Used Macmon M 100 for sale (80,350)

Year of construction: 2019, condition: new, Wraparound heat-shinkable MIS - 65 1120 - 650 CW BK/T SP 127030 - 12200650026-040 Laedoih R Icspfx Aiqeg Prize per unit carton

Condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Lodpezc Iypsfx Aiqeag Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, x-travel 1000 mm y-travel 800 mm Ljdpfx Aoztfx Asiqjag z-travel 500 mm control Siemens 611

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Laodpfxjwcfgbj Aiqsg Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: 8071, functionality: fully functional, pressing force: 100 t, stroke length: 400 mm, overall weight: 21,000 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,000 mm, bending force (max.): 100 t, control type: CNC control, degree of automation: automatic, number of axes: 8, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, documentation/manual, finger protection, Used Warcom Dinamica 3000 x 100-ton press brake, year 2008, an industrial machine designed for complex and large-format bending operations thanks to its advanced configuration with 8 controlled rear axes (Y1-Y2-Z1 – Z2 – X1 – X2 – R – X). CNC DELEM DA65. With a bending length of 3000 mm and a bending force of 100 tons, this machine is ideal for medium and high-volume applications, with the ability to handle complex geometries and structural components. Key features: Bending force: 100 tons Bending length: 3000 mm 8 controlled rear axes: Y1, Y2, Z1, Z2, X1, X2, R, X → superior flexibility for complex bending operations Model: Opera Robust and reliable construction Year of manufacture: 2004 A highly versatile press brake, suitable for metalworking workshops and manufacturing companies that require power, precision, and multi-axis control in a single solution. Ljdezqtb Topfx Aiqoag

Condition: used, functionality: fully functional, Year of construction: 2020, The temperature control units from Regloplas are for sale: Ledpfxsziwmke Aiqjag Medium: Water Heating capacity: 9 kW Cooling capacity: 40 kW Operating temperature: max. 140 degrees Year of manufacture: 2020

Condition: like new (used), Pump name: KRTK 100-400/654UG1-S Year: 2016 Q (capacity): 76.39 m³/h Lodpfx Aou Up Rwsiqoag H (head): 51 m Motor power: 62 kW Speed: 1475 rpm

Condition: good (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, injection pressure: 1,600 bar, total length: 4,000 mm, total width: 1,300 mm, total height: 1,900 mm, overall weight: 4,400 kg, warehouse no.: 503730 manufacturer: ENGEL type: e-max 310-100 controller: LC 200 A01 year of construction: 2011 clamping force: 1000 kN distance between tie-bars h x v: 460 x 410 mm size of mould plates h x v: 650 x 600 mm min. mould height: 150 mm max. mould height: 450 mm max. open daylight: 800 mm opening stroke: 350 mm screw diameter: 35 mm Lasdjz Eabtepfx Aiqjg swept volume: 135 ccm injection pressure: 1600 bar equipment included incl. Spruepicker screen text german core pulling hydraulically 1x Anti vibration mounts mould heating 8x handling type: Angussentnahmegerät manufacture: ENGEL controller: ER-USP 5 year of construction: 2011 measures of machine l x w x h: 4m x 1.3m x 1.9m total weight: 4400KG

Condition: new, For sale: a new, unused Speck T-1001-200.0010 submersible pump with a 2.2 kW three-phase electric motor. This is an original spare part intended for industrial applications and coolant systems, among others. The pump comes from warehouse stock. The set includes the original accessories shown in the pictures. Pump technical data: Ledpfx Aiszvlk Rjqoag Manufacturer: Speck Type: T-1001-200.0010 Article number: HP00000419 ID: 42402 Serial number: 1002750337 Maximum flow rate: 100 l/min Maximum head: 50 m Pump speed: 2800 rpm Year of manufacture: 2024 Country of origin: Germany Weight: approximately 26 kg Motor technical data: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 230 V Δ / 400 V Y Current at 50 Hz: 8.6 A / 5.0 A Speed at 50 Hz: 2900 rpm Efficiency class: IE3 Protection class: IP54 Insulation class: F Mechanical size: BG90 Mounting position: IM V8 Condition: new, in stock. The pump, accessories, and their exact condition match the pictures.

