Used Koch-Technik Tma8 for sale (7,064)

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing Ksdpfx Aoym Ihhjgpodl * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches * Folding front wall * Loading height 550 mm Errors and prior sale reserved

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, Gross vehicle weight: 1,300 kg, high loader trailer, with overrun brake, 100 km/h, rear tipper, equipped with BAST-Ing PumpFast cordless drill pump. Errors and prior sale excepted. Kjdpfsym Ig Rox Agpedl

Condition: used, maximum load weight: 3,150 kg, overall weight: 4,500 kg, axle configuration: 2 axles, first registration: 04/2003, Equipment: ABS, Unsinn trailer Absetzipper telescopic. Equipped with a separate Briggs & Stratton 9 HP petrol engine. Features electric starter and manual pull-start, cable remote control, and a galvanized lid trough. Galvanized body, loading area 2.46 x 1.46 m. Also suitable for mini excavators, ABS, support wheel, 2 hydraulic rear supports, AL-KO axles, DUO Matik, adjustable drawbar. === German registration === ==1 owner==. Net price: 7,800 EUR..... ===== Daily purchase of commercial vehicles, trade-in possible ===== Ksdpfx Asy Hncasgpodl

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm Kdsdpsy Nkmmsfx Agpsl No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, maximum load weight: 574 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,600 mm, loading space width: 1,550 mm, loading space height: 145 mm, total width: 2,047 mm, total height: 905 mm, A33 GW26N0158435 Lowering motorcycle trailer by Unsinn, model UA 2615-7-13, GVW 750 kg, lowerable, 1x centrally mounted airline rail, 100 km/h. Ksdpfx Ageymvalepodl Vehicle not prepared/conditioned. Errors and prior sale excepted.

Condition: new, Falke Technik Compressor Model: FKTG 5.5P COMBO Dryer, Automatic condensate drain, Tank: 500 litres, Kjdpfxsy H Ipys Agpsdl Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 420 kg.

Condition: used, Year of construction: 2019, Overview This keg handling package consists of a M+F Keg Technik Monomat + RMT keg washing system, a keg filling unit, and a large quantity of stainless steel kegs in various sizes, complemented by beer taps. The system is suitable for small to medium-scale brewery operations, enabling cleaning and filling of kegs for beer distribution. The washer was manufactured in 2019 and offers a compact and efficient solution for keg processing. Technical data Keg washer manufacturer: M+F Keg Technik Keg washer model: Monomat + RMT Year of manufacture: 2019 Capacity: approx. 12 kegs/hour Keg filler: Included (manufacturer unknown) System type: Semi-automatic keg washing and filling setup Equipment Keg Technik Monomat + RMT keg washer Keg filling system (standalone unit) 195 x 30 L stainless steel kegs (Type S/A) 39 x 50 L stainless steel kegs (Type S) 22 x 20 L stainless steel kegs (Type A) 22 x 10 L stainless steel kegs (Type S) 10 x beer taps (various manufacturers) Kdodpfx Agey D Ertjpel

Condition: used, Year of construction: 1997, TRIO-Technik belt conveyor GF 2530-940-840 RA1962 Technical data: Conveyor length (NL): 2530 mm stand width (NB): 940 mm Belt width (GuB): 840 mm Overall height (BH): 85 mm Kodpfxek Abncs Agpjdl Adjusted height: 630 mm Support feet: 2 pieces Conveying speed (v m/s): 0,078 Electrical data: 50Hz V380-500, kW 0,18 / S1 Belt: Green, smooth Year of manufacture: 10/1997 Optionally available: Frequency converter For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KGYour specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Kdjdpfx Agjy Eg Dyopel

