Used Lauda Faulty Recirculation Thermostat for sale (897)

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW Ppsdpfx Aljcmr D Hs Sjr

Condition: used, Warm air oven, circulating air oven, heat chamber, tempering oven Maximum internal temperature: 240°C Internal dimensions (W x D x H): 485 x 485 x 300 mm Power supply: 220 Volt, 50 Hz - Airtight door lock - Connection for overpressure or vacuum with shut-off valve and pressure gauge from -1 bar to +0.6 bar - Inlet or exhaust air valve for the heating chamber - Interior heated up to 240°C, without temperature control. Ppsdpfx Aexciugol Sjr Dimensions (L x W x H): 790 x 670 x 520 mm Weight: approx. 60 kg Good condition

Condition: used, KISS K25, Pilot ONE, Huber, cold bath thermostat Model: KISS K25 Type: Pilot ONE Ppjdpfjur R U Hox Al Sor Condition: Used

Condition: ready for operation (used), Huber Ministat 240 Compact Refrigerated Circulating Thermostat for Laboratory and Industrial Use, SN: 74948/07, used, normal signs of wear, 100% functional, scope of delivery as per photos. Podjx Etu Eopfx Al Sjpr

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 2,400 mm, total height: 1,400 mm, total width: 1,300 mm, Kallfass Shrink Tunnel STANDARD 650 NT Ppodpfjy Ic Hijx Al Ser Universally applicable high-performance shrink tunnel with side-adjustable air flaps and externally adjustable bottom air outlets for precise control of the hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculation system, a tunnel hood with an additional double-chamber system, and significantly enhanced all-round insulation provide energy-efficient operation. Equipped with infinitely variable rod chain conveyor. This tunnel is suitable for use with all shrink films, especially polyethylene (LDPE) or polyolefin films, in medium to high performance ranges. Comprehensive standard features: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Infinitely variable speed adjustment for the rod chain conveyor • Wear-free, contactless temperature control • Energy-saving, highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Air outlet flaps adjustable from outside during operation • Fixed clearance height 200 mm • Adjustable working height • Safety equipment in accordance with EC Directive EN 60204: over-temperature monitoring • Machine design complies with EC Machinery Directive 98/37/EC (CE mark), built to EN/VDE standards and relevant accident prevention regulations for the food and beverage industry (GS test mark) Technical Data of Base Machine: Tunnel passage width: 650 mm Tunnel passage height: 200 mm (fixed) Length of heated tunnel hood: 1400 mm Extended tunnel outfeed: approx. 500 mm Working height, adjustable: 800 - 900 mm Product transport: rod chain conveyor, silicone-coated rods, rod spacing 25 mm, rod diameter 12 mm Transport speed, variable: 6 - 22 m/min Drive: three-phase geared motor 0.37 kW, frequency-controlled Heater blower output: constant Airflow adjustment: sliding dampers underneath and side air flaps, externally adjustable Temperature control: electronic thermostat, switching accuracy ± 0.2°C Control voltage: 24 V DC Power supply: 400 V three-phase current, 50 Hz with protective earth Installed heating capacity: 18 kW (average continuous consumption approx. 40%) Power rating: 20.5 + 11.1 kVA Nominal current at 400 V: 29.6 A in standalone mode Max. total connected load: 45.6 A incl. additional three-phase connection Control cabinet position and operator side: on the left in working direction Paint finish: Kallfass anthracite

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) Podpfxovnuq Io Al Sepr - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 200 kg, REA Jumbo 115 / Jumbo 200, mobile warm air generator (230 V) with separate flue gas duct, mounted oil burner RG 4, pre-installed heating oil filter, radial fan, and plug-ready thermostat interface. Year of manufacture: 2007 - Rated heat input: 115 kW - Air output: 9,000 m³/h - Connection: 230 V - Weight: 200 kg Technical highlights of this series: - Burner hood with oil drip tray - Outlet opening: Ø 600 mm - Pre-fitted for recirculation operation - Shock-protected electrical distribution - Robust construction with large wheels for easy transport, even on rough terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as flue pipes and rain caps are not included in this offer but can be provided on request. Pedoyq Ricjpfx Al Sspr Note: The buyer can arrange collection via a freight forwarder. If you do not have contact with forwarding agents, we are happy to provide addresses or arrange inquiries on your behalf.

