Used Lr 1005/1600/H110 Mm for sale (71,755)

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) Ljdpfx Aeyxdwdokuorl • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, overall weight: 5,900 kg, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system Ledjx D E Dyspfx Akusrl • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information Screw Diameter: 400 unit: 35 / 40 / 45 mm Injection Pressure (Max.): 400: 2500 / 2000 / 1580 bar Shot Weight (Max. g PS): 400: 141 / 184 / 232 g Heating Output 400: 9.7 kW | 5 zones Net Machine Weight: 400: 5900 kg

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Lredpfxsw Rqwto Akusl

Year of construction: 2006, condition: ready for operation (used), A Precicut CNC laser precision machining system is available. 1) Fiber laser IPG Photonics YLR-150/1500-QCW-MM, year of manufacture: 2012, average laser power: 150W, pulse power: 1.5kW. 2) Collimator d25 f50, year of manufacture: 2012, focal length: 50mm, diameter: 25mm. 3) Coupling module for BAK 4, year of manufacture: 2012. 4) ProCom CNC300 control unit. Documentation available. On-site inspection is possible. Ljdpjwqqwbsfx Akusrl

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN503674, Year of construction: 2015, operating hours: 6,784 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,651 mm, load center: 500 mm, fuel type: gas, mast type: triplex, construction height: 2,241 mm, power: 30 kW (40.79 HP), gearing type: converter, DGUV certified until: 01/2027, fork length: 1,150 mm, tire condition: 80 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 2,958 kg, empty load weight: 2,958 kg, total height: 2,241 mm, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €13,000 net €15,470 gross SKU: 440 Basic Information: - Manufacturer: Jungheinrich - Model: TFG 316 - Year of manufacture: 2015 - Operating hours: 6,502 h Technical Specifications: - Drive: LPG (liquefied petroleum gas) - Transmission: Torque converter - Pedals: Single pedal control - Control: Solopilot - Battery: - Charger: Mast / Dimensions: - Overall height: 2,241 mm - Lifting height: 5,000 mm - Free lift: 1,651 mm - Mast type: Triplex mast - Fork length: 1,150 mm - Rated capacity: 1,600 kg Lrjdpfxoyftudo Akujl - Load center: 500 mm Tyres: - Type: Superelastic tyres Hydraulic Equipment: - Sideshift: Integrated - Fork positioner: No - Rotator: No - Additional hydraulics: "No. 3 present and unassigned" Equipment: - Superstructure: - Lighting: - Safety equipment: - Heater: Extras: - UVV inspection available new on request - Immediately ready for operation - Inspection and test drive on site possible by appointment Transport: Low-cost shipping available on request. Invoice with VAT: You will always receive an invoice with VAT shown separately. Battery: For battery-powered equipment, we are happy to offer you an option including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email or the contact form.

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 30,700 mm Number of bays / row of shelves: 9 units of 3,300 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes 10x pallet rack uprights, used Material color: blue Upright type: A 103 Upright profile dimensions: P 100 x 79 x 3 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,000 mm high 1,100 mm deep 36x pallet rack beams, used Material color: orange Box profile: 120 x 50 mm Beam type: TB-S 120 clear width: 3,300 mm 72x integrated locking pin, used Material color: orange For securing the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Lrsdpfx Astukqiekuol 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Year of construction: 2017, Manufacturer: Kraus Year of manufacture: 2017 board length: 1600 board width: 1400 Roller diameter: 100 mm, material: steel. Axle distance between rollers: 120 mm Load capacity: 2000 kg Lifting height: 1700mm Without hydraulic power supply unit! Chain drive, with gear electric motor. Ljdpfx Asnr Hfyekujrl 1.1kW, 400V, 50Hz

Condition: good (used), Platform trolley, transport trolley, shelf trolley, sorting trolley, order picking trolley, mobile shelving unit, tray trolley, embroidery trolley -Width: 1010 mm -Depth: 690 mm -Height: 1600 mm -Number of subjects: 36 -Material: Stainless steel Lredpfx Asb A Rbqskuol -Sheet width: 460 mm -Quantity: 1 piece available -Weight: 45 kg

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Workbench: solid construction -Worktop: Steel plate, length 2085 mm -Base cabinet: 4 doors / 5 drawers / Layout/height see photos Ledpfxoxz A Iwe Akusrl -Transport dimensions: 2085/570/H1105 mm -Weight: 251 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders Lrjdoizc A Tjpfx Akusl -Manufacturer: GSL (German Standard Lift), hydraulic cylinder with control valve -Type designation: D160090AAV30392 T23 -Pipe Ø outside: 190 mm -Cylinder: Ø 160 mm -Stroke: 390 mm -Piston rod: Ø 90 mm -Hole diameter: Ø 65 mm -Dimensions: 840/200/H290mm -Weight: 112 kg

