Used Kardex Sys120-2011 for sale (1,471)

Condition: used, Year of construction: 2011, functionality: fully functional, WEILER C30 cycle lathe (2011) Manufacturer: WEILER Type: C30 cycle lathe Year of manufacture: 2011 Condition: Used Lrjdpfxjzy Sq Es Agret

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. Lredpfx Asz Eiigjgret The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 Lsdozza Diepfx Agrjrt - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3292010, total width: 1,070 mm, total length: 2,030 mm, total height: 2,320 mm, input voltage: 400 V, ULTRON U-100 ultrasonic cleaner – 30 kW – 400 V – 2011 For sale: ULTRON U-100 industrial ultrasonic cleaner, manufactured in 2011, designed for thorough cleaning and degreasing of industrial components using ultrasonic technology. The machine has an ultrasonic power of 30,000 W and operates on a 400 V power supply. The unit is constructed from stainless steel and features a spacious working chamber with a lid. Additional equipment/modification: The cleaner has been fitted with a custom-made lifting and lowering mechanism for the basket, operated by an actuator, which greatly simplifies the loading and unloading of cleaned components and the operation of the device. Technical data: - Manufacturer: ULTRON - Model: U-100 - Year of manufacture: 2011 - Machine number: 3292010 Lsdpjzza Insfx Agrort - Ultrasonic power: 30,000 W - Power supply voltage: 400 V - Overall dimensions: 2030 × 1070 × 2320 mm - Basket lifting/lowering: by means of an actuator – custom-made - Construction: stainless steel The machine has a robust, industrial design and is suitable for use in production plants, workshops, and for cleaning industrial parts and components. Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2011, - Brand: JLG - Type: 3394RT - Year of construction: 2011 - Weight: 6588 kg. - Hours: 1333 - Working height: 12 meters - Lifting capacity: 905 kg. - 2x Extendable work platform - Drive: Deutz diesel - 4x Outrigger legs - Video on our website - Trade-in and transport possible * Brand: JLG *Type: 3394RT * Construction year: 2011 Ljdoxykxbepfx Agrort * Weight: 6588 kg. * Working height: 12 meters * Lifting capacity: 905 kg. * Drive: Deutz diesel * Hours: 1333

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers Ljdpfxeyudwzo Agrort - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2011, We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) Lrodpfezv S Dwex Agrst - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Offered is a Bizerba FK-32 bone saw band saw, built in 2011. The machine is fully functional. Further details available upon request. Cash or prepayment! Lrsdpfx Aev Npbqjgrjt Sale to businesses only. No guarantee or warranty.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 5,205 h, functionality: fully functional, mileage: 19,572 km, power: 62 kW (84.30 HP), fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, gearing type: hydrostat, suspension: steel, loading space volume: 2 m³, Equipment: ABS, air conditioning, low noise, Alluvial vehicle: - Bucher - CC2020 - Year of construction 2011 - VM engine; 62kw - 19.572KM; 5.205 operating hours - 3,965 flushing KM;.077 flushing hours - Hydrostat (Vmax 20km/h) - Articulated steering - Air conditioning Lodpfx Agst Euxvorsrt - el. FH - Yellow light - Preparation for high-pressure lance at the rear with boom and hose reel - Telescopic spray bar left and right - Side spray nozzles left / right individually controllable - Water pump: General Pump T88; 85l/min; 60bar - Municipal vehicle from 1st hand Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: good (used), Year of construction: 2011, operating hours: 41,800 h, functionality: fully functional, turning length: 550 mm, turning diameter: 280 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 515 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,800 mm, total length: 2,100 mm, total width: 1,350 mm, quill travel distance: 500 mm, quill diameter: 60 mm, quill stroke: 125 mm, type of input current: AC, torque: 121 Nm, overall weight: 4,000 kg, chuck outer diameter: 225 mm, Equipment: documentation/manual, For sale is a TC400 52MC CNC turning machine from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, built in 2011. It is in good used condition, with 41,816 hours of active operating time, of which 15,048 hours represent machining time. The machine has not been in operation for the last 5 years and was serviced by a Spinner technician in July 2025. It features a tool turret with 12 driven tools, an automatic workpiece removal system with a conveyor belt, a chip conveyor, and 4 foot pedals. The technical documentation in German and English, the wiring diagram of the electrical lines, the service manual, the latest maintenance reports, the original invoice, and several supplementary tool brochures are included in their original form. Lrodey Nxd Hspfx Agrjt In addition, various tools are included, which are still functional, some of which have barely been used. Manufacturer: Spinner Werkzeugmaschinenfabrik GmbH Model: TC400 52MC Machine No.: AU0474 Year of manufacture: 2011 Weight: 4,000 kg The detailed technical specifications can be found in the excerpts from the technical documentation in images 2, 3, and 4. The price of the machine includes the machine itself, some tools and accessories, as well as loading onto a truck (a suitable forklift is available). Any shipping or collection must be arranged separately and is not included in the price. The price of the machine is quoted as a net price. If you are interested, please contact us by email, direct message, or by phone. We will gladly send you a current video to demonstrate the machine's functionality upon request. Fitok GmbH, Moritz Hanesch, 07.05.2026, updated 28.05.2026

