Used Linear Freezing Tunnel for sale (4,030)

Condition: excellent (used), Cryovac model ST98 electrically heated hot water shrink tunnel. variable speed conveyor. max product width 550mm. water temp 87 degrees c. Bdedezp N Rbspfx Afweg

Condition: excellent (used), Ulma HRX-400 heat tunnel. Bdsdpfeywi E Rjx Afwsg

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Bdedszwxu Sspfx Afweg Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Swiss-type cnc lathe DMG MORI SPRINT 20/8 LINEAR Bdodpfx Afozxildswog

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Bedpszxch Sefx Afwjdg Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Bdsdpfszwdczox Afwog Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm

Condition: excellent (used), Industrial Linear Cooker – Stainless Steel Industrial linear cooker made of stainless steel, designed for the continuous cooking and heat treatment of food products within industrial processing lines. Bdodpfxjzxcazs Afwsg The equipment allows for continuous and controlled heat treatment while the product moves through the processing zone, facilitating uniform production and integration with the different stages of an automated line. Its stainless steel construction, continuous transport system, and industrial design make it particularly suitable for processing plants for vegetables, fruits, and other food products. MAIN FEATURES -Type: Industrial linear cooker -Application: continuous cooking/heat treatment -Continuous processing system -Automatic product transport -Stainless steel construction -Product feeding zone -Heat treatment section -Continuous discharge -Motorized transport system -Integrated control panel -Hygienic design for the food industry -Robust construction for industrial use -Integrable into existing processing lines -Designed for continuous operation PROCESS The linear cooker is designed to perform continuous heat treatment of the product, eliminating the need to work in batch processes. The product is introduced into the equipment and advances in a controlled manner through the cooking zone, remaining for the established time to receive the required heat treatment. Subsequently, it is continuously discharged to the next stage of the process. It can be integrated with: Feeding systems Washers Peelers and cutters Conveyors and elevators Scalders Cooling systems Inspection belts Freezing equipment Fillers and packers Complete processing lines APPLICATIONS Particularly suitable for the fruit and vegetable processing industry, canning companies, frozen food manufacturers, and prepared food plants that require a continuous cooking or heat treatment system. Depending on its configuration and process conditions, it can be used for vegetables, legumes, fruits, and other food products that require a cooking or heat treatment stage before subsequent cooling, freezing, preservation, or packaging. Its continuous linear processing and stainless steel construction provide a robust solution for automated industrial lines for heat treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, suitable for nitrogen all stainless steel Bjdpfx Aezv Rnhjfwedg belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: excellent (used), Year of construction: 2019, EPS 1050 UV TUNNEL: Maximum sheet size: 1050x780 Maximum stack height: 800 Maximum conveyor speed: 45 m/min. Operating pressure: 6 bar Air consumption: 4 m3/h Bdedpfjzxrdiex Afweg Maximum power consumption: 20 kW Operating power: 7.5 kW Weight: 950 kg Dimensions: 4250x1700x1100

Condition: used, Year of construction: 2006, Milling machines Travel distance X: 500 mm Travel distance Y :450 mm Travel distance Z: 400 mm Bdjdpfxszwqvho Afwjg Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 table size X: 500 mm table size Y: 380 mm tool changer: 30 - time control Heidenhain Machining center - Universal Rotary table (B / C axis) Swivel milling head (B axis) HSK63 tool holder Cooling unit Rotary table: C-axis +/-360°, B-axis 108° Max. table load: approx. 500 kg Speed range - main spindle: 20 - 18,000 rpm Feed rates: 20 - 50,000 mm/min Machine weight approx.: 6.0 tons Machine dimensions approx.: 3.8 x 3.2 x 2.5 meters

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm Bjdpfx Ajwlvi Ejfwjdg z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t dimensions of machine L x W x H 3,67 x 2,25 x 2,91 m = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Bdedpfx Asxd Thmjfweg Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork Bdedpjzvwpfsfx Afwjg washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: ready for operation (used), We have a BECK HV600 shrinktunnel available. This machine is ready and is working like new! Bdodpfx Afehcdhljwjg The measurements are in the pictures.

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Bdodpjht Hllofx Afwjg

Condition: used, Year of construction: 2003, Technical details: x-travel: 3600 mm y-travel: 900 mm z-travel: 820 mm b-axis: -100 - +100 ° control: Siemens 840 D tool changer with: 30 Plätze rapid traverse:: 100 m/min rapid traverse:: 60 m/min. table-size: 4200 x 900 mm table load capacity: 4200 kg total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 4,6 x 8,7 x 3,3 m The DECKEL MAHO DMF 360 Linear is a highly dynamic 5-axis travelling-column machining center designed for the complete machining of large and heavy workpieces. Thanks to the linear drive in the X-axis, the machine achieves very high rapid traverse speeds and reduced non-productive times, making it particularly suitable for toolmaking, mold making, and general mechanical engineering. Travelling-column design for high stability when machining long workpieces Linear drive in the X-axis with rapid traverse speeds up to 100 m/min 5-axis machining with NC swivelling milling head (B-axis) Bjdpfszi Nc Rjx Afwjdg Large travels for machining components longer than 4 meters High precision through direct measuring systems and thermally symmetrical machine design *

