Used Ksb Etabloc-G 50-200/852.2 for sale (69,899)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Pressure: 200 t Bending length: 3050 mm Distance between uprights: 2550 mm Codpjxb Sugsfx Ahmjhc Ram stroke: 274 mm Control: Cybelec ModEva Pac Approx. machine weight: 17,000 kg Accessories/Equipment: - Control conversion to Cybelec ModEva Pac - 2 bending aids in front of the machine - Fiessler light curtain in front of the machine - Foot switch

Condition: ready for operation (used), Year of construction: 2024, Brand: KSB Type: AU F-150-150-045 GG 109D Year of manufacture: 2024 Csdez Imuljpfx Ahmehc 169.00 m3/h 19.00 m 1473 1/min Condition: new Includes manual

Year of construction: 2001, condition: good (used), 2 units of axially split spiral casing pumps with motor and baseplate. Last application as a turbine. !!! Performance curves as a pump and as a turbine are included as images !!! Manufacturer: KSB Type: Omega 350-360 A Flow rate: 1728 m³/h Head: 32 m Speed: 1450 rpm Year of manufacture: 2001 Csdjd Nqi Ropfx Ahmohc In turbine operation: Motor: VEM G21R 280 S4 Power: 75 kW at approximately 20 meters head and 1600 m³/h Voltage: 400 V In pump operation: Required shaft power: 177 kW Required electric motor: 200 kW NPSH value: 6.9 Efficiency: 85.28% Maximum operating temperature: 140°C Speed sensor: Yes !! Price per unit !!

Condition: good (used), Year of construction: 1988, Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum turning diameter over compound slide: 200 mm Center height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 rpm. Csdpjz Hylbjfx Ahmshc

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm ! Price per unit! Chsdeibwarjpfx Ahmjc

Condition: used, This listing is for the Pipetman Gilson P200 50-200 Yellow Pipette The unit is in full working condition and is ready for immediate useT The PIPETMAN Classic line, the world standard in pipetting, offers a wide range of continuously adjustable air-displacement pipettes suited for aqueous solutions of moderate viscosity and density. The PIPETMAN Classic line is available in eight single channel models covering a range of volumes from 0.2 µL to 10 mL. Chedpfx Ahjxv Dtkjmjc

Condition: good (used), Year of construction: 2004, Demag ergotech sys 50-200 (1992) Cjdpsyyztfefx Ahmehc

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Codpfxsvygh Ne Ahmohc Weight: 3,200 kg Available immediately from stock

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Cedpfxjzz Adfs Ahmohc Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor Csdpoyxtfwsfx Ahmohc no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: ready for operation (used), functionality: fully functional, Urpe M-200 G mortising machine, number of strokes per minute: 40-55-75, adjustable distance from table to ram: 181-525 mm, maximum distance between tool and body: 280 mm, table surface area: 666x280 mm, longitudinal travel of the table: 435 mm, transverse travel: 235 mm, tilting headstock, motor power: 1 hp, estimated weight: 700 kg. Chodpfx Ahjzmp Ibomoc

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Chsdpfx Astxb Avjhmoc

Condition: used, Year of construction: 1998, turning diameter 200 mm Cjdpeyqvygofx Ahmshc turning length 400 mm control Siemens type C 200-4 840 C spindle passage 65 mm Tool changer 2 x14 Pos. live tooling 2x Revoler weight of the machine ca. 4 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1994, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 1,460 rpm, total width: 1,100 mm, total length: 2,300 mm, total height: 2,400 mm, table width: 580 mm, table length: 1,400 mm, overall weight: 2,700 kg, Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Max. drill Ø steel: 50mm Stroke pinole: 110mm Max. distance spindle - table:1165mm Min. distance spindle - table:300mm Floor / table area: 1400 x 580mm Speeds / ranges: 1460Rpm Spindle Taper: 5ISO/Bt/Mk Length: 2300mm Width: 1100mm Cedpfx Ahszvfn Njmohc Height: 2400mm Weight: 2700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, – Austrian manufacture – DTR (technical documentation) included – not repainted – compact design – occupies very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm Chjdpfjw H Rrwsx Ahmsc – workpiece thickness: 10–50 mm – feed speed: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – workpiece support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic glue temperature control: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: – feed plate – tape feeder – guillotine for pre-cutting – glue applicator – 3 pressure rollers – guillotine for front/rear tape cutting – 2 milling units: top/bottom – dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995 Cedoytb Eyspfx Ahmehc