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw The Parker Polyflex SMM100 is a specialized hose assembly machine designed for the precise assembly of ultra-high-pressure thermoplastic hose lines. A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. Lasdpszz S Ndofx Aiqog In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Aluminum silo (plastic granulate silo) standing on a base ring – used – designed for a bulk density of 0.6 kg/dm³ Laodpfeipyq Njx Aiqeg Volume: 100,000 liters Available quantity: 4 Diameter: approx. 3,500 mm Cylindrical height: approx. 9,900 mm Overall height: approx. 12,500 mm (+ 1,100 mm roof edge railing) Material: AlMg3 Bulk density: 0.6 kg/dm³ Roof slope of the upper section: 15° Equipment and connections: In the upper section: 1 x access and ventilation opening DN 600 with cover 1 x ventilation opening with cap 2 x flange DN 100 1 x block flange DN 50 1 x roof edge railing with handrail 2 x crane lugs On the shell: 1 x access door 850 x 2000 mm with ventilation slots 6 x pipe supports for filling pipe (without filling pipe) 1 x block flange DN 50 Various pipe penetrations in the area of the lower base ring The silo ends at the bottom in a 90° cone with flange DN 200 (discharge height: 1,000 mm). Additional cost: Two of the silos have a two-section ladder with fall protection (including 1 rest platform). The currently connected measuring and control technology is included in the above offer. However, no guarantee is given for its functionality! Please note that the two silos differ slightly in their connections and their positions. Otherwise, as per the images and drawing.

Year of construction: 2008, condition: good (used), ROTOFLEX VLI 330 Inspection – Slitting – Rewinding Machine Manufacturer: ROTOFLEX International Model: VLI 330 Year: 2008 Serial No.: VLI 3517 Working width class: 330 mm Electrical: 380 V / 50 Hz / 3 Phase Condition: Very good working condition Current status: Still in production Availability: Approx. 3 months, after installation of the owner's new finishing line BRAND-NEW INSPECTION TECHNOLOGY BST TubeScan – Installed / Replaced in 2025 The machine is equipped with a modern: BST TubeScan Digital Strobe 4000 Inspection System The complete camera / inspection system was replaced in 2025 and is therefore almost new. This represents a considerable added value compared to many older Rotoflex machines currently available on the used machinery market. Lodpfszww Ikex Aiqsag The system allows the operator to monitor the printed web during production and supports reliable quality control of finished labels. MACHINE APPLICATION The Rotoflex VLI 330 is designed for professional finishing and inspection of label material. Typical applications include: · Inspection of printed labels · Slitting of master rolls into finished rolls · Rewinding · Removal and correction of defective material · Quality control · Preparation of finished rolls for delivery · Processing of pressure-sensitive label materials · Paper and film label applications

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities Laedezmwdkopfx Aiqsg • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Laodpfx Aiszxt Snjqeg Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2023, operating hours: 68 h, Struers Discotom-100 – 2023 – only 68 operating hours – Struers warranty For sale: Struers Discotom-100, a professional, automatic laboratory cutting machine designed for the precise preparation of samples for metallographic analysis. The unit is from 2023 and is in very good condition. The machine has been used very little – the counter shows only 68 total operating hours. Key features: * Manufacturer: Struers * Model: Discotom-100 * Year of manufacture: 2023 * Operating hours: only 68 * Condition: very good, practically unused * Warranty: 12 months Struers warranty * Automatic, programmable cutting * Control of feed and sample positioning * Movable X/Y work table * Large working chamber for cutting larger and irregular parts Ljdozx Hq Dopfx Aiqoag * Adjustable blade rotation speed * Cooling system during cutting * Enclosed working chamber cover with a large window * Clear control panel * Designed for the precise cutting of metals and other materials before further metallographic preparation The Discotom-100 is a high-quality device used in quality control laboratories, materials laboratories, R&D departments, and in the metallurgical, automotive, and manufacturing industries. A major advantage of the offered unit is its very low operating hours – only 68 – and the one-year Struers warranty, which makes it an attractive alternative to purchasing a new machine. Delivery possible in January 2027.

Condition: excellent (used), Year of construction: 2015, Clamping force: 100 t Screw diameter: 40 mm Shot weight: 150 g Ledozypwpjpfx Aiqoag Shot volume: 165 cm3 \+ robot Sepro success 11 Type: Horizontal Drive: Electric

Year of construction: 1991, condition: used, Travel X/Y/Z: 850mm/435mm/210mm, vertical head adjustment: approx. 590mm, table dimensions X/Y: approx. 1570mm/500mm, max. table load: 250kg, spindle taper: Fehlmann SF32, max. spindle speed: 7100rpm, spindle power: approx. 5kW, drilling capacity in steel: 30mm, tapping capacity in steel: M20, control: Mach3 with touchscreen PC, weight: approx. 3000kg. The machine was subsequently retrofitted with a Mach3 control. An on-site inspection is possible. Laedpfx Aijzz Irbeqog