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Pjdpfx Ajwb A Hiol Sspr Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, Year of construction: 2023, functionality: fully functional, rotational speed (min.): 870 rpm, volume flow: 23,500 m³/h, type of input current: three-phase, overall weight: 23 kg, inlet: 800 mm, pressing: 180 Pa, input voltage: 380 V, power: 1.1 kW (1.50 HP), bolt circle diameter: 800 mm, input frequency: 50 Hz, NEW! Industrial Axial Fan 800mm dia. 23500m3/h 180pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5pcs in stock Brand: Ziehl Abegg Type: FC080-SDS.6K.V7 Year of manufacture: 2023 - Flow rate (m³/h): 23,500 - Air pressure 170Pa max The range of applications of this Ziehl-Abegg spiral fan is very wide: air extraction, drying, air recirculation, air supply. 3-phase 2-speed motor 1030W/400W, 870/630rpm 400VAC (±10%) Δ/Y 50Hz, 1.65/1.05A, , IP54 - - Frequency: 50/60 Hz - Power supply: 400 V 50Hz IP54 - Connection type: terminal box - Diameter (impeller or turbine): 800 mm - Degree of protection: IP54 - Air flow direction: impeller towards mounting brackets - Air temperature range: -25°C to +55°C - Speed ​​(RPM): 890/650 Pjdpfxoyfv Ige Al Sopr - Current (A): 2.7/1.6 - 7-blade impeller made of galvanized sheet steel - Electrical connection via terminal box - Ball bearings - Overload protection protection via thermostat - Airflow direction: impeller towards mounting bracket - ​​Class F - RoHS compliance: Yes - Mounted: on bearings - Dimensions: 850x850x220 mm - Weight: 23kg

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Ppedpslypy Eofx Al Sjr Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Psdpfx Asx Ihiijl Sopr Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Ppodpjx Ihg Isfx Al Ssr Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total length: 5,500 mm, total height: 2,000 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 400 mm, product width (max.): 650 mm, compressed air connection: 6 bar, film width: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical specifications: Film: Flat film, up to approx. 120 µm Film roll width: max. upper 650 mm, lower 620 mm Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This particularly versatile bundling machine operates with two flat film rolls. Product infeed is fully automatic via an in-line conveyor belt. The sealing system is permanently heated, thermostat-controlled, and therefore maintenance-free. Film rolls are simply placed, and film feeding is motor-driven. Manufacturer: Kallfass GmbH Model: Shrink Tunnel Standard 650 NT Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical specifications: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Ppjdpsxxlhnjfx Al Ser Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 kW Rated current at 400V: 38.5 A in stand-alone operation Powerful, universally applicable shrink tunnel with laterally adjustable air flaps and externally adjustable outlet openings underneath for precise control of hot air flow, ensuring optimal shrink results even with challenging product contours. The recirculating air system, tunnel hood with additional double-chamber system, and significantly improved all-round insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible at our premises by appointment. Function guarantee, no warranty.

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Pjdpfjy H Dlqjx Al Sepr

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Psdpfsyliq Isx Al Sjpr Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Condition: used, - RIS AG Series - Clean water at +1°C - External dimensions (W x D x H): 1500 x 2600 x 2300 mm - Tank volume: 3,000 L - Power: 5 kW - Power supply: 400 V - 3 Ph - 50 Hz - Maneurop refrigeration unit --- Type: Ris AG 30 --- Power: 380 V - 3 Ph - 50 Hz --- Serial number: 1299 Ppsdpfx Ajy Ic D Usl Sor --- Refrigerant: R22 - Pump flow rate (for information): from 4 m³/h at 4.5 bar to 12 m³/h at 3 bar - Store power for peak demand - Allows acceptance of warm return flows at the start of the cycle - Store energy cost-effectively, either by direct expansion or glycol water - Unit can be supplied with or without refrigeration group - Monobloc tank, ready for connection - Polyester tank insulated with polyurethane foam - Stainless steel 316L grid-type heat exchanger - Glycol water heat exchanger at -8°C or with a direct expansion refrigerant - Regulation solenoid valve (glycol water version) or thermostatic expansion valve (direct expansion version) - Chilled water distribution pump with safety by-pass, flow regulating valve and pressure gauge - Agitators - Drain valve, overflow - Automatic water make-up - Return loop standby - Service hatches - Power and operation management electrical cabinet Overhauled equipment: units are serviced and prepared to order; delivery and collection times are arranged at the time of order (please request a price quote after overhauling).