Condition: used, functionality: fully functional, mileage: 411,800 km, first registration: 09/2011, Year of construction: 2011, IVECO TRAKKER 450 with CIFA concrete mixer First registered: September 21, 2011 – Euro 5 Mileage: 411,800 km Axles: 4 Equipment: CIFA RY1300 – Power Take-Off (PTO) Tires: 60/70% tread Valid inspection certificate Lredpfoz Ep T Eex Agrst Good condition Available immediately WE CONSIDER TRADES OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, KOMATSU.

Condition: used, Year of construction: 2011, Pacton TXD 3 Sliding Curtain Trailer / Sliding Roof / Hard Wood Floor / Lift Axle / 2011 Stainless Steel Toolbox Sliding Roof Hard Wood Floor Lift Axle A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. Ljdszki Agepfx Agrsrt All our deliveries are at trade prices and in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 4,260 h, power: 248.6 kW (338.00 HP), color: green, total height: 4,500 mm, total length: 8,500 mm, total width: 3,700 mm, 2011 | John Deere 9670 STS | Used Combine Harvester | 4,260 hours Location: Michigan, United States Shipping available to your destination. Shipping rates can be calculated instantly. About this machine: Rotary combine harvester with a 338 hp diesel engine, 10,572 L grain tank, 22.5 ft unloading auger, extended wear round bar concaves, extended separator package, and Sidehill Performance Package. Equipped with duals and a high-torque variable-speed feederhouse drive. ✔ 2WD ✔ 520/85R38 duals ✔ 18.4 x 30 tires ✔ High-torque variable-speed feederhouse drive ✔ Extended wear round bar concaves ✔ Extended separator package ✔ Deep tooth adjustment ✔ 22.5 ft unloading auger ✔ Sidehill Performance Package ✔ Chopper ✔ Duals Key specs: Engine power: 338 hp Engine hours: 4,260 hr Operating weight: 14,815 kg (32,661.5 lb) Grain tank capacity: 10,572 L (300 bu) Unloading rate: 116 L/sec (3.3 bu/sec) Unloading auger length: 6.9 m (22.5 ft) Fuel tank: 946 L Engine displacement: 9.0 L Emission standard: Tier 3 Combine type: Corn/Bean Separator type: Rotary Chaffer area: 1.9 m² Sieve area: 1.6 m² What buyers get with us: ✔ No buyer fees ✔ Verified sellers ✔ Make offer ✔ Instant shipping rates without registration ✔ Pre-sale inspection ✔ Documentation support Lrsdpfxjz Ekpzo Agrjt ✔ Secure transaction on every purchase