Condition: used, Year of construction: 2013, machine/vehicle number: 22640M03, For sale: a powerful stationary spot welding machine / resistance welding system from the renowned manufacturer AWL-Techniek. This system is ideally suited for industrial applications, series production, and use in automated production lines and robotic cells. With a high output of 130 kVA, the machine is optimally designed for demanding welding processes in the metal sector. Technical data: Manufacturer: AWL-Techniek Model: BR453K2B Year of manufacture: 2013 Voltage: 400 V Frequency: 50 Hz Phase: 3P + PEN Current: 250 A Power: 130 kVA Weight: approx. 500 kg Equipment: - Stationary spot welding system - Welding tongs with copper electrodes - Rotary table / workpiece holder - Control unit with operator panel - Pneumatic pressure unit - Industrial-grade (heavy duty) design Applications: - Automotive industry - Metal processing - Series production - Robotic welding / automation lines Kodpfxjy Erp Us Agpedl - Sheet metal processing

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Kdjdpeyk Ea Aofx Agpel

Condition: as good as new (ex-display), +++++ We manufacture the original +++++ Non-binding offer. Compact plant LLK 246. copper cable recycling machine Plant for copper cable recycling. -consisting of granulator, conveying blower, separating table, exhaust system. - SPS controlled Ksdpfofb R Ixsx Agpjdl As new or used plant. -ex our factory AGB on our homepage

Condition: new, We offer high-quality Corlett-type warehouse trolleys for internal transport and storage of various types of goods. Dimensions (W × D × H): • 2700 × 1150 × 1900 mm Load capacity: Kdedpfextwzvsx Agpel • approx. 600 kg (depending on the version) Product features: • Trolleys after service (inspected, refurbished, ready for operation) • 1-year warranty on used trolleys • Robust industrial steel design • Nestable trolleys – can be slid into each other to save warehouse space • Ideal for transporting and storing furniture, panel components, and warehouse goods • Very good technical and visual condition Availability: • In stock: 200 units – available for immediate delivery Advantages: • Durable industrial quality • Easy handling and universal application • Space-saving storage • Fast order processing Delivery and services: • Delivery available across all of Europe • VAT invoice / EU VAT • Option to inspect the goods by prior arrangement KAM-KUB Logistic & Trolleys Europe – Your specialist for Corlett-type warehouse trolleys sales and service in Europe.

Condition: used, Year of construction: 2004, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: DRI 04320080, mileage: 100 km, overall weight: 7,000 kg, fuel type: diesel, color: blue, operation weight: 14,000 kg, maximum load weight: 15,000 kg, chain condition: 50 %, bar diameter (max.): 61 mm, pipe diameter (max.): 400 mm, Equipment: cabin, hammer hydraulics, rubber tracks, German horizontal directional drilling rig capable of drilling up to 200 meters in length, with a thrust/pull-back force of 15 tons plus impact (28 tons) with hydraulic hammer. Rubber tracks, max speed 3 km/h. Suitable for trenchless installation of pipes up to diameter 400 mm underground. Drilling depth up to 5 meters with wireless navigation. Manufacturer: TRACTO-TECHNIK GmbH & Co, year 2004, 7,800 operating hours. Main components: - Hydraulic-driven carriage for rods, HATZ 4-cylinder diesel engine, operator cabin - 3 rod containers, each with 48 drill rods x 3 meters = 144 rods (432 meters total) Ksdpfx Agsy H H Uuspjdl Control options: 1. Rod handling manipulator 2. Semi-automatic rod gripper and pulling system Mixing system (8056D) with hydraulic station (TT-M2) DRI 8904.B, Deutz 4-cylinder diesel engine, bentonite pump P-72, two bentonite preparation tanks (each 4,000 liters), two BÖRGER rotary pumps for mixing Connection cable for mixing unit Bentonite hose reel 2 x drill heads Ø110 reamer, 5t swivel Ø280 reamer with swivel, Ø315 with swivel, Ø385 with swivel Eclipse navigation system New spare working components (adapter, shaft, sleeve) Price incl. VAT.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Manufacturer: Wanner Technik GmbH Model: 13.20 Grinding chamber dimensions: 130 x 200 mm Power: 2.2 kW Cascade knife arrangement New knives!!! PRICE REDUCTION FROM 1350 TO 1250 EUR!!! Kdodpfsyz U Ekjx Agpel