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m Bsdpfxepvuyro Afwsdg 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, OMNIFLO Overhead conveyor system Linear guide Transport Schönenberger Complete system for hanging goods RA1994 Manufacturer: Schönenberger Various components available: Straight sections can be optionally shortened: 1 pcs. x 1.00m 1 pcs. x 1.18m 1 pcs. x 1.52m 1 pcs. x 1.54m 1 pcs. x 1.54m 1 pcs. x 1.74m 6 pcs. x 1.80m 1 pcs. x 1.84m 1 pcs. x 2.05m 1 pcs. x 2.25m 7 pcs. x 2.28m 1 pcs. x 2.46m 2 pcs. x 2.50m 1 pcs. x 2.50m 1 pcs. x 2.60m 1 pcs. x 2.79m 5 pcs. x 3.00m 1 pcs. x 3.00m 1 pcs. x 3.34m 1 pcs. x 3.50m 4 pcs. x 3.64m 1 pcs. x 3.66m 1 pcs. x 3.70m 1 pcs. x 4.00m 1 pcs. x 4.00m 1 pcs. x 4.14m 1 pcs. x 4.26m 1 pcs. x 4.54m 1 pcs. x 4.57m 1 pcs. x 4.64m 1 pcs. x 4.72m 1 pcs. x 4.76m 1 pcs. x 4.87m 1 pcs. x 4.97m 2 pcs. x 5.00m 15 pcs. x 5.00m 1 pcs. x 5.06m 1 pcs. x 5.14m 1 pcs. x 5.14m 1 pcs. x 5.41m 1 pcs. x 5.59m 16 pcs. x 6.00m Turnouts: Left 14 and right 26 Curves: in various angles and radi: 30 pcs. Climbing drives: 2 pcs. Horizontal drives with matching curves: 2 pcs. The displayed price is not the total price, it is the product price Optionally available: Supports Side guides Bedpfx Aopvu Abofwedg All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Just contact us by phone or by mail. Our complete product range can also be found on our website with customized filter option We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW product height: max. ± 120 mm Bdedpfjzvcquex Afwjg

Condition: used, FlowCook all stainless steel Bdedpfszvbzfex Afwsg suitable for thermal oil heating (300kW) belt length ± 13.000 mm belt width ± 600 mm outfeed conveyor belt washing system electric hoists for the lid steam pressure : 4-8 bar outside dimensions (l x w x h) : ± 15.000 x 2.200 x 3.000 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, total length: 5,000 mm, total width: 1,500 mm, type of input current: three-phase, year of last overhaul: 2024, working width: 1,500 mm, We are offering this very well-maintained Tesoma Compact gas dryer tunnel, 1.50 m wide, year of manufacture 2009. If you have any questions or would like more information, please feel free to send us a message or call us. Transport to be arranged by the buyer, price excluding VAT. Bsdpsy Icdhsfx Afwedg

Condition: ready for operation (used), Gildemeister CNC lathe Model CTX 320 Linear Year : 2003 Working length : 600 mm. Max. working diameter : 245 mm. Spindle speeds : 6000 rpm. Spindle bore 80 mm Spindle speeds on the Sub spindle : 4000 rpm. Bdedpfx Afszu R E Dowjg Spindle borer : 65 mm. Number of tools : 12 pcs. No. of rotating stations : 12 pcs. Spindle speeds rotating tools : 5000 rpm. X-axis travel : 160 mm. Z Travel : 450 mm. Y-axis travel : +/- 35 mm. Control : Siemens Cycle hours : 29000 Equipped with : -Subspindle -ECO LM 65 loader -2 straight rotating tool -2 angle rotating tool -6 holder -Chuck -Manuals

Condition: used, Year of construction: 2024, x-travel 400 mm y-travel 400 mm z-travel 375 mm Bdedpfezvhm Isx Afwjg control Siemens 840D sl Linear

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Featured with: - Chipconveyor - Cooling through spindle 40 Bar Bdsdpfx Afeyac Tlswsg - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: good (used), Year of construction: 2006, A very fast, continuous 5-axis milling machine. Designed primarily for smaller, complex parts requiring extensive machining. This machine enables continuous 5-axis milling with high repeatability. It delivers tireless performance thanks to its linear motor and glass scale measuring system, which ensure strict tolerances. Including: High-pressure coolant up to 40 bar Programmable B-axis and C-axis Heidenhain 3D touch probe Tool measurement X axis 500 mm Bedpfx Aozvfn Asfwodg Y axis 450 mm Z axis 400 mm Spindle speed 18000 rpm Tool capacity 60 CNC Control Heidenhain TNC530i Tool changer/magazine SK40 Viewing in operation is possible upon appointment. Availability: 10/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.