Condition: good (used), Year of construction: 2011, operating hours: 9,026 h, Still RX70-35 Triplo 500 Freelift / Sideshift / 4th function / Diesel 2011 / 9030 hours Lodjzypuhjpfx Agrert A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance; we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2011, Perfect binding line Müller Martini Acoro A6 (3026-20) Year: 2011 Consisting of Gathering machine Müller Martini 1571 Year: 2011 - 2016 Description: - Hand feeding station - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition: ASIR III - ASAC automatic self adjusting calliper - Pump(s) - Set up element - Reject gate for incomplete products: 3715 - Transfer into the binder Perfect binder Müller Martini Acoro A6 (3026-20) Year: 2011 Description: - Semi automatic setting - Colour monitor with touch screen - Book Data Center: BDC - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS-A C80 - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: MOD 40 Pot - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS C18 - Gauzing station - Drum cover feeder - Scoring station: 4 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Müller Martini 3520 Year: 2011 - 2016 Description: - Transport system, length (approx): 40 mtr - Escape delivery Three knife trimmer Müller Martini Merit-S Year: 2004 Description: - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Müller Martini UNO Year: 2011 Description: - Delivery to the right - Roller table delivery on the left Muller Martini Acoro A6: . Max. mechanical speed: 6.000 cycles/h Maximum size range: 430 x 320 x 60 mm Minimum size range: 140 x 100 x 2 mm Muller Martini Merit S: . Max. mechanical speed: up to 4.000 cycles/h Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 304 x 310 mm Minimum size (cutted): 136 x 100 mm Book thickness (min): 2 - 80 mm Muller Martini Uno: . Max. mechanical speed: up to 6.000 cycles/h Maximum size range: 500 x 320 x 80 mm Minimum size range: 140 x 100 x 2 mm Lodezzki Nspfx Agrert Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Lsdpozzairofx Agrsrt Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: S16W80-11-4, load capacity: 20 kg, arm reach: 1,717 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, teach pendant model: JZRCR-YPP01-1, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.06 mm, For sale is a Yaskawa Motoman HP20D 6-axis industrial robot with DX100 controller, teach pendant, connection cables, and a customer-specific pneumatic gripper/handling device. Technical data and specifications: - Model: Motoman HP20D - Robot type: YR-HP0020D-B00 Lredez Ebn Uopfx Agrjt - Year of manufacture: 07/2011 - Serial/order number: S16W80-11-4 - Axes: 6 - Payload: 20 kg - Horizontal reach: 1,717 mm - Repeatability: ±0.06 mm - Robot weight: 268 kg - Maximum pneumatic pressure: 490 kPa - Controller: Yaskawa DX100 - Controller type: ERDS-HP0020D-E02 - Power supply: 400/415/440 V, 3-phase, 50/60 Hz - Average connected power: 2.0 kVA - Full load current: 5.8 A - Teach pendant: JZRCR-YPP01-1 Visible scope of supply according to the images: - Robot arm on welded steel base - DX100 control cabinet - Teach pendant - Robot, operator device, and connection cables with CEE plug - Customer-specific pneumatic gripper/handling device Used condition with paint chips, scratches, and dirt. The robot has not been re-tested for functionality after disassembly; therefore, it is sold as untested. The function and suitability of the customer-specific gripper device have not been tested. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. Transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Equipment: documentation/manual, Frasch FA_LH700 (2011) - Lrodpfxjzht Nrs Agrjt Dimensions (m): 2,6x0,51x1,35 (LxWxH)

Condition: used, Year of construction: 2011, Colour: White Weight: 7.500 kg Price: On request - Year: 2011 - Documentation available: Yes - CE certificate present: No - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 Ljdpfx Agezmvawsrort - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR300 5AX. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, Renishaw probing, 30 Station ATC, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 410 mm, Y Axis 610 mm, Z Axis 500 mm A Axis +30° to -120°, C Axis Continuous 360° TABLE: Diameter 300 mm Max Swing Diameter 300 mm, Max Weight on Table (evenly distributed) 100 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 FEEDRATES: Rapid and Jog (Max.) 36 m/min Cutting Feed Rate (Max.) 20 m/min Rotary Axis Speed 25 rpm BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Through Spindle Coolant Coolant Flow Rate at Cutter 160 L/min Through Spindle Coolant Pressure 20 bar (Std) Washdown 140 L/min Lrjdpfx Agszzax Toret GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X410 Y610 Z610 mm A360| 12000RPM | BT40 Accessories: 5 axis Table, Renishaw Probing, Side Mount Tool Changer, Swarf conveyor