Condition: used, General Overview Pasteurising, cooling, chilling, curing, emulsifying, reconstituting, incubating and mixing are all processes essential in the food processing laboratory. The Armfield Multi-Purpose Processing Vessel is capable of carrying out all of these functions as a self-contained,mobile unit. Its mobility allows it to be positioned in the laboratory adjacent to other equipment that it may be acting as a service to, and also makes it easily stowable. The hygienically designed jacketed vessel has a working capacity of between 10 and 15 litres which allows experimentation and demonstrations without the need for large quantities of raw materials. An electrical heating element positioned at the base of the jacket heats water in the jacket which in turn heats the contents of the vessel. This method gives a gentle transfer of heat to ingredients that are often heat sensitive and local 'hot spots' are avoided due to the convective distribution of the heat. Cooling is accomplished by simply metering water from a domestic supply through the jacket. Chilling involves the circulation of chilled water in a closed circuit through an ice bank circulator incorporated in the base of the unit. An emulsifier having a variable speed drive and several options of emulsor head can be Ppsdpfoydh Agsx Al Sjr lowered into the process fluid. Hands-on experience can be gained by students and full instrumentation allows a complete record of the process to be compiled. An automatic valve changeover system enables uncomplicated operation requiring the student/trainee to simply select the particular process required rather than have to operate an array of manual valves. Description Where necessary, refer to the drawings in Equipment Diagrams section 8. 9.1 Overview The stainless steel jacketed vessel (1) has a polished, hygienic finish and a working capacity of between 10 and 15 litres. Its contents are heated indirectly by cartridge heater (16) in the base of the jacket. The heater is protected from over-temperature by a thermostat (17) adjacent to it. An emulsifier (2) can be lowered into or raised out of the vessel using the locking handle (5). The on/off and variable speed control (14) of this unit are situated on the motor housing and not on the control console. A green running light (7) indicates when the emulsor motor is switched on. The emulsor head (3) can easily be interchanged with any of the alternatives supplied by simply removing the finger-nuts securing the head to the drive shaft. A lid (6) is provided to prevent any airborne contamination during long periods of heat treatment. Chilled water is circulated from an ice bank unit (12) situated beneath the processing vessel. After a period of time required to build up an ice bank, this will provide chilled water to the vessel jacket, cooling the contents to a temperature suitable for storage/curing. The ice bank is usually used after an initial rapid cooling by circulating cold water from a domestic supply. 3-way valves (10) and (11) are used to automatically select either open circuit domestic supply cooling or closed circuit chilled water cooling. In both cases the water passes through a flowmeter (13) where the flow rate can be adjusted manually by control valve (14). From the flowmeter, the water enters the base of the vessel jacket after passing through an in-line non-return valve (15). The water leaves the jacket diagonally opposite the inlet, at the top of the vessel. A pressure relief valve is incorpor...

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat Pjdpfx Alsy H Hyke Sjpr

Condition: used, mileage: 200 km, power: 100 kW (135.96 HP), first registration: 01/2026, fuel type: diesel, fuel: diesel, color: white, emission class: euro6, Year of construction: 2025, Equipment: ABS, UVV, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, ON-BOARD COMPUTER, drive type: all-wheel drive, soot particle filter, windshield wipers with rain sensor, central locking with remote control, heated windshield, sliding door for loading/passenger compartment on the right, tire pressure monitoring system, low emissions according to the Euro 6d emissions standard, load compartment partition without windows, automatic door locking, Power KeyFree start function, audio system: digital radio reception (DAB / DAB +) with 13 multifunction display and SYNC 4, Ford SYNC 4 with AppLink and touchscreen, metal load compartment partition, low emissions according to the Euro 6e emissions standard, electric front windows with quick-down / quick-up control on the driver / passenger side, second key with remote control that can be folded down, induction charging cradle for mobile devices, door unlocking (2 stages) including locking by slamming the door, spare wheel as an emergency wheel, exterior mirrors that can be folded down electrically, anti-lock braking system (ABS), exterior mirrors that can be folded down electrically. adjustable and heated, electric windows, USB interface, traction control, driver's seat armrest, A-pillar grab handle, automatic (8-speed), hill start assist, indicator light integrated in exterior mirror, rubber floor covering in the driver's cab, brake assist, electronic. Stability program, wrong-way driver warning function, electric parking brake, FordPass Connect including eCall, lockable glove compartment, rear wing doors (opening angle 90 degrees), heating with recirculation, intelligent acceleration control, body/structure: box, automatic climate control, fuel tank: 70 liters, LED cargo area light, truck registration, engine: 2.0 liters - 100 kW EcoBlue CAT, fatigue warning, emergency call system, pre-collision system, headlights with automatic dimming, rear mud flaps, front mud flaps, seats in the driver's cab: heated driver and front passenger seats, seats in the driver's cab: driver's seat with lumbar support, seat package 11A: driver's seat (4-way adjustable) - passenger double seat, fabric, lane departure warning system, lane change warning system, start/stop system... Subject to changes, prior sale and errors. Pjdpfx Aoyk Rm Usl Sepr