Condition: new, Hello, I would like to offer high-pressure KSB pumps with ABB electric motors. Applications for the pumps: - Chemical industry - Fuel industry - Gas industry - Paper industry I have various models available: - 5 units: MCPK150-125-200 VX LXM - 5 units: MCPK065-040-200 VC EXM - 2 units: MCPK100-065-200 VC LXM - 2 units: MCPK080-050-315 VC EXM The stated price is for 1 complete pump with motor, model MCPK150-125-200 VX LXM. If you are interested in a different pump model, please contact me. Chedpfxozx Upzj Ahmoc

Year of construction: 1992, condition: good (used), Control system upgrade in 2022 to CYBELEC VisiTouch Pac Press force: 200 t Bending length: 3050 mm Frame width: 2550 mm Control system: CYBELEC VisiTouch Pac Ram stroke: 524 mm Machine weight approx.: 17,000 kg Equipment: Chjdoim R N Hopfx Ahmsc - Control system upgrade in 2023 to CYBELEC VisiTouch Pac - Controlled axes: Y1, Y2, X, R, crowning - Hydraulic ram clamping - Hydraulic die clamping - 4-stage pneumatic die adjustment

Condition: used, functionality: fully functional, total width: 966 mm, total length: 1,184 mm, total height: 1,322 mm, empty load weight: 200 kg, input voltage: 380 V, Vertical forming machine Dough weight range: 50 to 1,200 g Maximum output: 1,200 pieces/hour 3 PETP rolling rollers Rolling adjustment via a lever Elongation adjustment via a lever Csdpfx Asz Eh Afehmjhc Side controls on the right-hand side Lucoflex scraper blade Wool or synthetic elongation belt Quick belt change Emergency stop Mobile base with casters Power: 0.75 kW Dimensions: 966 x 1184 x 714/1322 h Weight: 200 kg Used JAC UNIC forming machine – 50 to 1200 g A vertical forming machine for dough processing The JAC UNIC is a vertical forming machine designed for professional bakers to laminate and elongate dough pieces. This configuration allows the various forming steps to be combined in a compact machine, suitable for the organization of a professional bakery. The documentation for the UNIC range indicates a working range of 50 to 1,200 g. The machine uses 3 food-grade PETP rolling rollers to gradually prepare the dough before it passes through the elongation zone. This principle is particularly suitable for forming baguettes, long loaves, and various bread formats. Why this JAC UNIC stands out The main advantage of this forming machine lies in its vertical architecture and the separation of the rolling and elongation adjustments. The large side levers allow the operator to mechanically adjust the dough processing to suit the desired product. In the model presented, the controls are located on the right-hand side. The machine also has a front chute and rests on a mobile base equipped with casters. This arrangement facilitates its positioning in the bakery while maintaining direct access to the adjustments.

Condition: used, twin shaft paddle mixer Codjzxdrrepfx Ahmshc mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Year of construction: 2022, condition: as good as new (ex-display), strand-pelletizer type Alphatec AS-G 200 Rotor width 200 mm ᐳ hard-metall cutting rotor drive 7,5 kW - AC speed frequency controlled Capacity 700 kg/h - depending material specifications More strand-Pelletizers ( ST ) ex stock Wuppertal-Germany available, ask for our most recent stock-list or visit us, you´re welcome Chjdocpg Rqjpfx Ahmoc

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Codpjz Eht Defx Ahmehc Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: good (used), Wolfking SFG 850/200 Grinder Chjdpeucdidofx Ahmsc Manufacturer: Wolfking Power Supply: 22 kW Head: 200 mm Hopper Capacity: 850 liter Capacity: +/- 6.000 kg/hour Machine Dimensions LxWxH: 1.600x1.700x2.100 mm Machine Weight: 1.000 kg.

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Chedpfxeuaq D Ao Ahmjc Max. working thickness: 60 mm

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Cjdpsy A Rbdefx Ahmshc Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Speed: 2,960 rpm