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Kdeder Nfvmepfx Agpol Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Kedeyatkbspfx Agpjdl Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2013, MTF TECHNIK (74) conveyor belt, angled, vertical length 1.07 m, horizontal length 1.05 m, belt width 32.5 cm, height 1.02 m (adjustable), crossbar height 2 cm, 2013. NEW BELT Ksdeyzha Ispfx Agpedl

Condition: excellent (used), Year of construction: 2013, MTF TECHNIK conveyor belt (73) Straight, length 1.26 m, belt width 35.5 cm, 2013, Kdjdpeyzhauofx Agpel

Condition: new, Year of construction: 2023, functionality: fully functional, The Z-shaped conveyor belt from Trio Technik is for sale and has the following dimensions: Input: 2600 mm Incline: 1700 mm Output: 500 mm Mobile and adjustable, 300 mm Output height: 1450-1700 mm Constant belt speed: 3 m/min Kedpfowbfxusx Agpsdl Frame height: 200 mm

Year of construction: 2011, condition: excellent (used), functionality: fully functional, The Wanner Technik granulator, type D25.38c, is for sale: Motor power: 4 kW Rotor diameter: Rotor knives: 18 Stator knives: Weight: 410 kg Throughput: 120–200 kg/h Dimensions: Height 1655 mm Width 1120 mm Depth 970 mm Kodpfxeyxw U As Agpodl

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Kdodpeyyyfyjfx Agpel Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: used, Height-adjustable workbench HANDKE Industrial Technology Height-adjustable workstation, work table, electric workbench Table length: 1100 / 1700 mm Table depth: 600 mm Foldable table length: 600 mm Working height: from 830 to 1200 mm - Tabletop coated with melamine resin: 40 mm - Tabletop with hydraulic lift system Kdjdpfxoitv Nve Agpjl - Height adjustment via hydraulic pump with hand crank - Sturdy base frame made of aluminium system profile - Mobile with 4 large castor wheels (swivel castors) - Rear panel with standard square perforation - 1 drawer compartment W x D x H = 675 x 210 x 80 mm - 1 cabinet base unit W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Weight: 90 kg Very good condition, as new 2 units available Price per unit

Condition: good (used), Year of construction: 1992, Travel X-axis: 1500 mm Travel Y-axis: 420 mm travel Z-axis: 400 mm clamping surface: 2 x 700 mm x 420 mm max. table load: 800 kg number of tools: 0 2 x 36 pieces tool holder: SK 40 gr. feed: 25 m/min weight: 9 t Ksdjcph Tmopfx Agpsdl area required: 6,50x4,5x3,1 m small speed: 50 rpm big speed: 7500 rpm stepless rapid traverse: 25000 mm/min control: Siemens Sinumerik 820 M GA 3 + 2 x single axis stepper motor control Sama SFI present clamping system: per place 1 NC dividing head with counter bearing, carrier plate, rotary distributor and hydr. clamping and 4-fold dividing head with rotary distributor in special design and sep. NC control Clamping system: 4-fold dividing head consists of 4 -2 jaw chucks, clamping pressure 12bar Make: Hofmann HMR 4/kombi 294/4 Tool breakage control Meutrsuix ATM B310 Renishaw probe system (without probe) Coolant system with sparger, filter system and fine filter

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, The conveyor belt from MTF is for sale; a new conveyor belt has been installed and it is equipped with a cycle control system. Kdedpfx Agjywhudepel The belt is NEW; Feed length: 1400 mm Incline section: 900 mm Usable width: 350 mm Overall width: 460 mm Mobile (on wheels) Cycle control Belt speed: 3 m/min