Year of construction: 2006, condition: ready for operation (used), A Pinacho CNC precision parallel lathe is available. Center height: 180mm, center width: 750mm-1000mm, turning diameter over guide bed/longitudinal slide/cross slide: 360mm/335mm/198mm, bed width: 250mm, bore: 42mm, speed: 4000rpm, feed X/Z: 10m/min, rapid traverse X/Z: 10m/min. Tailstock shank diameter: 58mm, tailstock shank length: 200mm, Morse taper: MK3, min. travel of moving/fixed steady rest: 10mm, max. travel of moving/fixed steady rest: 70mm/114mm, control: Fanuc 0i. Documentation available. On-site inspection is possible Laedpfswftcvox Aiqog

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, load capacity: 3 kg, arm reach: 703 mm, controller manufacturer: Motoman, controller model: NX100, type of input current: three-phase, Equipment: documentation/manual, Industrial robot Yaskawa Motoman YR-HP3 6-axis robot with NX100 controller for sale in good condition industrial robot: Yaskawa Motoman YR-HP3 + NX 100 control cabinet year of manufacture: 2005.06 Payload: 3 kg number of axes: 6 reach: 703mm robot weight: 45kg Repeatability 0.03 mm structure: articulated movement speed: J1: 210 °/s (3.67 rad/s) J2: 180 °/s (3.14 rad/s) J3: 225 °/s (3.93 rad/s) Lajdpfsv Ig Hnsx Aiqeg J4: 375 °/s (6.54 rad/s) J5 375 °/s (6.54 rad/s) J6 500 °/s (8.73 rad/s) controller: Motoman NX100 ERCS-HP3-AE00 year of manufacture: 2005.06 power supply: on request, automatic paint spray gun Walther Pilot WA200 can be applied to the robot with aluminum frame, glazed cabin, external control, safety light gate If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Laedpfx Aszmyufjiqjg Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 190 mm turning length: 503 mm control: Fanuc 31i - TA Travel x/z turret 1: 135 / 503 mm Travel Y1: 62 (± 31) mm Travel x/z turret 2: 135 /503 mm c-axis: Sp. 1 / 2 Spindle 1 RPM: 6000 1/min Spindle 1 Power: 11/7,5 kW Spindle 1 max. bar diameter: 42 mm Spindle 2 RPM: 6000 1/min Spindle 2 power: 11/7,5 kW Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 6000 1/min Turret 1 power rotary tools: 7,1 / 2,2 kW Turret No.2 stations / rotary tools: 12/12 Turret 2 tool RPM: 6000 1/min Turret 2 power rotary tools: 7,1 / 2,2 kW total power requirement: 53 kVA weight of the machine ca.: 5700 t dimensions of the machine ca.: 2,3 x 1,6 x 1,94 m Accerories Lodpfx Aozd T I Hjiqeag Chip conveyor right discharge Robot interface High precision cnc turning center, rotary tools and y-axis on upper turret, Robot loader for shafts. *

Condition: used, Year of construction: 2003, Second-hand machine Lsdpjzk N Naefx Aiqeag Year of manufacture: 2003 Features and technical specifications: - Flexible, pneumatic press with very short set-up times - The press consists of a sturdy press frame and an easily manoeuvrable press trolley - and the horizontal and vertical press sides - All controls are within easy reach - During pressing, the MPH 100 causes the press carriage to clamp – similar to a screw clamp - with 3 vertical press sides - with 2 horizontal press sides - Cabinet length 380–2,500 mm - Cabinet depth: max. 600 mm - Cabinet height 350–1,200 mm - Pressing force 3.6 kN per press side - Working height 600 mm - Weight 1.1 tonnes - Operating pressure 6 bar Availability: at short notice Storage location: 63934 Röllbach

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 Ljdpfxeypbwuo Aiqeag PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Mobile dust extraction unit AL-KO Mobil-Power-Jet 100 for use with woodworking machines. This compact dust extraction system is designed to be mobile and is suitable for extracting wood dust and chips directly at the machine. The rollers allow the unit to be used flexibly in different work areas. Technical data / Features Manufacturer: AL-KO Ledpfx Aszzadceiqoag Type: Mobil-Power-Jet 100 Year of manufacture: 2009 Manufacturer’s serial number: 2433338514 Item number: 195 426 Nominal volume flow: 700 m³/h Minimum volume flow: 565 m³/h Suction nozzle: Ø 100 mm Motor power: 0.75 kW Voltage: 230 V / 50 Hz Nominal speed: 2,850 rpm Nominal current: 4.85 A Protection class: IP54 Negative pressure: approx. 1,020 Pa Dust class: M Mobile / can be moved on rollers The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Transportation is possible for an extra charge! Technical data and features may vary. Errors, prior sale and changes are subject to confirmation. All information is provided without guarantee.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA100001570, functionality: fully functional, travel distance Z-axis: 180 mm, table length: 5,510 mm, table width: 1,620 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT Laedpfx Aiexmgr Rjqeg PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO