations; suitable for both research and routine laboratory environments with high demands on sectioning precision and reproducibility. The LEICA RM2155 stands out for its technical reliability, precise sectioning performance, and versatile application possibilities, making it a long-term investment for demanding laboratory processes. Including: power cable, knife holder base, knife holder NZ, standard chamber, foil chamber, carbide knife (16 cm), manual

Condition: used, volt / V ampere / A weight / kg total power requirement / kW SCHORCH - K 733 / 4M - RM.12807/27 Ijdpfjy Tbw Rsx Ahzjaw Type: K 733 / 4M Revolution: 1430 rpm 50Hz 15.2A 380v Weight: 80kg

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Isdpfjy Shgpox Ahzjaw Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Iajdpfsm Twz Aox Ahzjw Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Weight: 15000kg

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Height: 2100mm Ijdpfx Ahey Dr Eajzsaw Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Lowboy Trailer with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights, and Ramps * Fifth wheel load capacity increased from 12 t to 18 t, including: Fifth wheel mounted in: Second fifth wheel position, 2", fifth wheel up to and including Kingpin distance 2,750 mm. Rear swing radius approx. 2,400 mm in clear space (a minimum clearance of 150 mm is recommended). Front swing radius 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance to the tow vehicle must be ensured by the customer. * Retractable sections for the wheel recesses at the front and bottom at the rear (205 mm deep). 6 pieces of decking for wheel recess holders as receiving shafts according to code 09.112. Aluminum compressed air tank instead of steel. * Smartboard control box mounted on the trailer as an information tool with pressure sensors, ultimately for displaying the total axle load. Display option selectable either via the control box or in the truck via the EBS air suspension system (truck manufacturer dependent). * ?SP Combination Package: Toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the fifth wheel platform W=2,480 x H=500 mm with a hinged lid on top, side doors, and sloping sides on the left. Aluminum side walls that can be folded down to the fifth wheel platform (500 mm high), aluminum rear wall inserted (150 mm high), aluminum side walls painted inside and outside in RAL 9006 white aluminum. Including folding and detachable rear supports, galvanized (without top coat). Including bolted front extension. Length of front crossmember to kingpin distance 3,935 mm. Front swing radius, without spare wheel, at kingpin distance 2,450 mm or 2,750 mm approx. 1,750 mm or approx. 1,480 mm. * 2 container locking mechanisms recessed into the front crossmember. Ijdpfoy R Ipujx Ahzoaw * 3 receiving shafts under the fifth wheel platform for storing optional aluminum ramps or wooden planks for covering the wheel recesses. * Folding or extendable support legs (galvanized) and wooden planks for widening included (not on the rear slope). Plank holder on the fifth wheel platform (the gauge of the load may be a maximum of 2,500 mm). * Second LED position light on the warning package at the front and rear (double lighting), only in conjunction with the warning package. * 2 LED reversing lights on the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V), max. 2 additional lights allowed. * 7-pin socket on the rear, wired for overlength lighting with rear light (58 R) and ground. * Rubber covering on the access ramp on the left and right (approx. 860 mm long), 190 07644 rubber covering strip, on the inner plank of the single-piece ramps. * Central lubrication system fully automatic with pump (24V), grease tank, and integrated trailer control, without connection to the ramps (in case of steering: including connection to the distributor on the fifth wheel platform). Note: Only possible with tow vehicles with a 24V electrical system! Intermediate sale and errors are expressly reserved! Sale exclusively subject to our general terms and conditions. Important note – Important information: Despite careful checking of all details in our offer, it may happen that errors occur. In some cases, these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is p

Condition: excellent (used), Year of construction: 2006, number of straightening rollers: 19, straightening roller diameter: 55 mm, working width: 1,600 mm, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm design: 6 hi/cassette No. of levelling rolls: 19 Iodpfoy Nxv Nex Ahzeaw levelling roll Ø: 55 mm intermediate roll Ø: 30 mm

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Manufacturer: Lima Model: RM 700 DSP Year: 2000 Iaedpfxjy D Nl Rj Ahzsw Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Technical specifications: - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm Isdpfxsyvzq Ao Ahzjaw - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg - Control: Beckhoff This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: new, working width: 2,300 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Greentec RM 232 Hedge Mulcher / incl. MS08 Adapter Plate / NEW machine / in stock & immediately available Price: €14,590.00 net / €17,362.10 gross - Working width: 2,300 mm - Number of rotors: 4 units - Number of blades per rotor: 6 - Max. branch diameter: 4 cm - Working speed up to: 4 km/h - Required oil connections: 1 x double acting + 1 x free return (leakage oil) - Minimum oil flow: 50 l/min at 180 bar - Weight: 310 kg Delivery without hydraulic hoses and oil flow divider! Key advantages: - High capacity – Efficient maintenance of large hedgerows - Unique cutting system – Cuts and mulches branches in a single process Iasdpfx Asy E Ettehzjw - Very long lifespan – Built with high-strength steel components The RM 232 branch cutter is designed for professional use by municipalities, farmers, and contractors. The machine stands out with its large working width and high operating speed, ensuring impressive capacity. Branches are cut and shredded in one pass. The processed material is gently deposited beneath the unit, initiating natural decomposition. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse offers a wide range of various Greentec products, all available for immediate delivery! Mr. Herden (phone ...) is at your service. On request, we are happy to provide you with a financing offer. We are official distribution and service partners for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. Additionally, with over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale. = Further Information = Please contact Marius Herden for more details.

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm Iaedpsi E Hp Tofx Ahzsw rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, 10 cup wheels vertical edging machine + Clean 20 floculant water treatment system variable angle 0-45° glass thikness : 3 - 55 mm min. glass dimension : 100 x 100 mm max. load : 1800 kg height of work surface : 840 mm total power : 20 Kw tank capacity 340 L forward speed : 0,4 - 5,5 m/min. total weight : 3800 kg Iasdsymxk Hopfx Ahzow