Used Krauss Maffei Km125-520C2 for sale (258)

Year of construction: 1996, condition: good (used), Make:KRAUSS-MAFFEI Description: used type: KMD-2-50-KK output capacity: max. approx. 140-180 kg/h for H-PVC pipes, depending on material and product this can vary year of construction:1996 Screw diameter:50-103 mm (conical) Screw length:1300 mm Screw speed: max. 43 m/min. Drive motor: DC motor 25 kW Cylinder heating/cooling zones: 4/3 (oil cooling) inlet piece heating zone: 1 Ijdpfxoh Nmt Do Anweau tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for barrel degassing, barrel cooling unit, screw tempering unit Gearbox, was installed at 53,000 hrs. Overhauled worms and the cylinder Note: current running time is 62,590 hrs. Good Second hand functional

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Iedpfxjy Apdqe Anweau Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 57,752 h, clamping force: 13,000 kN, screw diameter: 105 mm, overall weight: 83,000 kg, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It includes a hydraulic mechanical 2 platen clamping system and a robust motor current of 261 A. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1300-12000 MC machine we have for sale. Contact us for further details. • International size designation: 12000 MC / 1300 • Operating hours: 57,752 hElectrical • Operating voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Motor total current: 245 A • Motor fuse: 315 A • Heating fuse: 250 A • Main switch: 6-pole, heating and power separated • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil cooled pump motor: IP54 • Cabinet cooling fanControl and HMI • MC4 32-bit microprocessor control • TFT color display • 3.5 inch floppy disk driveClamping unit • Hydraulic mechanical 2-platen clamping system • 4 pressure cushions integrated in moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety door on operator side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mmInjection and plasticizing • PV controlled injection unit • Thermoplastic plasticizing unit, wear-resistant design • Non-return valve installed • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticizing possible • Plasticizing unit: SP12000 • Maximum processing temperature: 450°C • Injection embossing control adjustable on screen • Injection stroke control • Holding pressure control Iajdpsyx Ez Rjfx Anwou • Injection speed controlHydraulics, lubrication, cooling • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max 31°C • Cooling water pressure: 4–6 barTemperature control • 8 temperature control circuits for hot runner • Adaptive temperature controllers • Maximum temperature controller power: 2 kW • 230 V temperature controller supplyMonitoring and software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data storage up to 20,000 cycles • Event log protocol • Alarm history • Graphical process curves • Trend graphics for 12 parametersInterfaces and connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • External temperature unit interface 20 mA • Central computer interface • BDE interface with 5 contacts • Potential-free contact for dosing unit

Condition: excellent (used), double pump for Krauss Maffei Maschines Iasdpfx Anjg I Uycjwsu SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978

Year of construction: 2009, condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei MOS 4500-05-2203 Iodpsf N Ixujfx Anwoau

Condition: excellent (used), Pleiger hydraulic motor for Krauss Maffei MO 8000 No. 6257684 Iajdpfxjf Ri D Us Anwou

Year of construction: 2008, operating hours: 3,200 h, condition: ready for operation (used), screw diameter: 60 mm, This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Additional equipment • Hydraulic ejector • Side air valve • Robot interface • 4-zone mold temperature control system Isdjyaizvepfx Anwjau Machine Benefits Technical Machine Benefits • Tie bar spacing: 560 x 560 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,100 kN, total height: 470 mm, product length (max.): 470 mm, This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. • Mold opening force: 70.0 kN • Clamping plate (L x W): 745 x 770 mm • Internal dimensions (L x W): 470 x 470 mm • Mold opening stroke max: 600 mm • Mold installation height min: 300 mm Iodpfxjx D Ea Us Anwsau • Opening width: 900 mm Additional equipment • Robot (included) • Water temperature control equipment (not included) • Conveyor belt (not included)

Year of construction: 2002, condition: ready for operation (used), screw diameter: 40 mm, This Krauss Maffei 150-520 C2 was manufactured in 2002. It features a screw diameter of 40 mm and includes a Sepro robot and a storage conveyor belt from 2014. The machine is operational, with pump operating hours at 50,327 and automatic operating hours at 36,908. Consider the opportunity to buy this Krauss Maffei 150-520 C2 hydraulic injection moulding machine. Contact us for more information about this machine. Iajdpfxox D Hxle Anwju • Pump operating hours: 50,327 • Automatic operating hours: 36,908 • Screw diameter: 40 mm • Condition notes: Machine operational; SGM functional; SR circuit board has an intermittent/loose connection Additional equipment • Robot: Sepro SR Success22 S3 Trans • Operating hours (powered on): 49,267 • Operating hours (automatic): 3,854 • Condition: Fully functional, good used condition • Storage conveyor belt (2014) • Optional: Reinhardt-Technik dosing system LSR 200 LLA (2013)

Condition: good (used), Year of construction: 2005, Krauss Maffei 500-2700 C1 (2005) MC4 controll Clamping force: 500 t Screw diameter: 80 mm Type: Horizontal Drive: Hydraulic Clamping unit: Iaodpfxox H Au Ro Anweu Clamping force: 500 t Opening stroke: 1260 mm Tie bar spacing (H×V): 900×800 mm Platen size (H×V): 1270×1200 mm Injection unit: Screw Ø: 80 mm Max. inj. press.: 1829 bar Inj. vol.: 1433 cm³ Shot weight (PS): 1304 g Electrical equipment: Voltage: 400 V / 50 Hz Sepro Linear robot available Accumulator English, French, Czech language available. Hours: 61000

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- Iasdoqvuicepfx Anwsu 37 cm height-47cm length-8cm

Condition: refurbished (used), overhauled Rexroth double pump for Krauss Maffei SGM machines. Ijdoyithlspfx Anwsau Service, repair and exchange of hydraulic pumps Rexroth, Voith, Bosch, Moog.