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: S0M467-1-1, load capacity: 50 kg, arm reach: 2,061 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, teach pendant model: JZRCR-YPP01-1, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.07 mm, For sale is a Yaskawa Motoman MH50 6-axis industrial robot with DX100 controller, teach pendant, connection cables, a large custom gripper, and an additional THEIS control cabinet. Technical data and specifications: - Model: Motoman MH50 - Robot type: YR-MH00050-D00 - Year of manufacture: 05/2011 - Robot serial/order number: S0M467-1-1 - Axes: 6 - Payload: 50 kg - Reach: 2,061 mm - Repeatability: ±0.07 mm - Robot mass according to nameplate: 555 kg - Maximum pneumatic pressure: 490 kPa - Controller: Yaskawa DX100 - Controller type: ERDR-MH00050-E02 - Controller serial number: S0M467-2-1-0 - Power supply: 400 V, 3-phase, 50/60 Hz - Average connection power: 4.0 kVA - Full-load current: 11.5 A - Teach pendant: JZRCR-YPP01-1, S/N A030333, date 03/2012 Lrjdpfxjz Ebpfe Agret Visible scope of delivery according to the images: - Robot arm on pallet - DX100 controller cabinet - Teach pendant - Connection cables - Custom gripper - Additional THEIS control cabinet No. 3353 with Siemens S7-200 components Used condition with visible signs of wear. The gripper shows significant scratches; there are slight traces of corrosion on the base ring and metal parts. The robot, the gripper, and the additional THEIS control cabinet have not been re-tested for functionality after disassembly; therefore, they are sold as untested. Scope of delivery according to the images. Note regarding assignment: The robot has the order/serial number S0M467-1-1, and the DX100 controller has the order number S0M467-2-1. The technical assignment or compatibility of these components shown together has not been checked after disassembly and will not be guaranteed before the sale. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior arrangement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 Lrjdpfjxur E Sox Agrjt - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Lredpfx Agjzkbr Tjrot Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Clamping force: 8,500 kN / 850 t Control system: MC5 Closing system: hydraulic-mechanical, twin-platen Robot: KraussMaffei LRX 500 Robot Z-axis: 4,000 mm Robot X-axis: 1,500 mm Robot Y-axis: 1,250 / 1,250 mm Closing unit: twin-platen hydraulic-mechanical system with 4 pressure pads and 4 locking units on the moving platen Mold closing force: 8,500 kN Mold opening force: 560 kN Ledpfx Agoz Eh U Ujrjrt Dimensions of mounting platens (H × V): 1,600 × 1,600 mm Distance between columns (H × V): 1,140 × 1,140 mm Mold opening stroke: 1,600 mm Minimum mold height: 500 mm Maximum mold height: 1,100 mm Maximum clearance / opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 / 100 kN Injection unit: 12000 Injection unit adjustment: PV Plasticizing system: complete system for processing thermoplastics Screw diameter: 135 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle orifice diameter: 9 mm Maximum injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight for PS: 6,098 g Injection rate: 1,414 cm³/s Rated power of pump motor: 132 kW Dry cycle time according to EUROMAP 6: 965 1/h Oil tank capacity: 2,440 l MC5 control system: color monitor, integrated control panel, USB port/data storage Net weight including control cabinet: approx. 49 t Machine dimensions / footprint (L × W × H): 11.72 × 2.92 × 2.71 m Additional equipment: KraussMaffei LRX 500 linear robot

Condition: good (used), Year of construction: 2011, functionality: fully functional, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, For sale is a HOMAG BMG 311 Venture 316 L CNC machining center, manufactured in 2011. The machine is currently still in operation and can be inspected and tested under power until it becomes available in November 2026. A video of the machine in operation is available; see the advertisement or YouTube. Equipment: * HOMAG BMG 311 Venture 316 L * Year of manufacture: 2011 * Control system / software: WoodWOP 6.1 * Tooling on the machine included * Vacuum pump included * Currently under power and operational * Inspection and test run possible until November 2026 The machine is suitable for professional CNC machining of wood-based materials and, due to its extensive equipment, is immediately ready for continued use in production. A detailed function test on-site is possible by arrangement. Availability: from November 2026 If you have any questions about the machine, require further technical data, additional images, or would like to arrange an inspection, please do not hesitate to contact us. Contact person: Dennis Bitzigeio Company: BIMA Maschinen & Zubehör Ljdpfez Ek Htjx Agrsrt