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees Ppedpfxjv I Akvo Al Ser - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. Pedpfeywd I Tox Al Sjpr - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, mileage: 199,850 km, power: 150 kW (203.94 HP), fuel type: diesel, gearing type: automatic, first registration: 08/2018, next inspection (TÜV): 02/2027, emission class: euro6, number of seats: 7, Equipment: ABS, air conditioning, all wheel drive, central locking, navigation system, soot filter, * Highline * 4Motion all-wheel drive * Electric sliding sunroof Pjdpfx Alsycz R Is Sepr * LED headlights * Leather / Alcantara seats * "3-Zone" automatic climate control * Park Distance Control (PDC), front and rear, with rearview camera * Navigation system "Discover Media Plus" * 7 seats * Two electric sliding doors * DSG 7-speed gearbox * Heated seats * Lane change assist "Side Assist" * DYNAUDIO digital sound system * Electric tailgate * Multifunction table with separate guide rails in the floor * Comfort headliner in the driver’s cab and recirculation headliner with roof vents in the passenger compartment * 3-seater bench with sleeping function and storage compartment, sliding, in the 3rd row * 2 swiveling seats with armrests, sliding, in the 2nd row * Comfort seats with armrests and lumbar support * Detachable tow bar * Sliding windows in the sliding doors * Sun blinds for the passenger compartment * Leather multifunction steering wheel with shift paddles * Power windows * Electrically adjustable, heated, and power-folding exterior mirrors * Fog lights * Trailer stabilization * Wi-Fi interface * Daytime running lights * Premium multifunction display with color screen * Decorative inserts * Media App Connect Comfort * 2x USB ports and AUX-IN socket * Rain sensor * Light sensor * Start / Stop system * Cruise control * Tinted glass * Privacy glass at the rear * High beam assist "Light Assist" * Hill start and descend assist * DAB+ radio * On-board computer * Child safety anchorage "ISOFIX" * 17" alloy wheels (winter) * 18" alloy wheels (summer) * EURO 6b * ESP * ASR * Adaptive chassis control DCC with dynamic suspension * Adaptive cruise control ACC * Remote central locking with 2 keys * Full service history with VW * Last service at 198,775 km on 29.12.2025 Vehicle number: 132 Whatsapp No.: Further vehicle offers can be found at: ONLINE CONSULTATION / ONLINE VIEWING / ONLINE PURCHASE CONTRACT / TRADE-IN OF YOUR USED CAR OR TRUCK / DELIVERY AT EXTRA COST Delivery service on request Foreign customers have the option to make a partial payment and collect the vehicle at a later date. NET EXPORT possible (for vehicles with VAT deductible). We are happy to handle your vehicle registration (Düsseldorf), as well as create customs/export or transfer license plates (5-day). Complete export processing possible (export declaration). Vehicles with TÜV used car appraisal available. On request, we are pleased to offer our GPG used car warranty with individual solutions tailored specifically for you and your vehicle. Trade-in possible. For further questions, we are happy to assist you by phone. Opening hours: Monday - Thursday 09:00 - 16:30, Friday 09:00 - 16:00. Subject to changes, errors, and prior sale. Offers are non-binding. All information without guarantee.