Condition: like new (used), Year of construction: 2019, Krauss Maffei Injection Molding Line including a Kraus Maffei Injection Molding Machine, Model 50/55 CX with Krauss Maffei handling unit, Model LRX 100 (serial 2118838); tray unstacking station; discharge blower, collection device and tray filling station; and Kemapack GmbH strapping/wrapping machine. Ijdpfx Ajmn Tu Hsnweau

Condition: used, Krauss Maffei Motherboard Iedpfx Aou Axihenwoau

Condition: new, It is new spare parts never used. Iedpfx Anjygucfjwsau Krauss Maffei MC 5 display M5V121 new never used Was bought for Krauss Maffei 2300 ton machine. M5-Anzeigeeinheit 12Z LxWxH 310x 360x60 mm 3600 g

Condition: reconditioned (used), Year of construction: 2015, Used injection molding machine directly from the manufacturer! We as manufacturer KraussMaffei offer here one of our used injection molding machines. CONTROL - MC4 TECHNICAL DATA CLAMPING UNIT - injection force: kN 5000 - distance between columns (h x v): mm 900 x 800 - distance of mold opening max: mm 1170 - mold installation height min: mm 480 - opening stroke of the clamping platen: mm 1650 - Ejector stroke: mm 250 - Ejector force: kN 95 ( Backward: 48 ) SCREW UNIT - Screw diameter: mm 90 Iasdpenh Rnuefx Anweu - Ratio Ls/D: 20 - Injection pressure: bar 1742 - Injection volume: cm3 1953 - Injection size for PS: g 1777 - Injection capacity: cm3/s 649 - Closing force of the nozzle: kN 115 ELECTRICAL PARAMETERS - capacity of pump motor: kW 90 - heating power: kW 44 WEIGHT AND DIMENSIONS - net weight: t 25,8 - dimensions of the machine (L x W x H): m 7,65 x 2,33 x 2,55 Basically, we deliver this machine in a functioning basic condition. In addition, we as the manufacturer of these systems can offer various add-ons depending on the individual case, such as: - Updates for energy optimization of the machine - Possible connection to digital products from KraussMaffei - Plasticizing conversions - Optional: Organization and arranging of delivery (Not included in the price) - Optional: Installation and commissioning (not included in the price) You will receive from us first-class service as well as the possibility to purchase immediately desired spare parts packages of wear parts in order to ensure a continuous production of your new used machine. Do not hesitate and ask us right away!

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit Iedpfx Anjyfm Ahswsau 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Isdpfjxqx Avox Anwsau Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: excellent (used), Year of construction: 2001, operating hours: 99,000 h, machine/vehicle number: 154855, clamping force: 1,500 kN, screw diameter: 45 mm, The machine comes from a cleanroom environment used in medical technology and is in excellent condition, both visually and technically. Thanks to the prescribed regular maintenance, it has always been carefully maintained. Iedpezdyk Ijfx Anwoau

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg Isdpfx Aewthfujnwjau

Year of construction: 2004, condition: ready for operation (used), For sale is an injection molding machine brand Krauss-Maffei and type 125-520 C2 The machine was in a company that attaches great importance to cleanliness and maintenance Year of manufacture 2004 Pneumatic valve gate 2X Hydraulic core pull 83000 production hours Clamping force of the mold: kN 1500 MC 4 control system with color monitor, integrated control panel 4 additional cylinders 1* D35 /2* D40 / 1* D45 additionally included Prices plus VAT Iaedpfelkbhwex Anwou Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 2000, condition: ready for operation (used), Two injection moulding machines Krauss Maffei are available. 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions X/Y/Z: approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control: MC4, operating hours: approx. 86000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions X/Y/Z: approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control: MC4, operating hours: approx. 82000h. Documentation available. An on-site inspection is possible. Ijdew Emybepfx Anweau

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Iedsw D Rmiepfx Anwsau Operating hours: approx. 63,000 h The machine can be inspected at any time

Condition: like new (used), overall weight: 6,400 kg, maximum load weight: 650 kg, load capacity: 500 kg, Vertical basket bottom discharge reconditioned centrifuge with scraper on inertia plate Iaodpfx Ajrrwdbonwsu Type KM 125 manufactured by KRAUSS MAFFEI. AISI 316L wetted parts. Suspension: Rigid type centrifuge on inertia plate. Lid: with 3 manual opening closures, lid opening by means of a hydraulic piston (includes hydraulic power unit), a flat sight glass, an inclined sight glass, cake scraper, N2 inlet fittings and with washing tube and loading tube connections Transmission: 37 kW ATEX electric motor Securities: pneumatic lid opening safety piston, lid safety piston detector. lid open detector. detector for tachometer on machine and motor (includes connection box)

Condition: used, Year of construction: 2004, Krauss Maffei KM125-390 C2 (Year of manufacture 2004) Clamping force: 125 kN Operating hours: approx. 63,000 h The machine can be inspected at any time Iajdpfx Asxuq R Hsnwou