Condition: used, Workbench, work table, assembly bench Lrjdpfoffyp Djx Akuol -with: bench vice and 2 side tables -Workbench: 2045/720 mm, total height: 1100 mm -Vice: 380/150/H140 mm -Jaws: 115 x 20 mm, clamping width: 185 mm -Side tables: 500/500/H860 mm -Weight: 164 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 300 mm -Type: J-3LRLS33M -Piston rod: Ø 35 mm -Bore: 82.6 mm -Dimensions: 550/140/H95 mm -Weight: 13.4 kg Lsdpfx Aksv N Exxeuorl

Condition: used, CNC control, control panel, machining center, server cabinet Lsdpfx Akofkq T Tousrl -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Condition: used, CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD Lrodpfsfkq T Ujx Akujl -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Condition: good (used), Furniture dolly, furniture dolly with plastic wheels, furniture transport trolley, transport trolley, platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -MDF blockboard: 19 mm -Swivel casters: 4 -Heavy-duty transport trolley -Load capacity: 200 kg Ledpfjc Uxwvjx Akuorl -Number: 1430 units available -Price for orders of 10 pieces: 15 EUR net/piece -Price for orders of 50 pieces: 13 EUR net/piece -Price for orders of 100 pieces: 11 EUR net/piece -Price: per piece -Dimensions: 910/425/H145 mm -Weight: 8.4 kg/piece

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -Manufacturer: SKF, V-belt pulley with 4 grooves SPA160-04 2517 -V-belt width: 13 mm -Receptacle: Ø 48 x 45 mm taper bushing SKF 2517 48 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 165 x 65 mm -Weight: 6.0kg Lrsdpfx Aksqfki Tsusl

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns -Punching dimensions: see photo -Dimensions: 180/75/H1100 mm -Weight: 2.0 kg Lodpfx Aou I Hpyjkuorl

Condition: used, Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-104 -Max. Working height: 600 mm Lrodpfx Aok Nfpgskujl -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 275/120/H795 mm -Weight: 8.7 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm Lsdpfxsgvwazo Akujrl -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Parker, hydraulic cylinder, stroke 625 mm -Type: U-3LRS33M -Piston rod: Ø 35 mm -Receiver: Shaft Ø 25 /10 mm -Cylinder: outer Ø 70 mm -Quantity: 2 cylinders available, different mounting plates (see photos) Lsdpfx Aegvv U Iekuorl -Price: per piece -Dimensions: 820/76/118 mm / 820/118/118 mm -Weight: 14.8 kg/pc.

Condition: new, Steinmeyer ball screw, Ø thread: 14 mm, pitch: 10 mm, Ø pin: 9 mm, Ø shaft: 25 / 20 / 15 / 12 mm, length shaft: 1710 mm, Ø ball cage: 39 mm, Ø flange: 62 mm, unused, 100% functional, scope of delivery as per photos Ljdpfx Aexah Nkokusrl

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Load capacity: 12000 kg Lrsdpfx Ajhrnbkskujl Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Year of construction: 2016, condition: like new (used), Double column CMG *Installation in floor level design Measuring range * X 6,000 , Y 1,600 , Z 2,500 [mm] * Overlap of the uprights in Y = 100 mm Uncertainty of measurement single column : 25 + L/70, max. 60 [µm] at L=6.000 mm Double stand : 50 + L/70, max. 100 [µm] at L=6,000 mm Lrjdsh T U Dfepfx Akuel Dynamics 3D traverse speed 400 mm/sec 3D acceleration 1200 mm/sec² Touch probe (per column) * Renishaw PH10M * Renishaw TP20+2 modules Control system (per stand) * WENZEL WPC2040 (Pantec Eagle Pro) Radio control unit * Hand control HT400 Software * POLYWORKS * alternative solutions possible Accessories * Calibration ball holder - 3 times equipped * stylus assortment * TP-20 modules * Calculator , Screen Keyboard (per stand) Services of the supplier * transport, commissioning , calibration , final inspection Warranty * 12 months from the date of acceptance

Condition: new, sheet length: 1100sheet thickness: 6motor: 7,5width: 2250length: 1750heigth: 1400Standard Accessories: NC control system Programmable motorized backgauge with 750 mm travel Shadow line illumination 1 pcs squaring arm with scale 2 pcs sheet support arms 1 pcs sheet support arm (for models 1106, 1306, 1505) Finger protection Ball transfer table Easy front access blade gap adjustment Ljdpfegh Ndmsx Akusrl Ballscrew mechanism Cut counter Portable foot control with emergency stop button Photocell safety sensor on rear guards

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2008, total length: 13,860 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension - BPW-Assen = Remarks = Groenewegen, 2008, BPW axles, Drum brakes = More information = Lredpfx Akey Tn Rwsusl Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Empty weight: 8.560 kg Carrying capacity: 32.440 kg GVW: 41.000 kg Registration number: OK-53-DL = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.