Condition: ready for operation (used), Year of construction: 2003, functionality: unexamined, total length: 1,800 mm, total height: 1,400 mm, total width: 1,000 mm, KALLFASS Shrink Tunnel COMPACT 450 SO (Used machine, year of manufacture 2003; sold as is, where is) On consignment from customer Description: Compact and economical shrink tunnel featuring the patented ring nozzle heating system with highly effective air flow regulation. Equipped with infinitely variable rod chain conveyor. The rotatable rod device prevents undesirable marks on the bottom of the packaged goods when using technical films such as Clysar ®, Cryovac ®, and others. This tunnel is particularly suited for shrinking small to medium format products with moderate throughput requirements. Comprehensive standard equipment includes: • Silicone-coated transport rods, rod spacing 25 mm, rod diameter 12 mm • Optional device for rotating transport rods • Infinitely variable speed control for the rod chain conveyor • Infinitely variable tunnel fan power, adjustable according to film quality • Energy-saving 2-stage heating system with highly effective thermal insulation of the tunnel hood • Temperature control via electronic thermostat • Adjustable tunnel clearance height • Adjustable working height Psdpjy Ic Akjfx Al Sspr Technical data: Tunnel passage width: 450 mm Tunnel passage height, adjustable: 100 - 400 mm Length of heated tunnel hood: 1,400 mm Working height, adjustable: 800 - 900 mm Conveyor speed, variable: 2.5 - 12 m/min Drive: AC motor 0.25 kW Airflow regulation: Patented ring nozzle system Temperature control: Electronic thermostat Power supply: 400 Volt three-phase, 50 Hz with protective earth Installed heating capacity, 2-stage switchable: 9 + 4.5 kW (continuous operation consumption approx. 40%) Rated power: 24 kW Rated current: 36.0 A Control cabinet position and operator side: Left, in direction of operation Finish: Kallfass anthracite Additional equipment: • 300 mm cooling station with ball-bearing mounted aluminium rollers at the tunnel outlet • Special cooling fan mounted above the tunnel outlet

Condition: used, Year of construction: 2008, functionality: unexamined, Beck Packautomaten Bundle Packer KV 540 on Year of Manufacture: 2002 Infeed and outfeed conveyor belts, each 2x 200mm belt width Clearance height: max. 250mm Sealing width: max. 540mm Product length: max. 340mm BECK shrink bundling machine with automatic product feed Collective packer type KV 540 HP - online Used machine: Year 2002 Ideal shrink bundling machine suitable for all company sizes. Bundling machine and shrink tunnel form a compact, space-saving unit. Versatile and mobile, can be used at various packing stations. max. sealing width: 540 mm max. product height: 250 mm max. product length: 340 mm Conveyor bar spacing: 38 mm (every 4th rivet fitted) Operating principle The KV 540 HP online easily processes all thermoplastic shrink films such as polyethylene, PVC and polypropylene, whether clear or printed. The system operates with two film rolls at once (upper and lower film). The machine is equipped with a photoelectric control and automatically adjusts the work cycle according to the product length. The product is fed into the machine either manually or automatically via product-specific feeding devices using the infeed conveyor belt, which triggers the closing of the sealing tools. Sealing is done with a continuously heated cutting and sealing blade. A precisely and steplessly adjustable temperature control of the sealing tools prevents unpleasant odours. The advanced film guiding system allows for packaging of items with varying heights and lengths in any sequence without machine adjustments. An integrated shrink tunnel attached to the bundling machine receives the loosely sealed products by means of an outfeed conveyor belt and shrinks the package tightly around the goods with precisely controlled hot air. Ppsdpfx Aljy Ichas Sor Operating speed The machine’s hourly throughput in continuous operation is up to 1,000 packs, depending on the article size and feeding type. Standard Features - Pneumatically driven sealing blade - Film guidance for packaging products of different heights without machine changeover - Safety interlock with simultaneous product protection - Simple, adjustable electrics for sealing and shrink process - Thermostat-controlled shrink tunnel with various heat settings and continuously adjustable conveyor speed The machine meets VDE and safety regulations. Product transport: automatic via conveyor infeed and outfeed Power supply: 380 V three-phase, 50 Hz Power rating: 14 kW Heating capacity: adjustable from 4 - 12 kW Colour: Hammer finish, light grey Additional equipment - Hold-down device above the outfeed conveyor belts - Film pressure rollers at tunnel exit

Condition: used, Year of construction: 2019, 2019 | Volvo FMX500 (Quarry Truck) | Used Articulated Dump Truck 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 159500 or Make an Offer. Ppodpfoytnt Rsx Al Ssr Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 45 inspection points 36 approved ✅ 6 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Could not start the engine due to hydraulic faulty, so a visual inspection only. Could not test engine and cab could not open faulty lever. It will be repaired before it's sold. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39829 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.